Discharge simulation and volt-second consumption
analysis of neutral beam injection on CFETR

doi:10.16568/j.0254-6086.202203015

Nuclear Fusion and Plasma Physics ›› 2022, Vol. 42 ›› Issue (3): 354-360.DOI: 10.16568/j.0254-6086.202203015

• Plasma Physics • Previous Articles Next Articles

Discharge simulation and volt-second consumption analysis of neutral beam injection on CFETR

LU Ye¹, YANG Jin-hong¹, GUI Teng², REN Zhen-zhen³, LIU Sheng¹, NING Hong-wei², XU Jing-kun², SONG Qiang¹, DENG Hai-fei⁴, WANG Wei-hua^{1, 4}

(1. Institutes of Physical Science and Information Technology, Anhui University, Hefei 230039; 2. School of Computer Science and Technology, Anhui University, Hefei 230601; 3. School of Physics and Materials Science, Anhui University, Hefei 230601; 4. PLA Army Academy of Artillery and Air Defense, Hefei 230031)

Received:2020-08-10 Revised:2021-12-13 Online:2022-09-15 Published:2022-09-21

CFETR电流爬升阶段中性束注入伏秒数分析

陆野¹，杨锦宏^*1，桂腾²，任珍珍³，刘胜¹，宁洪伟²，徐敬坤²，宋强¹，邓海飞⁴，汪卫华^{1, 4}

(1. 安徽大学物质科学与信息技术研究院，合肥 230039；2. 安徽大学计算机科学与技术学院，合肥 230601；3. 安徽大学物理与材料科学学院，合肥 230601；4. 陆军炮兵防空兵学院，合肥 230031)

通讯作者: 杨锦宏(1977-)，男，安徽桐城人，硕士研究生导师，从事等离子体数值模拟研究。
作者简介:陆野(1997-)，男，河南驻马店人，硕士研究生，从事聚变等离子体数值模拟研究。
基金资助:
国家自然科学基金(11975022)；国家重点研发计划(2018YFE0309100，2017YFE0300603，2018YFE0310400)；安徽省自然科学基金(1908085MA26，2008085QA37)

Abstract

Abstract:

The free boundary axisymmetric tokamak code (TSC) evolving with time is used to numerically simulate the discharge in the current ramping stage of China fusion engineering experimental reactor (CFETR), and the main plasma parameters, plasma configuration and coil current evolutions are given. The volt second consumption of plasma current in the ramping process of CFETR current under the conditions of neutral beam injection (NBI) assisted heating and no auxiliary heating, and the effects of different neutral beam injection conditions are analyzed. The results show that about 10%-25% volt seconds can be saved by properly controlling the injection time and energy deposition profile of neutral beam particles. The simulation results have certain reference value for the engineering design of CFETR.

Key words: TSC; CFETR, NBI, Discharge simulation, Volt-second consumption

摘要：

利用随时间演化的自由边界轴对称托卡马克代码(TSC)对中国聚变工程实验堆(CFETR)电流爬升阶段的放电进行数值模拟，给出了主要的等离子体参数、等离子体位形演化和线圈电流演化，分析了等离子体电流在中性束粒子辅助加热(NBI)和无辅助加热条件下CFETR电流爬升过程的伏秒数消耗，以及不同的中性束注入条件下的影响。结果表明，适当控制中性束粒子的注入时间及能量沉积剖面可以节省伏秒数消耗10%~25%左右。模拟结果对CFETR的工程设计具有一定的参考价值。

关键词: TSC, 中国聚变工程实验堆, 中性束注入, 放电模拟, 伏秒数消耗

CLC Number:

TL62⁺2

LU Ye, YANG Jin-hong, GUI Teng, REN Zhen-zhen, LIU Sheng, NING Hong-wei, XU Jing-kun, SONG Qiang, DENG Hai-fei, WANG Wei-hua. Discharge simulation and volt-second consumption analysis of neutral beam injection on CFETR[J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 354-360.

陆野, 杨锦宏, 桂腾, 任珍珍, 刘胜, 宁洪伟, 徐敬坤, 宋强, 邓海飞, 汪卫华. CFETR电流爬升阶段中性束注入伏秒数分析[J]. 核聚变与等离子体物理, 2022, 42(3): 354-360.

References

[1] Jinxing Zheng, Xufeng Liu, Yuntao Song, et al. Concept design of CFETR superconducting magnet system based on different maintenance ports [J]. Fusion Engineering and Design, 2013, 88(11): 2960−2966.

[2] 高翔, 万宝年, 宋云涛, 等. CFETR物理与工程研究进展 [J]. 中国科学：物理学力学天文学, 2019, 49(4): 7−14.

[3] Cheng-Yue Liu, Bin Wu, Jin-Ping Qian, et al.Discharge simulation and volt-second consumption analysis during ramp-up on the CFETR tokamak [J].Chin. Phys. B, 2020, 29(2): 025202.

[4] Rongfei Wang, Jinhong Yang, Weihua Wang, et al. Plasma ohmic discharge simulation of CFETR [C]. IEEE, 2015.

[5] Rongfei Wang, Jinhong Yang, Weihua Wang, et al. Full time discharge simulationand plasma profile control for CFETR [J]. Journal of Fusion Energy,2015, 34(6): 1213−1504.

[6] Hai Xie, Roman Zagórski, Rui Ding, et al. Numerical analyses of impurity behaviors for CFETR advanced scenarios by core-edge integrated simulations [J]. Fusion Engineering and Design, 2020, 158: 111865.

[7] 徐玉平, 吕一鸣, 周海山, 等. 核聚变堆包层结构材料研究进展及展望 [J]. 材料导报, 2018, 17: 2897−2906.

[8] 吕中良. CFETR氮冷固态氚增殖剂包层中子学设计及性能研究 [D]. 合肥: 中国科学技术大学, 2016.

[9] Jardin S C, Bell M G, Pomphrey N. TSC simulation of Ohmic discharges in TFTR [J]. Nucl. Fusion, 1993, 33(3): 371−380.

[10] Jardin S C, Pomphrey N, Hoffmann F. Dynamic modeling of transport and positional control of tokamaks [J]. Journal of Computational Physics, 1986, 66(2): 481−507.

[11] Hofmann F, Pomphrey N, Jardin SC. Application of a new algorithm to plasma shape control in BPX [J]. Nucl. Fusion, 1992, 32(5): 897−912.

[12] Guo Y, Xiao B J, Wu B, et al. Experimental advanced superconducting tokamak ohmic discharge simulation by the tokamak simulation code [J]. Plasma Phys. Contr. F., 2012, 54(8): 78−91.

[13] Liu C Y, Wu B, Xiao B J, et al. Unidirectional ion source discharge [J]. Plasma Sci. Technol., 2008, 10(1): 8−11.

[14] Menard J E, LeBlanc B, Sabbagh S A, et al. Ohmic flux consumption during initial operation of the NSTX spherical torus [J]. Nucl. Fusion, 2001, 41(9): 1197−1206.

[15] EjimaS, CallisRW, LuxonJL, et al. Volt-second analysis and consumption in Doublet III plasmas [J]. Nucl. Fusion, 1982, 22(10): 1313−1322.

[16] Bandyopadhyay I, Ahmed S M, Atrey P K, et al. Modelling of Ohmic discharges in ADITYA tokamak using the Tokamak Simulation Code [J]. Plasma Phys. Contr. F., 2004, 46(9): 1443−1451.

[17] 李昊, 吴斌, 王进芳, 等. EAST 4MW中性束注入放电模拟研究 [J]. 核聚变与等子体物理, 2014, 34(1): 57−62.

[18] 王骥, 胡纯栋, 吴斌, 等. EAST不同密度剖面下中性束注入模拟研究 [J]. 核聚变与等离子体物理, 2012, 32(3): 193−198.

Discharge simulation and volt-second consumption analysis of neutral beam injection on CFETR

CFETR电流爬升阶段中性束注入伏秒数分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	SONG Qiang, YANG Jin-hong, GUI Teng, CHEN Kai-jie, XI Xu-yao, JIANG Zhong-he, WANG Wei-hua, YANG Qing-zhi. Electromagnetic-structure analysis of the resonant magnetic perturbation coils on J-TEXT [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 436-443.
[2]	YANG Xian-ke, , YIN Lei, YAO Da-mao. Design and analysis of the first wall on the NBI shine-through area of high magnetic field side of EAST [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 450-455.
[3]	LIU Zhi-min , WANG Jin-xin , ZHAO Yuan-zhe , XIE Ya-hong , XIE Yuan-lai. Research on EAST-NBI experimental data analysis system based on neural networks [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 191-198.
[4]	YI Wei , HU Chun-dong, , XIE Yuan-lai, , XIE Ya-hong, , LIU Wei , WEI Jiang-long , GU Yu-ming , LIANG Li-zhen, , TAO Ling , CUI Qing-long , ZHAO Yuan-zhe , JIANG Cai-chao , XU Yong-jian, . Design of constant temperature water supply system for CFETR N-NBI verification prototype [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 62-67.
[5]	SONG Qiang, YANG Jin-hong, LU Ye, GUI Teng, WANG Wei-hua. Discharge simulation and electromagnetic simulation analysis of CFETR snowflake divertor configuration [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 144-151.
[6]	CAO Jian-yong, WEI Hui-ling, GENG Shao-fei, HL-M NBI Team. Plan and research progress on the NBI heating system of HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 489-494.
[7]	HE Feng, CAO Jian-yong, WEI Hui-ling, LIU He, YANG Xian-fu, LI Jia-Xian, SONG Xian-ming. Magnetic field distribution surrounding HL-2M tokamak and magnetic shielding analysis for NBI device [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(4): 385-391.
[8]	CAO Jian-yong, ZHOU Hong-xia, LIU He, YANG Xian-fu, YU Pei-xuan, WEI Hui-ling. Development of deflecting magnet for HL-2M 5MW-NBI beam line [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(4): 411-417.
[9]	CHEN Yu-qian, XIE Ya-hong, HU Chun-dong, JIANG Cai-chao, CUI Qing-long. Design and analysis of electrical parameters of large area NBI RF ion source [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2016, 36(3): 243-246.
[10]	LIU Zhi-min, JIANG Cai-chao, LIU Sheng, XIE Ya-hong, HU Chun-dong. The power supply system of a prototype EAST ion source in the neutral beam injection test stand [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(2): 152-158.
[11]	YANG Xian-fu, XIE Wei-min, WEI Hui-ling, LIU He, ZOU Gui-qing, ZHANG Xian-ming, LI Ming, CAO Jian-yong. Gas target thickness and neutralization efficiency in HL-2A neutral beam injection [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(1): 6-11.
[12]	LI Hao, WU Bin, WANG Jin-fang , WANG Ji, HU Chun-dong. Numerical simulation of EAST discharge with NBI [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(1): 57-62.
[13]	CHEN Mei-xia, LIU Cheng-yue, WU Bin. Simulation on advanced operation mode for the compact fusion-fission hybrid reactor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2012, 32(4): 323-327.
[14]	WANG Ji, HU Chun-dong, WU Bin, WANG Jin-fang. Predictive simulation of neutral beam injection with different density on EAST [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2012, 32(3): 193-198.
[15]	CHEN Mei-xia1, 2, WU Bin1, ZHOU Xiao-lin2, LIU Cheng-yue1. Optimal analysis for the compact fusion-fission hybrid reactor parameters and discharge simulation [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2008, 28(3): 247-251.