ITER假负载的设计与分析

核聚变与等离子体物理 ›› 2014, Vol. 34 ›› Issue (2): 159-164.

ITER假负载的设计与分析

秦秀颀1，徐宁1，宋执权2，陈湘波1，李传3

(1. 合肥工业大学电气与自动化工程学院，合肥 230009 ； 2. 中国科学院等离子体物理研究所，合肥 230031； 3. 华中科技大学电气与电子工程学院，武汉 430074)

收稿日期:2013-06-13 修回日期:2013-12-06 出版日期:2014-06-15 发布日期:2014-06-16
作者简介:秦秀颀(1990-)，男，安徽合肥人，硕士研究生，电力电子与电力传动专业。
基金资助:
ITER计划极向场变流器电源系统设计及国内集成(科技部国际项目)

Design and analysis of ITER dummy load

QIN Xiu-qi1, XU Ning1, SONG Zhi-quan2, CHEN Xiang-bo1, LI Chuan3

(1. School of Electric and Automatic Engineering, Hefei University of Technology, Hefei 230009; 2. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031; 3. College of Electric & Electronic Engineering, Huazhong University of Science and Technology,Wuhan 430074)

Received:2013-06-13 Revised:2013-12-06 Online:2014-06-15 Published:2014-06-16

摘要/Abstract

摘要：

采用多层线圈并联，每层多匝的结构设计出ITER假负载。通过ANSYS建立该线圈的结构模型，对额定电流7.75kA连续运行和68kA脉冲电流运行两种模式下进行了动力学稳定性和热稳定性分析。分析结果验证了该线圈结构的假负载的设计合理性，为其进一步的优化设计奠定了基础。

关键词: ITER假负载, 电抗器, 热稳定性, 动力学稳定性, 脉冲电流运行模式

Abstract:

The ITER dummy load is designed as multilayer multiturn structure. Setting up coil’s structure model by using ANSYS, the dynamic stability analysis and thermal stability analysis are conducted under rated current mode 7.75kA as well as pulsed current mode 68kA. The analysis results can verify the reasonability of dummy load with this structure and lay the foundation for the further optimization.

Key words: ITER dummy load, Reactor, Thermal stability, Dynamic stability, Pulsed current mode

中图分类号:

TM478

秦秀颀1，徐宁1，宋执权2，陈湘波1，李传3. ITER假负载的设计与分析[J]. 核聚变与等离子体物理, 2014, 34(2): 159-164.

QIN Xiu-qi1, XU Ning1, SONG Zhi-quan2, CHEN Xiang-bo1, LI Chuan3. Design and analysis of ITER dummy load[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(2): 159-164.