Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2008, Vol. 28 ›› Issue (3): 218-222.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

ZHU Yin-feng, WU Song-tao, WU Wei-yue, XU Hou-chang, LIU Chang-le

(Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)

Received:2007-08-12 Revised:2008-03-03 Online:2008-09-15 Published:2011-03-03

FAIR收集环超导二极磁体支撑设计与热负荷分析

朱银锋，武松涛，吴维越，徐厚昌，刘常乐

(中科院等离子体物理研究所，合肥 230031)

作者简介:朱银锋(1973-)，男，河南省潢川县人，中科院等离子体物理研究所博士研究生，从事电物理装置结构与分析研究。
基金资助:
国际科技合作项目(MOU-GSI-ACC-2005-01)

Abstract

Abstract:

In order to meet the requirement of the Collector ring (CR) dipole superconducting magnet of FAIR in the process of operation, meanwhile, and to ensure the heat loads coming from the support structures to be lower than the design demands, the 3D models of support structures have been constructed with CATIA, then the calculation of low-temperature heat-load and the structure analysis have been done with ANSYS, the support structure material, 316LN+G10, is decided according to the heat-load calculation and the structure optimization, these results are necessary for manufacturing the formal magnet.

Key words: Collector ring, Superconducting dipole magnet, Finite element analysis, Heat load

摘要：

为保证FAIR收集环(Collector ring-CR)超导二极磁体工作过程中的磁场位形符合设计要求，同时保证由磁体支撑带来的热负荷小于设计要求，用CATIA软件建立了不同结构的磁体支撑3D模型，并用ANSYS有限元分析软件对建立的模型进行了低温热负荷分析和结构分析。通过比较分析的结果和对磁体支撑结构进行的进一步优化，确定了316LN+G10材料的支撑结构，为收集环超导二极磁体工程制造提供了参考。

关键词: 收集环, 超导二极磁体, 有限元分析, 热负荷

CLC Number:

TL62+6

ZHU Yin-feng, WU Song-tao, WU Wei-yue, XU Hou-chang, LIU Chang-le. Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2008, 28(3): 218-222.

朱银锋，武松涛，吴维越，徐厚昌，刘常乐. FAIR收集环超导二极磁体支撑设计与热负荷分析[J]. 核聚变与等离子体物理, 2008, 28(3): 218-222.

[1]	QU Miao, YAN Sha. Study on dependence of tungsten primary crack on pulse width time under transient heat flow [J]. Nuclear Fusion and Plasma Physics, 2024, 44(2): 206-213.
[2]	QU Miao, YAN Sha. Study on recrystallization of tungsten under transient heat loads [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 58-64.
[3]	LI Ren-jie, WEI Hui-xiang, LI Cheng, XU Zhuang, WANG Wen-shan, WANG Liang, BI Feng. Structure design and analysis of feeder in CFETR toroidal field coil [J]. Nuclear Fusion and Plasma Physics, 2021, 41(4): 623-627.
[4]	WEI Hai-hong, LI Peng-yuan, ZHANG Teng, XU Dan, XU Wan-yun, SUN Zhen-chao, LUO rong-rong . Optimization design and manufacture of cooling system for ITER PF6 magnet support [J]. Nuclear Fusion and Plasma Physics, 2021, 41(4): 635-641.
[5]	ZHOU Yue, ZHENG Guo-yao, DU Hai-long, PAN Yu-dong, LI Jia-xian, XUE Lei, PAN Wei，HUANG Wen-yu, XUE Miao, PENG Yuan-yuan, QU Cheng-hai. Simulation and analysis of the effect of pumping on carbon impurity distribution in HL-2M conventional divertor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 97-104.
[6]	ZHUANG Qing1, 2, MING Ting-feng1, YU Yao-wei1, LIU Yu-kai1, 2, ZHOU Fan1, 2, LONG Fei-fei1, 2, YANG Lei1, LI Yi-long1, 2, WANG Yu-min1, LIU Shao-cheng1, LIU Hai-qing1, LI Guo-qiang1, GAO Xiang1, 2. Experimental study on heat load of plasma-facing components by the calorimetry system in the EAST tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(3): 222-226.
[7]	TAO La-bao1, 2, YANG Qing-xi1, XU Hao1, LI Ning1,CHEN Jian1, LU Kun1, ZHOU Cai-pin3. Demonstration and calculation of rupture discs in vacuum vessel pressure suppression system of CFETR [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 162-167.
[8]	WU Jing, WANG Ping-huai, CHEN Ji-ming, YUAN Tao,ZHU Xiao-bo, LI Qian, GAO Hui, KANG Wei-shan. Preliminary design of pipe joint assembly type ITER enhanced heat load first wall [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 65-71.
[9]	ZHANG Jian-zhong, CHEN Ke, WANG Yan. Structural design and strength analysis of supporting rib in ITER vacuum vessel [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(4): 441-445.
[10]	XIA Zhi-wei, LI Wei, LI Bo. Estimation of magnetic force exerted on shield in gradient DC magnetic field [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(1): 48-51.
[11]	ZHANG Teng, LI Peng-yuan, SUN Zhen-chao, XU Dan, HAN Shi-lei, WANG Yao. Welding scheme optimization for the U-shaped flexible clamps of ITER poloidal field coil supports [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(1): 30-34.
[12]	WANG Zhen,SONG Yun-tao,YANG Qing-xi,SHI Shan-shuang,XU Hao,WAN Shu-de,LI Hong,LIU Wan-dong. Strength analysis and optimal design of KTX vacuum vessel support system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(4): 367-373.
[13]	ZHU Yin-feng, WU Wei-yue, LIU Chang-le. Conceptual design of current leads for dipole superconducting magnet for collector ring of FAIR [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2010, 30(2): 162-165.
[14]	XIA Zhi-wei, LI Wei, LU Jie, LI Bo. Analysis of magnetic shielding performance for ITER gas valve boxes by finite element method [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2009, 29(4): 353-356.
[15]	LONG Feng, LIU Fang, SHI Yi, WU Yu. Quench-protection system design and analysis of superconducting dipole magnet for FAIR [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2008, 28(4): 333-336.

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

FAIR收集环超导二极磁体支撑设计与热负荷分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics