HL-2M环向场线圈电磁场和受力的计算分析

doi:10.16568/j.0254-6086.201703001

核聚变与等离子体物理 ›› 2017, Vol. 37 ›› Issue (3): 249-256.DOI: 10.16568/j.0254-6086.201703001

• 等离子体物理学 • 下一篇

HL-2M环向场线圈电磁场和受力的计算分析

袁保山，龙永兴，邱银，李广生，刘健，邹辉，单亚农

(核工业西南物理研究院，成都 610041)

收稿日期:2017-03-04 修回日期:2017-07-03 出版日期:2017-09-15 发布日期:2017-09-14
作者简介:袁保山(1940-)，男，吉林省东丰县人，研究员，主要从事托卡马克工程研究。

Electromagnetic calculation and load analysis of the HL-2M TF coils

YUAN Bao-shan, LONG Yong-xing, QIUYin, LI Guang-sheng,LIU Jian, ZHOU Hui, SHAN Ya-nong

(核工业西南物理研究院，成都 610041)

Received:2017-03-04 Revised:2017-07-03 Online:2017-09-15 Published:2017-09-14

摘要/Abstract

摘要：

在建的HL-2M装置的环向场线圈采用了比特板式结构，介绍了采用封闭多边形电流丝模型计算分析HL-2M装置环向场线圈电磁场和纹波情况；环向场线圈电流与环向场引起的电磁力以及与极向场产生的倾覆力也做了计算。计算结果对环向场线圈的设计具有一定的参考意义。

关键词: HL-2M装置, 环向场线圈, 电磁力, 倾覆力

Abstract:

Bitter plate structure was adopted for the toroidal field (TF) coils of the building HL-2M tokamak. The electromagnetic field and its ripple of TF coils were calculated by the closed polygon filament current model, the electromagnetic force caused by the TF coil current and the overturning moment produced by TF coil currents and PF were also computed. The results have definite reference significance for the design of the TF coils.

Key words: HL-2M tokamak, TF coils, Electromagnetic force, Overturning force

中图分类号:

TL62+2

袁保山，龙永兴，邱银，李广生，刘健，邹辉，单亚农. HL-2M环向场线圈电磁场和受力的计算分析[J]. 核聚变与等离子体物理, 2017, 37(3): 249-256.

YUAN Bao-shan, LONG Yong-xin, QIU Yin, LI Guang-sheng, LIU Jian, ZHOU Hui, SHAN Ya-nong. Electromagnetic calculation and load analysis of the HL-2M TF coils[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(3): 249-256.

参考文献

[1] Huguet M, Booth J A, Pohlchen R. The design and manufacture of the Joint European Torus toroidal field coils[C]. International Conference on Magnet Technology (MT-6), Bratislava, Czechoslovakia, 1977. 106-111.

[2] Smith G E, Punchard W F B. TFTR toroidal field coil design[C]. Proceedings 7th Symposium on Engineering Problems of Fusion Research, Knoxville, Tenn., October 25-28, 1977. 15-19.

[3] Broser E, Keilhacker M, Kornherr M, et al. Design and manufacture of the ASDEX toroidal field coils[C]. 9th Symposium on Fusion Technology, Garmisch- Partenkirrchen, 14-18 June 1976. 205.

[4] Khvostenko P P, Azizov E A, Alfimov D E, et al. The magnet system of the tokamak T-15 upgrade[J]. Fusion Engineering and Design, 2015, 98-99: 1090-1093.

[5] Reis E E, SweisR A, Trester P W. Determination of a permissible size flaw in the DOUBLET III toroidal field coil[C]. Proceedings 8th Symposium on Engineering Problems of Fusion Research, San Francisco, Calif., November 13-16, 1979. 98-102.

[6] DeBlois R L, McFarlin D J, Gagnon E P, et al. TEXT TF coil fabrication[C]. Proceedings 8th Symposium on Engineering Problems of Fusion Research, San Francisco, Calif., 1979. 166-170.

[7] Pizzuto A, Annino C, Baldarelli M, et al. Chapter 9: the FTU machine-design construction and assembly[J]. Fusion Science and Technology, 2004, 45(3): 1536.

[8] Weggel C, Hamburger W, Montgomery B, et al. The Alcator C magnetic coil systems[C]. 7th Symposium on Engineering Problems of Fusion Research, Knoxville, Tenn., 1977. 54-58.

[9] 邹晖, 李广生, 蔡立君, 等. HL-2M环向场线圈的结构设计[J]. 核聚变与等离子体物理, 2016, 36(2): 136.

[10] 蔡立君, 邹晖, 刘健, 等. HL-2M环向场线圈匝间剪切应力分析[J]. 核聚变与等离子体物理, 2013, 33(2): 135-141.

[11] Reis E E, SweisR A, Trester P W. Determination of a permissible size flaw in the DOUBLET III toroidal field coil [C]. Proceedings 8th Symposium on Engineering Problems of Fusion Research, San Francisco, Calif., November 13-16, 1979. 98-102.

[12] Broser E , Keilhacker M, Kornherr M, et al. The toroidal magnetic field coils for the ASDEX tokamak[C]. 5^th International Confer. on Magnet Technology, 1975. 332.

[13] Choi C H, Lee D K, Sa J W, et al. Electromagnetic loads on the KSTAR magnet system[J]. IEEE Transactions on Applied Superconductivity, 2002, 12(1): 534-537.

[14] Tsuchiya K, Suzuki Y, Kizu K, et al. Mechanical design of JT-60SA magnet system[J]. IEEE Transactions on Applied Superconductivity, 2008, 18(2): 208-211.

[15] LEE D K. Magnetic field, vector potential and their derivatives due to currents in closed polygons of wire[J]. Computer Physics Communications, 1982, 25: 181.

[16] 龙永兴, 牟宗泽, 简广德, 等. HL-2M装置环向场线圈的磁场和波纹度计算[R]. 核工业西南物理研究院年报, 2006. 60.

[17] Ulby F T. 应用电磁学基础(第四版)[M]. 北京: 人民邮电出版社, 2007. 179.

[18] 袁保山, 姜绍风, 陆志鸿. 托卡马克装置工程基础[M]. 北京: 原子能出版社, 2011. 98.

[19] 李佳鲜, 陈谦, 张锦华, 等. HL-2M 装置基本位形初步设计[J]. 核聚变与等离子体物理, 2013, 33(4): 324.

HL-2M环向场线圈电磁场和受力的计算分析

Electromagnetic calculation and load analysis of the HL-2M TF coils

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	邹春龙, 刘旭峰, 杜双松. 循环力载荷下CICC超导接头临界电流退化的分析[J]. 核工业西南物理研究院, 2025, 45(1): 45-48.
[2]	许峻铭, 刘海峰. CFQS仿星器线圈中电磁力的优化研究[J]. 核工业西南物理研究院, 2025, 45(1): 91-97.
[3]	王佳琪, 蒙建鹏, 贾瑞宝, 刘晓龙, 李强, 陈鑫, 颉延风. HL-3 装置环向场线圈热工分析[J]. 核工业西南物理研究院, 2024, 44(4): 401-408.
[4]	王富甲, 陈德鸿, 徐国盛, 吴佳戎, 万宝年. 强磁场托卡马克环向场线圈应力缓解研究[J]. 核工业西南物理研究院, 2024, 44(1): 1-6.
[5]	乔涛, 刘德权, 林涛, 郑小舟, 许文峰. HL-2M支撑部件焊接中的磁导率控制工艺研究[J]. 核聚变与等离子体物理, 2022, 42(3): 285-289.
[6]	高金明, 卢杰, 邓玮, 董云波, 刘仪. HL-2M装置光电探测器冷却结构部件的热应力分析和设计[J]. 核聚变与等离子体物理, 2022, 42(3): 290-294.
[7]	武小强, 冉红, 张党申, 荣华, 宋斌斌, 侯吉来. HL-2M装置真空室成环工艺技术[J]. 核聚变与等离子体物理, 2022, 42(3): 327-330.
[8]	刘晓龙, 李广生, 邹晖, 邱银, 单亚农, 蔡立君, 刘健, HL-M 研制团队. HL-2M 装置环向场线圈的工程研制与调试[J]. 核聚变与等离子体物理, 2021, 41(s1): 312-315.
[9]	张龙, 袁应龙, 蔡立君, 刘健, 卢勇, 刘雨祥, 刘宽程, 李云峰, HL-M 团队 . HL-2M 极向场线圈支撑结构分析评估[J]. 核聚变与等离子体物理, 2021, 41(s1): 402-408.
[10]	林涛, 刘德权, 蔡立君, 李强, 乔涛. HL-2M 环向场线圈预紧系统设计[J]. 核聚变与等离子体物理, 2021, 41(s1): 415-419.
[11]	俞志伟1, 2，陆坤1，葛剑1，倪小军1. 不同位形大破裂工况下CFETR 真空室预研件的电磁载荷分析 [J]. 核聚变与等离子体物理, 2020, 40(3): 227-232.
[12]	黄运聪，蔡立君，袁应龙，卢勇，刘健，刘雨祥，郑国尧. HL-2M上偏滤器结构初步设计及关键制造工艺预研[J]. 核聚变与等离子体物理, 2020, 40(3): 233-240.
[13]	薛淼，郑国尧，薛雷，李佳鲜，黄文玉，谢金雨，简翔，陈佳乐. HL-2M混合运行方案初步分析[J]. 核聚变与等离子体物理, 2020, 40(1): 16-22.
[14]	张旺1, 2，袁应龙2，姚列明1，沈俊田1, 2，陈雅静1，吴静*1. HL-2M偏滤器结构动力学分析[J]. 核聚变与等离子体物理, 2020, 40(1): 40-44.
[15]	周建，任磊磊，宋显明，郑国尧，张锦华，罗萃文，李佳鲜，李波. HL-2M装置等离子体放电反馈控制系统[J]. 核聚变与等离子体物理, 2020, 40(1): 52-58.