欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2022, Vol. 42 ›› Issue (2): 182-186.DOI: 10.16568/j.0254-6086.202202002

• 核聚变工程 • 上一篇    下一篇

CFETR馈线导体设计与热稳定性分析

金 环1,武 玉1,施 毅1,秦经刚1,刘 辰1,戴 超1,张雍良1, 2,刘华军1   

  1. (1. 中国科学院等离子体物理研究所,合肥 230031;2. 中国科学技术大学,合肥 230026)
  • 收稿日期:2020-05-27 修回日期:2021-03-27 出版日期:2022-06-15 发布日期:2022-06-16
  • 作者简介:金环(1986-),女,安徽潜山人,副研究员,从事超导磁体技术研究。
  • 基金资助:
    国家重点研发计划(2017YFE0300503)

CFETR feeder conductor design and thermal stability performance evaluation

JIN Huan1, WU Yu1, SHI Yi1, QIN Jing-gang1,LIU Chen1, DAI Chao1, ZHANG Yong-liang1, 2, LIU Hua-jun1   

  1. (1. Hefei Institute of Physical Science, Chinese Academy of Sciences, Hefei 230031; 2. University of Science and Technology of China, Hefei 230026)
  • Received:2020-05-27 Revised:2021-03-27 Online:2022-06-15 Published:2022-06-16

摘要: CFETR馈线导体设计采用NbTi超导线材管内电缆(CICC)结构,其中超导电缆主要由6个花瓣形状的电缆和一个中间铜芯绞制而成,而花瓣形状的电缆由NbTi超导线材与铜线沿顺时针方向通过4级绞制而成,导体外部采用不锈钢铠甲结构。计算分析了运行工况下导体结构的热稳定性参数。结果显示,在95.6kA的最高载流下,分流温度低于6K,热点温度低于250K,满足设计要求。

关键词: CFETR馈线导体, 热稳定性, 分流温度

Abstract: The structure of feeder conductor is designed as a cable in conduit conductor (CICC), and the busbar is made up of six petal-like cables twisting in the clockwise direction around a centre copper core while petal-like cable is of the four-staged winding structure of compound lines formed by winding clockwise NbTi superconductor wires and copper wires. Its thermal stability performance is analyzed. Results show that the current sharing temperature is less 6K and hot temperature is less 250K under the maximum current with about 95.6kA, meeting design values.

Key words: CFETR feeder conductor, Thermal stability, Current sharing temperature

中图分类号: