Design and analysis of ITER dummy load

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2014, Vol. 34 ›› Issue (2): 159-164.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Design and analysis of ITER dummy load

QIN Xiu-qi1, XU Ning1, SONG Zhi-quan2, CHEN Xiang-bo1, LI Chuan3

(1. School of Electric and Automatic Engineering, Hefei University of Technology, Hefei 230009; 2. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031; 3. College of Electric & Electronic Engineering, Huazhong University of Science and Technology,Wuhan 430074)

Received:2013-06-13 Revised:2013-12-06 Online:2014-06-15 Published:2014-06-16

ITER假负载的设计与分析

秦秀颀1，徐宁1，宋执权2，陈湘波1，李传3

(1. 合肥工业大学电气与自动化工程学院，合肥 230009 ； 2. 中国科学院等离子体物理研究所，合肥 230031； 3. 华中科技大学电气与电子工程学院，武汉 430074)

作者简介:秦秀颀(1990-)，男，安徽合肥人，硕士研究生，电力电子与电力传动专业。
基金资助:
ITER计划极向场变流器电源系统设计及国内集成(科技部国际项目)

Abstract

Abstract:

The ITER dummy load is designed as multilayer multiturn structure. Setting up coil’s structure model by using ANSYS, the dynamic stability analysis and thermal stability analysis are conducted under rated current mode 7.75kA as well as pulsed current mode 68kA. The analysis results can verify the reasonability of dummy load with this structure and lay the foundation for the further optimization.

Key words: ITER dummy load, Reactor, Thermal stability, Dynamic stability, Pulsed current mode

摘要：

采用多层线圈并联，每层多匝的结构设计出ITER假负载。通过ANSYS建立该线圈的结构模型，对额定电流7.75kA连续运行和68kA脉冲电流运行两种模式下进行了动力学稳定性和热稳定性分析。分析结果验证了该线圈结构的假负载的设计合理性，为其进一步的优化设计奠定了基础。

关键词: ITER假负载, 电抗器, 热稳定性, 动力学稳定性, 脉冲电流运行模式

CLC Number:

TM478

QIN Xiu-qi1, XU Ning1, SONG Zhi-quan2, CHEN Xiang-bo1, LI Chuan3. Design and analysis of ITER dummy load[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(2): 159-164.

秦秀颀1，徐宁1，宋执权2，陈湘波1，李传3. ITER假负载的设计与分析[J]. 核聚变与等离子体物理, 2014, 34(2): 159-164.

[1]	WANG Fen, ZHANG Long, CAO Qi-xiang, ZHAO Feng-chao, ZHOU Bing, WANG Yan-ling. Research and design of nuclear safety system for magnetic confinement fusion reactor [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 49-57.
[2]	HAN Jia-jia , WANG Wei-hua , PU Wen-jing , JIANG Hai-yan , CHU De-lin , SHI Bo. Numerical simulation on transport characteristics of tritium loaded thermomagnetic fluid in rectangular duct [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 161-168.
[3]	GONG Zheng, HAN Song-bo , NI Xiao-jun , GE Jian , HUANG Jian-jun , YU Bin, GAO Xiang, SUN Jin-xing. Structural stability analysis of CFETR vacuum vessel based on finite element method [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 38-42.
[4]	SUN Jin-xin, NI Xiao-jun, GE Jian, HAN Song-bo, GONG Zheng. Electromagnetic structure coupling analysis of CFETR vacuum vessel under major disruption event [J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 308-313.
[5]	JIN Huan, WU Yu, SHI Yi, QIN Jing-gang, LIU Chen, DAI Chao, ZHANG Yong-liang, , LIU Hua-jun. CFETR feeder conductor design and thermal stability performance evaluation [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 182-186.
[6]	WANG Lei, ZHANG Xiu-jie, PAN Chuan-jie, XU Zeng-yu, ZHAO Yao, WANG Fan . Research on quasi two-dimensional MHD turbulence model of liquid blanket in fusion reactor [J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 21-25.
[7]	WANG Yan, , , ZHANG Xi-yang, ZHOU Zi-bo, , YAO Da-mao. Study on cutting first wall tungsten material for fusion reactor by premixed abrasive jet [J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 85-90.
[8]	YU Zhi-wei1, 2, LU Kun1, GE Jian1, NI Xiao-jun1. Evaluation of electromagnetic loads on CFETR vacuum vessel mockup under major disruption events for different configurations [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(3): 227-232.
[9]	WANG Jun1, WANG Xiao-yu1, ZHANG Guo-shu2. Reactor core parameter study of fusion nuclear science facility based on normal conductor Tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 109-116.
[10]	HE Ping-ni1, 2, WEI Jian-jun3, WANG Zhi-jun4, ZHANG Kun1, GOU Fu-jun1. Corrosion of low activation ferritic/martensitic steel CLF-1 in liquid tin [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 129-134.
[11]	WANG Jun, WANG Xiao-yu. Tritium start-up inventory and tritium balance analysis of China Fusion Engineering Testing Reactor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 34-39.
[12]	GUO Liang-liang1, SUN Jin-xin1, LIU Su-mei1, 2, LU Ming-xuan2, NI Xiao-jun2, SHI Ming-ming2. Three-dimensional tolerance analysis of China Fusion Engineering Test Reactor vacuum chamber based on CETOL platform [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 79-84.
[13]	LIU Xiao-chuan1, 2, LIAO Guo-jun3, ZHU Chao3, WU Yu1,QIN Jing-gang1, ZOU Hong-fei2, LIU Sheng4. Mechanical performance study of copper tube of ITER in-vessel coil conductor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(4): 348-351.
[14]	ZHU Zi-yang1, YE Min-you1, MAO Shi-feng1, LIU Xu-feng2. Development of the optimization design workflow for thermal shield based on parametric model [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(3): 256-264.
[15]	HU Zhi-qiang, ZHAO Feng-chao, WU Xin-hua, LIAO Hong-bin, WANG Xiao-yu, FENG Kai-ming. A preliminary study of microstructure and properties about CLF-1 steel and 316L TIG welding joint used for fusion reactor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(4): 446-451.

Design and analysis of ITER dummy load

ITER假负载的设计与分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics