欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2022, Vol. 42 ›› Issue (3): 308-313.DOI: 10.16568/j.0254-6086.202203007

• 核聚变工程 • 上一篇    下一篇

等离子体大破裂工况下CFETR真空室的电磁结构耦合分析

孙金鑫1, 2,倪小军*1,葛  剑1,韩松博1,龚  正3, 4   

  1. (1. 中国科学院等离子体物理研究所,合肥 230031;2. 中国科学技术大学,合肥 230027;3. 深圳大学新能源研究中心, 深圳 518060; 4. 深圳大学光电工程学院, 光电子器件与系统(教育部/广东省)重点实验室, 深圳 518060)

  • 收稿日期:2020-09-07 修回日期:2021-12-13 出版日期:2022-09-15 发布日期:2022-09-21
  • 通讯作者: 倪小军(1982-),男,安徽无为人,副研究员,博士,从事托卡马克装置的电磁、结构、流体及多物理场耦合力学计算研究。
  • 作者简介:孙金鑫(1994-),男,安徽黄山人,博士研究生,从事托卡马克装置的电磁、结构与多物理场计算。
  • 基金资助:
    国家重点研发计划(2017YFE0300503)

Electromagnetic structure coupling analysis of CFETR vacuum vessel under major disruption event

SUN Jin-xin1, 2, NI Xiao-jun1, GE Jian1, HAN Song-bo1, GONG Zheng3, 4   

  1. (1. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031; 2. University of Science and Technology of China, Hefei 230027; 3. Advanced Energy Research Center, Shenzhen University, Shenzhen 518060; 4. Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060)

  • Received:2020-09-07 Revised:2021-12-13 Online:2022-09-15 Published:2022-09-21

摘要:

针对22.5°真空室扇形模型,建立CFETR真空室在等离子体大破裂工况下的有限元分析模型。通过仿真计算得到真空室在等离子体破裂工况下的涡流分布、电磁力分布,并将电磁载荷导入结构场,分析真空室不同PS段的应力、形变等结果。计算得到最大薄膜弯曲应力位于PS1段,约53.9MPa,远小于许用应力值。结果表明,真空室设计满足等离子体破裂工况下的结构强度要求。

关键词: 中国聚变工程实验堆, 真空室, 电磁载荷, 大破裂

Abstract:

In this paper, based on the model of the 22.5° vacuum vessel, a finite element analysis model of the CFETR vacuum vessel under the condition of plasma major disruption is established. Through simulation calculation, the eddy current and electromagnetic force distribution of the vacuum vessel under major disruption working conditions are obtained,and the electromagnetic load is introduced into the structure field. The stress and deformation of the different PS sections of the vacuum vessel are analyzed. The calculated maximum film bending stress is in the first section, about 53.9MPa, which is far less than the allowable stress value. The results show that the design of the vacuum vessel meets the structural strength requirements under plasma major disruption conditions.

Key words: China Fusion Engineering Test Reactor, Vacuum vessel, Electromagnetic load, Major disruption

中图分类号: