自由液态锡表面结构的流体模型

doi:10.16568/j.0254-6086.201602015

摘要/Abstract

摘要：

应用SolidWorks 和ANSYS 软件设计了自由液态锡表面流体结构模型，计算了初始流速和热通量不同时液态锡的速度变化和温度变化，得到了流动液态锡的速度分布和温度分布。结果表明，垂直流动方向液态锡流速较为均匀，沿流动方向液态锡流速逐渐增大、液态锡液面厚度逐渐变薄。初始温度为600K 的条件下，热通量为1MW·m⁻² 时，液态锡出口温度为623.38K；热通量为5MW·m⁻² 时，液态锡出口温度为720.18K。在相同条件下使用液态锂作为计算流体，结果表明出口处液态锂的温度低于液态锡的温度。

关键词: 液态锡, PFC, 热通量, 偏滤器

Abstract:

The structure model of the free flow liquid tin is designed by SolidWorks software, the speed changes and temperature changes of liquid tin are calculated under different initial velocity and heat flux by ANSYS software, and the velocity distribution and temperature distribution of liquid tin has been obtained. Also, the calculated results show that velocity of liquid tin is relatively uniform at the perpendicular to the flow direction, while the velocity of liquid tin increase and the liquid level of liquid tin attenuate gradually along flow direction. Under the condition of initial temperature of liquid tin is 600K,if the heat flux is 1 MW·m^-2,the temperature of liquid tin at outlet is 623.38K; if the heat flux is 5 MW·m⁻², the temperature of liquid tin at outlet is 720.18K.When the liquid lithium as calculated fluid under the same conditions,the results show the temperature of liquid lithium is much lower than that of liquid tin.

Key words: Liquid tin, PFC, Heat flux, Divertor

中图分类号:

TL33

朱志川1，芶富均2，黄毅1，苗峰1，张传武*1. 自由液态锡表面结构的流体模型[J]. 核聚变与等离子体物理, 2016, 36(2): 188-192.

ZHU Zhi-chuan1, GOU Fu-jun2, HUANG Yi1, MIAO Feng1, ZHANG Chuan-wu1. Fluid model of the free liquid tin surface structure[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2016, 36(2): 188-192.

参考文献

[1] Nygren R E, Rognlien T D, Rensink M E, et al. A fusion reactor design with a liquid first wall and divertor [J].Fusion Engineering and Design, 2004, 72: 181−221.

[2] Narula M, Abdou M A, Ying A, et al. Exploring liquid metal plasma facing component (PFC) concepts——liquid metal film flow behavior under fusion relevant magnetic fields [J]. Fusion Engineering and Design, 2006, 81: 1543−1548.

[3] Hassanein A. Modeling hydrogen and helium entrapment in flowing liquid metal surfaces as plasma-facing components in fusion devices [J]. J. Nucl. Mater., 2002,302: 41−48.

[4] Jaworski M A, Gerhardt S P, Morley N B, et al. Macro -scopic motion of liquid metal plasma facing components in a diverted plasma [J]. J. Nucl. Mater., 2011, 415:985−988.

[5] 康伟山, 潘传杰, 许增裕. 液态金属自由表面在聚变堆中的运用研究 [J]. 科学技术与工程, 2006, 6:730−738.

[6] 邓柏权. 聚变堆物理——新构思与新技术 [M]. 北京:中国原子能出版社, 2013. 112−119.

[7] Jaworski M A, Khodak A, Kaita R. Liquid-metal plasma-facing component research on the National
Spherical Torus Experiment [J]. Plasma Phys. Contr.Fusion, 2013, 55: 1−10.

[8] Coenen J W, Temmerman G De, Federici G, et al. Liquid metals as alternative solution for the power exhaust of future fusion devices: status and perspective [J]. Physica Scripta, 2014, 159: 1−7.

[9] 张秀杰, 许增裕, 潘传杰, 等. 液态金属自由表面膜流MHD 效应的数值模拟 [J]. 核聚变与等离子体物理,2008, 28(1): 28−33.

[10] 邓柏权, 黄锦华, 彭利林, 等. 聚变堆包层流动锂液帘与堆芯兼容性评估 [J]. 核聚变与等离子体物理, 2003,23(3): 170−175.

[11] Allain J P, Nieto M, Coventry M D, et al. Studies of liquid-metal erosion and free surface flowing liquid lithium retention of helium at the University of Illinois[J]. Fusion Engineering and Design, 2004, 72: 93−110.

[12] Baldwin M J, Lynch T, Chousal L, et al. An injector device for producing clean-surface liquid metal samples of Li, Ga and Sn-Li in vacuum [J]. Fusion Engineering and Design, 2004,70: 107−113.

[13] Conn R W, Doerner R P, Sze F C, et al. Deuterium plasma interactions with liquid gallium [J]. Nucl. Fusion,2002, 42: 1060−1066.

[14] Mirnov S V, Evtikhin V A. The tests of liquid metals (Ga,Li) as plasma facing components in T-3M and T-11M tokamaks [J]. Fusion Engineering and Design, 2006, 81:113−119.

[15] Assael M J, Kalyva A E, Antoniadis K D, et al. Reference data for the density and viscosity of liquid copper and liquid tin [J]. Journal of Physical and Chemical Reference Data, 2010, 39: 033−040.

[16] Morgan T W, Van den Bekerom D C M, De Temmerman G. Interaction of a tin-based capillary porous structure with ITER/DEMO relevant plasma conditions [J]. J. Nucl.Mater., 2015, 463(8): 1256–1259.

[17] Coventry M D, Allain J P, Ruzic D N. D+, He+ and H+ sputtering of solid and liquid phase tin [J]. J. Nucl. Mater.,2003, 313−316: 636−640.

[18] Coventry M D, Allain J P, Ruzic D N. Temperature dependence of liquid Sn sputtering by low-energy He+ and D+ bombardment [J]. J. Nucl. Mater., 2004, 335:115−120.

[19] Brooks J N. Modeling of sputtering erosion/redeposition-status and implications for fusion design [J]. Fusion Engineering and Design, 2002, 60: 515−526.

[20] Brooks J N, Rognlien T D, Rozic D N, et al. Erosion/rediposition analysis of lithium-based liquid surface divertors [J]. J. Nucl. Mater., 2001, 290−293: 185−190.

[21] Rognlien T D, Rensink M E. Edge-plasma properties in liquid-wall environments [J]. Contrib. Plasma Phys.,2002, 42(2−4): 193−198.

[22] Pacio J, Wetzel Th. Assessment of liquid metal technology status and research paths for their use as efficient heat transfer fluids in solar central receiver systems [J]. Solar Energy, 2013, 93:11−22.