|
[1] MOTOJIMA O. The ITER project
construction status [J]. Nuclear Fusion, 2015, 55(10): 104023
[2] TAKAHATA K, MORIUCHI S, OOBA K,
et al. Lessons learned from twenty-year operation of the large helical device
poloidal coils made from cable-in-conduit conductors [J]. Cryogenics, 2018, 91:
1-6.
[3] UGLIETTI D, SEDLAK K, WESCHE R,
et al. Progressing in cable-in-conduit for fusion magnets: from ITER to low
cost, high performance DEMO [J]. Superconductor Science Technology, 2018, 31(5):
055004.
[4] RUMMEL T, RISSE K, NAGEL M, et
al. Challenges for the wendelstein 7-X magnet systems during the next operation
phase [J]. IEEE Transactions on Plasma Science, 2018, 46(5): 1517-1521.
[5] DECOOL P, CIAZYNSKI D, NOBILI
A, et al. Joints for large superconducting conductors [J]. Fusion Engineering
& Design, 2001, 58(1): 123-127.
[6] 邹春龙, 宋云涛, 吴欢, 等. ITER 超导接头铜材热损耗实验研究 [J]. 低温工程, 2015(1): 34-36.
[7] DEVRED A, BACKBIER I, BESSETTE
D, et al. Challenges and status of ITER conductor production [J].
Superconductor Science & Technology, 2014, 27(4): 044001.
[8] YAGOTINTSEV K A, WESSEL W A J,
VOSTNER A, et al. Overview of verification tests on AC loss, contact resistance
and mechanical properties of ITER conductors with transverse loading up to
30000 cycles [J]. Superconductor Science & Technology, 2019, 32(10): 105015.
[9] PATEL D, KIM S H, QIU W, et
al. Niobium-titanium superconducting joints for persistent-mode operation [J].
Scientific Reports, 2019, 9(1): 1-7.
|
