|
[1] Heuer S, Coenen J W, Pintsuk G, et al. Overview of
challenges and developments in joining tungsten and
steel for future fusion reactors [J]. Phys. Scr., 2020, T171:
014028.
[2] Chen J M, Liu X, Wang P H, et al. Progress in developing
ITER and DEMO first wall technologies at SWIP [J].
Nucl. Fusion, 2019, 60(1): 016005.
[3] 王平怀, 谌继明, 付海英, 等. 聚变堆结构材料低活性
铁素体/马氏体钢 CLF-1 研究进展 [A]. 中国核科学技
术进展报告(第二卷), 中国核学会, 2011 年学术年会论
文集 [C]. 北京: 中国核学会, 2011. 62-67.
[4] Wang J B, Lian Y Y, Feng F, et al. Microstructure of the
tungsten and reduced activation ferritic-martensitic steel
joint brazed with an Fe-based amorphous alloy [J].
Fusion Eng. Des., 2019, 138(1): 164-169.
[5] Cai Q S, Liu W S, Ma Y Z, et al. Microstructure, residual
stresses and mechanical properties of diffusion bonded
tungsten-steel joint using a V/Cu composite barrier
interlayer [J]. Int. J. Refract. Met. Hard Mater., 2015,
48(1): 312-317.
[6] Basuki W W, Aktaa J. Process optimization for diffusion
bonding of tungsten with EUROFER97 using a vanadium
interlayer [J]. J. Nucl. Mater., 2015, 459(4): 217-224.
[7] Zhong Z, Hinoki T, Nozawa T, et al. Microstructure and
mechanical properties of diffusion bonded joints between
tungsten and F82H steel using a titanium interlayer [J]. J.
Alloys Compd., 2010, 489(2): 545-551.
[8] Wang J C, Wang W, Wei R, et al. Effect of Ti interlayer
on the bonding quality of W and steel HIP joint [J]. J.
Nucl. Mater., 2017, 485(3): 8-14.
[9] Jung Y I, Kim H G, Lee D W, et al. HIP joining of
tungsten armor to ferritic-martensitic steel with a
zirconium interlayer [J]. Fusion Sci. Technol., 2017,
72(3): 523-529.
[10] Zhu W, Qiang J B, Wang Y M, et al. A Ti-Fe-Sn thin film
assembly for joining tungsten and reduced activation
ferritic-martensitic steels [J]. Mater. Des., 2017, 125(7):
55-61.
[11] Bachurina D, Vorkel V, Suchkov A, et al. Overview of the
mechanical properties of tungsten/steel brazed joints for
the DEMO fusion reactor [J]. Metals-Open Access
Metallurgy Journal, 2021, 11(2): 209.
[12] Kalin B A, Fedotov V T, Sevrjukov O N, et al.
Development of brazing foils to join monocrystalline
tungsten alloys with ODS-EUROFER steel [J]. J. Nucl.
Mater., 2007, 367-370(Part B): 1218-1222.
[13] Kalin B A, Fedotov V T, Sevrjukov O N, et al.
Development of rapidly quenched brazing foils to join
tungsten alloys with ferritic steel [J]. J. Nucl. Mater.,
2004, 329-333(Part B): 1544-1548.
[14] Prado J D, Sánchez M, Ureña A. Evaluation of
mechanically alloyed Cu-based powders as filler alloy for
brazing tungsten to a reduced activation ferriticmartensitic
steel [J]. J. Nucl. Mater., 2017, 490(16):
188-196.
[15] Oono N, Noh S, Iwata N, et al. Microstructures of brazed
and solid-state diffusion bonded joints of tungsten with
oxide dispersion strengthened steel [J]. J. Nucl. Mater.,
2011, 417(1): 253-256.
[16] Basuki W W, Aktaa J. Investigation on the diffusion
bonding of tungsten and EUROFER97 [J]. J. Nucl.
Mater., 2011, 417(1-3): 524-527.
[17] Chehtov T, Aktaa J, Kraft O. Mechanical characterization
and modeling of brazed EUROFER-tungsten-joints [J]. J.
Nucl. Mater., 2007, 367-370(Part B): 1228-1232.
[18] Inoue A, Wang X M, Zhang W. Developments and
applications of bulk metallic glasses [J]. Rev. Adv. Mater.
Sci., 2008, 18(1): 1-9.
[19] Geng Y X, Wang Y M, Qiang J B, et al. Composition
formulas of Fe-B binary amorphous alloys [J]. J.
Non-Cryst. Solids, 2016, 432: 453-458.
[20] Greer A L. Confusion by design [J]. Nature, 1993,
366(6453): 303-304.
|
