基于参数化模型的内冷屏设计优化流程的开发

doi:10.16568/j.0254-6086.201903011

核聚变与等离子体物理 ›› 2019, Vol. 39 ›› Issue (3): 256-264.DOI: 10.16568/j.0254-6086.201903011

基于参数化模型的内冷屏设计优化流程的开发

朱紫阳1，叶民友1，毛世峰*1，刘旭峰2

(1. 中国科学技术大学物理学院，合肥 230026；2. 中国科学院等离子体物理研究所，合肥 230031)

出版日期:2019-09-15 发布日期:2019-09-16
作者简介:朱紫阳(1992-)，男，湖南省衡阳市人，硕士研究生，从事聚变堆冷屏设计研究。
基金资助:
国家磁约束核聚变能发展研究专项(2014GB110002)

Development of the optimization design workflow for thermal shield based on parametric model

ZHU Zi-yang1, YE Min-you1, MAO Shi-feng1, LIU Xu-feng2

(1. School of Physical Sciences, University of Science and Technology of China, Hefei 230026; 2. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)

Online:2019-09-15 Published:2019-09-16

摘要/Abstract

摘要：

在中国聚变工程实验堆(CFETR)集成设计平台(CIDP)的设计框架中，基于参数化模型开发了能够高效开展内冷屏设计优化的工作流程。通过OPTIMUS 软件驱动CATIA、ANSYS 等CAD/CAE 软件进行自动建模及有限元分析，利用响应面模型、敏感度分析等方法确定与优化目标关系密切的参数，该流程根据内冷屏的参数化模型的几何参数驱动优化流程得到满足设计判据的优化设计参数。在应用示例中，考虑到等离子体破裂工况下冷屏的安全运行要求，在电磁-结构分析得到的应力满足设计判据的前提下，通过优化几何参数使内冷屏的质量最小，从而降低建造成本、提高经济性。

关键词: 中国聚变工程实验堆, 内冷屏, 参数化, 电磁-结构分析

Abstract:

In the integrated design framework provided in the CFETR integration design platform (CIDP), a workflow that can efficiently optimize the design of the vacuum vessel thermal shield (VVTS) was developed based on the parametric model. In the workflow, according to the geometry parameters of the parametric model of the VVTS, automatic modeling and finite element analysis in CAD/CAE software like CATIA and ANSYS can be driven by OPTIMUS software. The response surface model and sensitivity analysis are then used to determine the parameters which are closely related to the objective optimization. The optimized design parameters of the VVTS, which satisfy the design criterion, can be obtained by further optimization workflow. The application of the workflow is demonstrated by an example, where the safety requirement during plasma disruption events is considered. While the stress obtained by electromagnetic- structural analysis can meet the design criteria, the mass of the VVTS is minimized to reduce the construction cost and improve economics.

Key words: China fusion engineering test reactor, Thermal shield, Parametric model, Electromagneticstructural analysis

中图分类号:

TL62+2

朱紫阳1，叶民友1，毛世峰*1，刘旭峰2. 基于参数化模型的内冷屏设计优化流程的开发[J]. 核聚变与等离子体物理, 2019, 39(3): 256-264.

ZHU Zi-yang1, YE Min-you1, MAO Shi-feng1, LIU Xu-feng2. Development of the optimization design workflow for thermal shield based on parametric model[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(3): 256-264.

参考文献

[1] Yuanxi Wan, Jiangang Li, Yong Liu, et al. Overview of the present progress and activities on the CFETR[J]. Nucl.Fusion, 2017, 57(10): 102009.
[2] Yuntao Song, Song Tao Wu, Jiangang Li, et al. Concept design of CFETR tokamak machine[J]. IEEE Transactions on Plasma Science, 2014, 42(3): 503−509.
[3] Minyou Ye, Zhongwei Wang, Shifeng Mao, et al.Integration design platform of the CFETR[J]. Fusion Eng. Des., 2017, 123: 87−90.
[4] Kun Xu, Minyou Ye, Yuntao Song, et al. Parameter study on helium cooled ceramic breeder blanket neutronics with CFETR integration design platform[J].Fusion Eng. Des., 2017, 124: 757−761.
[5] Jianwu Zhang, Minyou Ye, Xuebing Peng, et al.Preliminary design and verification of divertor module of CFETR system code[J]. IEEE Transactions on Plasma Science, 2016, 44(9): 1763−1767.
[6] Chen Zhu, Minyou Ye, Xufeng Liu, et al. Development of vacuum vessel design and analysis module for CFETR integration design platform[J]. Science and Technology of Nuclear Installations, 2016, 2016:5321057.
[7] Noesis Solution N V. Optimus Rev. 10.13 theory manual[M]. Leuven Belgium: Noesis Solutions, 2012.
[8] McKay M D, Beckman R J, Conover W J. A Comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. American Statistical Association, 1979, 21(2):239−245.
[9] 马永杰, 云文霞. 遗传算法研究进展[J]. 计算机应用研究, 2012, 29(04): 1201−1206.
[10] Saltelli A. Sensitivity analysis for importance assessment[J]. Risk Analysis, 2002, 22(3): 579−590.
[11] Saltelli A. Introduction to sensitivity analysis[J]. Global Sensitivity Analysis, 2008, 1(3): 1−51.
[12] Liu Xufeng, Zheng Jinxing, Luo Zhenping, et al.Conceptual design and analysis of CFETR magnets [C].Proceedings of the 25th Symposium on Fusion Engineering (SOFE), San Francisco, June 10−14, 2013.
[13] ASME Boiler and Pressure Vessel Code Section III [S].New York: American Society of Mechanical Engineers,2007.

[1]	龚正, 韩松博, 倪小军, 葛剑, 黄建军, 于斌, 高翔, 孙金鑫, . CFETR 真空室结构稳定性的有限元分析[J]. 核聚变与等离子体物理, 2023, 43(1): 38-42.
[2]	钟云珂, 陈鑫, 朱根良, 杨恩朋, 付猷昆, 蔡立君, 李强 . CFETR 25kW 4.5K 氦制冷机 RAMI 初步分析[J]. 核聚变与等离子体物理, 2023, 43(1): 55-61.
[3]	侯炳林, 赖小强, 许婉韵, 魏海鸿. CFETR 磁体支撑初步概念设计 [J]. 核聚变与等离子体物理, 2022, 42(4): 399-403.
[4]	孙金鑫, 倪小军, 葛剑, 韩松博, 龚正. 等离子体大破裂工况下CFETR真空室的电磁结构耦合分析[J]. 核聚变与等离子体物理, 2022, 42(3): 308-313.
[5]	陆野, 杨锦宏, 桂腾, 任珍珍, 刘胜, 宁洪伟, 徐敬坤, 宋强, 邓海飞, 汪卫华. CFETR电流爬升阶段中性束注入伏秒数分析[J]. 核聚变与等离子体物理, 2022, 42(3): 354-360.
[6]	赵自强, 栗再新, 曹启祥. CFETR氦冷包层放射性废物包装容器的屏蔽设计[J]. 核聚变与等离子体物理, 2022, 42(2): 175-181.
[7]	魏辉翔, 李仁杰, 李成, 徐壮, 王文善. CFETR极向场磁体馈线系统线圈终端盒初步设计与分析[J]. 核聚变与等离子体物理, 2022, 42(1): 51-55.
[8]	杨宇晴1，秦成明*2，赵燕平2，杨桦2. CFETR螺旋波行波天线的仿真设计与分析[J]. 核聚变与等离子体物理, 2021, 41(2): 138-142.
[9]	王开松, 杨皓, 徐坤 . CFETR 水冷包层电磁结构耦合分析[J]. 核聚变与等离子体物理, 2021, 41(1): 45-50.
[10]	俞志伟1, 2，陆坤1，葛剑1，倪小军1. 不同位形大破裂工况下CFETR 真空室预研件的电磁载荷分析 [J]. 核聚变与等离子体物理, 2020, 40(3): 227-232.
[11]	胡俊，喻彬，姜飞，邓立，张志*. 中国聚变工程实验堆涉氚阀门技术现状[J]. 核聚变与等离子体物理, 2020, 40(2): 182-187.
[12]	王俊，王晓宇. 中国聚变工程实验堆启动氚投料量与氚平衡分析[J]. 核聚变与等离子体物理, 2020, 40(1): 34-39.
[13]	殷宁，谭慧俊，梁钢，黄河峡，孙姝. 等离子体激励器的静特性与高速特性仿真研究[J]. 核聚变与等离子体物理, 2020, 40(1): 90-96.
[14]	张兵1, 2，赵雪丽1, 2，马学斌3, 4，刘松林1. 水冷陶瓷增殖剂包层氚输运分析[J]. 核聚变与等离子体物理, 2019, 39(4): 301-308.
[15]	王小勇，张鸿翔，叶兴福. 中国固态增殖剂试验包层系统的氦气冷却系统仿真计算[J]. 核聚变与等离子体物理, 2018, 2(4): 412-419.

基于参数化模型的内冷屏设计优化流程的开发

Development of the optimization design workflow for thermal shield based on parametric model

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics