关键词: ITER, 第一壁, 铍铜热等静压, 钛铜扩散界面, 退火

Abstract:

As the ITER first wall Be/CuCrZr hot isostatic pressing (HIP) bonding intermediate transition layer, Ti/Cu layer can form a multi-layer intermediate metal phase, and defects such as cracks occur between the Ti/Cu metal phases. CuCrZr was used instead of Be, and a number of CuCrZr/Ti/Cu/CuCrZr joints were fabricated by the same HIP process as Be/CuCrZr to analyze the Ti/Cu joints. The effects of stress relief annealing on joint strength and defect distribution of the joints unannealed, annealed at 400°C and 500°C respectively were studied. The results show that three layers of Ti/Cu diffusion layers are formed on both sides of the intermediate titanium layer, namely Cu₄Ti, CuTi and CuTi₂. The thickness of Cu₄Ti on the pure copper side is thicker than that on the CuCrZr side, so that the crack is almost entirely distributed at the junction of Cu₄Ti and CuTi on the pure copper side where brittle fracture is easy to occur in the tensile samples. As the annealing temperature increases, the generation and propagation of cracks decreases.

Key words: ITER, First wall, Be/Cu, Ti/Cu, Hot isostatic pressing (HIP), Annealing