欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2022, Vol. 42 ›› Issue (1): 1-7.DOI: 10.16568/j.0254-6086.202201001

• 核聚变工程 •    下一篇

HL-2M 装置偏滤器冷却系统设计与分析

蒙建朋, 颉延风, 曹诚志, 李 强, 卢 勇, 查方正   

  1.  (核工业西南物理研究院,成都 610041) 
  • 收稿日期:2019-03-02 修回日期:2020-04-03 出版日期:2022-03-15 发布日期:2022-03-25
  • 作者简介:蒙建朋(1992–),男,天津人,硕士研究生,从事托卡马克装置工程研究。

Design and analysis on the HL-2M divertor cooling system

MENG Jian-peng, XIE Yan-feng, CAO Cheng-zhi, LI Qiang, LU Yong, ZHA Fang-zheng   

  1. (SouthwesternInstituteofPhysics,Chengdu610041)

  • Received:2019-03-02 Revised:2020-04-03 Online:2022-03-15 Published:2022-03-25

摘要: 建立了 HL-2M 装置偏滤器水冷流道的等效三维模型,模拟分析了冷却水系统负载的温度和压降。构建了冷却系统的一维流体模型,分析了冷却系统工程设计的水力参数,并与模拟结果进行了比较,结果符合得较好。 

关键词: HL-2M 装置, 偏滤器, 冷却系统, 水力参数

Abstract: The equivalent three-dimensional model of the HL-2M divertor water-cooling flow channel was established. The temperature and pressure drop of the cooling water system load were simulated. A one-dimensional fluid model of the cooling system was constructed, and its hydraulic parameters were analyzed. Compared with the simulation results, the results were in good agreement.

Key words: HL-2M tokamak, Divertor, Cooling system, Hydraulic parameters 

中图分类号: