Mechanical structure and support design for ITER PF superconducting busbar

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2007, Vol. 27 ›› Issue (3): 208-211.

• Research Report • Previous Articles Next Articles

Mechanical structure and support design for ITER PF superconducting busbar

ZHANG Yuan-bin1, WU Song-tao 2

(1. Mechanical Engineering Department, Hefei University, Hefei 230022; 2. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)

Received:2006-10-22 Revised:2007-02-25 Online:2007-09-15 Published:2011-08-15

ITER极向场超导母线机械结构及支撑设计

张远斌1，武松涛2

(1. 合肥学院机械系，合肥 230022；2. 中科院等离子体物理研究所，合肥 230031)

作者简介:张远斌(1974-)，男，安徽含山人，博士研究生，主要从事电物理装置设计与分析方面工作。
基金资助:
国际科技合作重点项目计划(基础研究部分)项目基金(2004CB720704)资助

Abstract

Abstract:

Mechanical structure and support design of ITER poloidal field busbar were expounded and stress analysis was carried out using FEA technique. According to the analytical results, preliminary support design was given and final support setup optimized with ANSYS code was achieved.

Key words: Superconducting busbar, Support, S-bend

摘要：

阐述了ITER极向场磁体系统超导母线的结构及支撑设计，用有限元分析法对结构进行了分析。获得了母线所受电磁力，据此初步设计了母线的支撑，通过ANSYS分析优化并最终确定了支撑布置位置。

关键词: 超导母线, 支撑, S形弯曲

CLC Number:

TL62+6
TH122

ZHANG Yuan-bin, WU Song-tao. Mechanical structure and support design for ITER PF superconducting busbar[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2007, 27(3): 208-211.

张远斌1，武松涛2. ITER极向场超导母线机械结构及支撑设计[J]. 核聚变与等离子体物理, 2007, 27(3): 208-211.

[1]	WANG Kai-song , DOU Cheng-long , DU Shuang-song , XU Wei-wei , XI Wei-bin. Optimal design and analysis of the supporting structure for EAST eight-pairs current lead tank [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 140-144.
[2]	HOU Bing-lin, LAI Xiao-qiang, XU Wan-yun, WEI Hai-hong . Preliminary concept design of the magnet supports for CFETR [J]. Nuclear Fusion and Plasma Physics, 2022, 42(4): 399-403.
[3]	QIAO Tao, LIU De-quan, LIN Tao, ZHENG Xiao-zhou, XU Wen-feng. Study on the magnetic permeability in support system component welding of HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 285-289.
[4]	LIU De-quan, QIAO Tao, LIN Tao, CAO Cheng-zhi, CAI Li-jun, LI Qiang . Design of support structure of HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 397-401.
[5]	LIN Tao, LIU De-quan, CAI Li-jun, LI Qiang, QIAO Tao . Design of the toroidal field coil preloading system on HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 415-419.
[6]	QIAO Tao, LIU De-quan, LIN Tao, ZHENG Xiao-zhou, HL-M Development Team . Manufacturing technology of HL-2M support system [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 420-424.
[7]	WEI Hai-hong, LI Peng-yuan, ZHANG Teng, XU Dan, XU Wan-yun, SUN Zhen-chao, LUO rong-rong . Optimization design and manufacture of cooling system for ITER PF6 magnet support [J]. Nuclear Fusion and Plasma Physics, 2021, 41(4): 635-641.
[8]	HOU Ji-lai, RAN Hong, TANG Le, HUANG Yun-cong, CAO Zeng, SONG Bin-bin. Research on forging and manufacturing process of HL-2M vacuum vessel support trunnion [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(3): 232-237.
[9]	DAI Huai-chu, YAO Da-mao. Structural design and simulation analysis of support structures for remote handling requirements of CFETR divertor module [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(3): 323-328.
[10]	XU Wan-yun, LI Peng-yuan, WEI Hai-hong, CHEN Hui, ZHANG Teng. Cooling pipe system of ITER’s poloidal field coil support [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(1): 69-73.
[11]	ZHANG Jian-zhong, CHEN Ke, WANG Yan. Structural design and strength analysis of supporting rib in ITER vacuum vessel [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(4): 441-445.
[12]	LIAO-Min, LI Peng-yuan, SUN Zheng-chao，SHU Run-tao. Welding technology of ITER PF support [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(3): 217-222.
[13]	LIAO Min1, LI Peng-yuan1, HOU Bing-lin1, PAN Chuan-jie1, CHI Cheng-fang2. Design of the measurement and control system of multi-dimensional loading system for ITER magnet supports [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(2): 114-119.
[14]	ZHANG Teng, LI Peng-yuan, SUN Zhen-chao, XU Dan, HAN Shi-lei, WANG Yao. Welding scheme optimization for the U-shaped flexible clamps of ITER poloidal field coil supports [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(1): 30-34.
[15]	WANG Zhen,SONG Yun-tao,YANG Qing-xi,SHI Shan-shuang,XU Hao,WAN Shu-de,LI Hong,LIU Wan-dong. Strength analysis and optimal design of KTX vacuum vessel support system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(4): 367-373.

Mechanical structure and support design for ITER PF superconducting busbar

ITER极向场超导母线机械结构及支撑设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics