The overall design and preliminary operational results of the liquid lithium loop driven by argon

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2015, Vol. 35 ›› Issue (2): 170-174.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

The overall design and preliminary operational results of the liquid lithium loop driven by argon

XUE Xiao-yan1, ZHANG Wei-wei1, ZUO Hao-yi1, OU Wei2, WANG Jian-qiang2, YANG Dang-xiao1, GOU Fu-jun2, ZHU Zhi-chuan3, CHEN chun-li2, PAN Yu-dong4, LI Ying5, CAO Xiao-gang2

(1. College of Physical Science and Technology Sichuan University, Chengdu 610064； 2. Institute of Nuclear Science and Technology Sichuan University, Chengdu 610064； 3. College of Electrical and Information Engineering Southwest University for Nationalities, Chengdu 610041； 4. Southwestern Institute of Physics, Chengdu 610041； 5. Institute of Fusion Science Southwest Jiaotong University, Chengdu 611756)

Online:2015-06-15 Published:2015-06-15

氩气驱动液态锂回路的总体设计及初步运行结果

薛晓艳，张卫卫，左浩毅，欧巍，王建强，杨党校，芶富均，朱志川，陈顺礼，潘宇东，黎颖，曹小岗

(1. 四川大学物理与科学技术学院，成都 610064；2. 四川大学原子核科学技术研究所，成都 610064； 3. 西南民族大学电气信息工程学院，成都 610041；4. 核工业西南物理研究院，成都 610041； 5. 西南交通大学聚变科学研究所，成都 611756)

作者简介:薛晓艳(1990-)，女，山西临县人，硕士研究生，从事液态锂回路的设计研究。
基金资助:
国家磁约束核聚变能发展研究专项(2013GB114003)；国家自然科学基金(11275135，11102221)

Abstract

Abstract:

In order to study the physical process of the interaction between plasma and free liquid lithium surface, a liquid lithium loop device driven by argon was built. The structural components, technical parameters and operational principle of the loop are mainly introduced, respectively. The loop is mainly constituted of the primary loop, the test section about the plasma interacting with liquid lithium and one cathode linear plasma device. At present, some preliminary simulation and experimental results were obtained in this loop.

Key words: Liquid loop device, Free liquid lithium surface, Plasma characteristics

摘要：

为了研究等离子体与自由液态锂表面相互作用的物理过程，建立了用氩气驱动的液态锂回路装置。介绍了建立的液态锂回路装置的组成部分、技术参数及运行原理。此回路主要由主回路、等离子体与液态锂相互作用试验段和单阴极高密度等离子体发生装置三部分组成。目前，此回路已取得一些初步的模拟结果和实验结果。

关键词: 液态锂回路, 自由液态锂表面, 等离子体特性

CLC Number:

TL62+6

XUE Xiao-yan1, ZHANG Wei-wei1, ZUO Hao-yi1, OU Wei2, WANG Jian-qiang2,. The overall design and preliminary operational results of the liquid lithium loop driven by argon[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(2): 170-174.

薛晓艳，张卫卫，左浩毅，欧巍，王建强，杨党校，芶富均，朱志川，陈顺礼，潘宇东，黎颖，曹小岗. 氩气驱动液态锂回路的总体设计及初步运行结果[J]. 核聚变与等离子体物理, 2015, 35(2): 170-174.

References

[1] Deng B Q, Huang J H, Yan J C, et al. Study of the effects of liquid lithium curtain as first wall on plasma[J]. J.Nucl. Mater., 2003, 313−316: 630−635.
[2] Doerner R P, Baldwin M J, Krasheninnikov S I, et al.Behavior of high temperature liquid surfaces in contact with plasma [J]. J. Nucl. Mater., 2003, 313−316:383−387.
[3] Kaita R, Majeski R, Boaz M, et al. Spherical torus plasma interactions with large-area liquid lithium surfaces in CDX-U [J]. Fusion Engineering and Design,2002, 61−62: 217−222.
[4] Mirnov S. Plasma-wall interactions and plasma behaviour in fusion devices with liquid lithium plasma facing components [J]. J. Nucl. Mater., 390−391:876−885.
[5] Kugel H W, Bell M, Berzak L, et al. Physics design requirements for the national spherical torus experiment liquid lithium divertor [J]. Fusion Engineering and Design, 2009, 84(7): 1125−1129.
[6] 康伟山, 潘传杰, 许增裕. 液态金属自由表面在核聚变堆中的运用研究[J.]. 科学技术与工程, 2006, 6(6):731−738.
[7] Yang Q X, Zhang W L, Wang Y S, et al. Design of flowing liquid lithium device for HT-7 tokamak [J]. Fusion Engineering and Design, 2013, 88: 1646−1649.
[8] 邓柏权, 黄锦华, 严建成. 聚变堆与聚变堆材料/流动液态锂第一壁的物理可行性研究[R]. 成都: 核工业西南物理研究院年报, 2001. 48−50.
[9] Aiello A, Tincani A, Favuzza P, et al. Lifus (lithium for fusion) 6 loop design and construction [J]. FusionEngineering and Design, 2013, 88(6−8): 769−773.
[10] Ying A Y, Abdou M A, Morley N, et al. Exploratory studies of flowing liquid metal divertor options for fusion-relevant magnetic fields in the MTOR facility [J].Fusion Engineering and Design, 2004, 72: 35−62.
[11] Sugiura H, Kondo H, Kanemura T, et al. Development of velocity measurement on liquid lithium flow for IFMIF[J]. Fusion Engineering and Design, 2009, 84: 1803−1807.
[12] Mizuho Ida, Hodeo Nakamur, Hiroshi Nakamura, et al.Thermal-hydraulic characteristics of IFMIF liquid lithium target [J]. Fusion Engineering and Design, 2002,63−64: 333−342.
[13] Kondo Hiroo, Fujisato A, Yamaoka N, et al. Surface wave on high speed liquid lithium flow for IFMIF [J].Fusion Engineering and Design, 2005, 75−79: 865−869.
[14] Kanemura T, Kondo H, Yamaoka N, et al. Investigation of free-surface fluctuations of liquid lithium flow for.IFMIF lithium target by using an electro-contact probe[J]. Fusion Engineering and Design, 2007, 82:2550−2557.
[15] Kieran Mccarthy, Jimenez D, Roman R, et al.Scientific-technical report [R]. National Centre for Fusion Technologies, 2009.
[16] 钱家溥, 谌继明, 姜卫红, 等. 液态金属实验回路(LMEL)的总体设计和运行[J]. 核科学与工程, 1998,18(2): 132−138.
[17] 徐先龙, 钱家溥, 姜卫红, 等. 液态金属锂回路的总体设计及安装调试[J]. 核动力工程, 1994, 15(5):412−417.

The overall design and preliminary operational results of the liquid lithium loop driven by argon

氩气驱动液态锂回路的总体设计及初步运行结果

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	LIU Yan-wei1, 2, CAO Lei1, XU Tie-jun1, HAN Le1, ZI Peng-fei1, YAO Da-mao1. Microstructure characteristics and property in joint of graphite/copper alloy brazed by Ag-Cu-Ti liquid solder [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 148-154.
[2]	WU Jing, WANG Ping-huai, CHEN Ji-ming, YUAN Tao,ZHU Xiao-bo, LI Qian, GAO Hui, KANG Wei-shan. Preliminary design of pipe joint assembly type ITER enhanced heat load first wall [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 65-71.
[3]	WANG Kai-song1, BAI Yu-cheng1, GE Jian2. Preliminary design and thermal analysis of CFETR cryostat thermal shield [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(4): 343-347.
[4]	ZHAO Wei1, JIN Yu-zhong1, ZHOU Hong-xia1,ZHONG Guang-wu1, NIE Lin1, LIU Chun-jia2. Design and development of the Langmuir probe for ITER divertor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(3): 201-207.
[5]	ZHANG Yang1, 2, QIN Shi-jun1, CAO Lei1, CHEN Da-long1, YAO Da-mao1. Research on reliability of EAST upper divertor targets under halo currents [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(3): 221-226.
[6]	XU Hou-chang, LI Lei, YAO Da-mao, ZHOU Zi-bo, CAO Lei, Xu Tie-jun, HAN Le, ZI Peng-fei. Simulation on heat transfer of new type lower divertor in EAST [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(2): 127-133.
[7]	LIU Qi, MAO Shi-feng, WANG Zhong-wei, LIU Xu-feng, YE Min-you. Study on the effect of fin structure on heat transfer performance of hypervapotron structure [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(1): 48-54.
[8]	XIE Jin-yu, LI Jia-xian, ZHENG Guo-yao, DUAN Xu-ru. System code costing analysis of CFETR [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(4): 437-445.
[9]	ZHANG Jian-wu, PENG Xue-bing, MAO Xin, YE Min-you, QIAN Xin-yuan. Structural analysis and fatigue life evaluation for W/RAFMs divertor target [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(4): 452-458.
[10]	CHA Fang-zheng, LI Yong, LI Qiang, QIU Yin, LU Yong. Thermal load analysis for cryopump of HL-2M tokamak in pumping condition [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(3): 287-292.
[11]	KANG Wei-shan, CHEN Ji-ming, WU Ji-hong, YUAN Tao, WANG Ping-huai. Thermal conduction calculation and analysis of artificial defect mock-up for ITER shield blanket first wall [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(3): 299-304.
[12]	CHANG Xiao-bo1，SONG Yun-tao2，PENG Xue-bing2，MAO Xin2 . Structural design and analysis of a molten-salt-cooled divertor target for fusion reactor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(3): 329-333.
[13]	CAO Jian-yong, ZHOU Hong-xia, LIU He, YANG Xian-fu, YU Pei-xuan, WEI Hui-ling. Development of deflecting magnet for HL-2M 5MW-NBI beam line [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(4): 411-417.
[14]	LENG Zhen, KANG Wei-shan, CHEN Ji-ming. Thermal hydraulics design and analysis for ITER shield block vacuum hot helium leakagedetection equipment [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(3): 297-301.
[15]	LI Xiang-bin, LI Chang-jun, ZHU Da-huan, CHEN Jun-ling. Thermo-mechanical response simulation and analysis of W material under fusion related transient heat flux [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(3): 308-312.