熔盐包层设计与氚增殖比的计算

doi:10.16568/j.0254-6086.201701018

核聚变与等离子体物理 ›› 2017, Vol. 37 ›› Issue (1): 99-104.DOI: 10.16568/j.0254-6086.201701018

熔盐包层设计与氚增殖比的计算

尹苗1，宋云涛2，雷明准2，徐坤1

(1. 中国科学技术大学，合肥 230026；2. 中国科学院等离子体物理研究所，合肥 230031)

收稿日期:2015-12-23 修回日期:2016-07-26 出版日期:2017-03-15 发布日期:2017-03-15
作者简介:尹苗(1990-)，男，湖南衡阳人，硕士，从事聚变中子物理研究。

Design of the molten salt blanket and the calculation of tritium breeding ratio

YIN Miao1, SONG Yun-tao2, LEI Ming-zhun2, XU Kun1

(1. University of Science and Technology of China, Hefei 230026; 2. Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031)

Received:2015-12-23 Revised:2016-07-26 Online:2017-03-15 Published:2017-03-15

摘要/Abstract

摘要：

通过对聚变堆设计包层进行先后的一维、三维氚增殖比计算与分析，确定合适的模块材料、明确的模块划分以及相应的模块厚度，最终找到了合适的满足氚自持(TBR=1.3162)的熔盐设计包层。

关键词: 包层, 熔盐, 氚增殖比, 计算分析

Abstract:

To confirm the appropriate material, certain division and the corresponding thickness of model for the blanket design of fusion reactor, the tritium breeding ratio calculation and analysis in one-dimensional and three-dimensional model are presented. An appropriate molten salt design blanket that contents the tritium self-sustaining (TBR=1.3162) is found.

Key words: Blanket, Molten salt, Tritium breeding ratio, Calculation and analysis

中图分类号:

TL61+3

尹苗1，宋云涛2，雷明准2，徐坤1. 熔盐包层设计与氚增殖比的计算[J]. 核聚变与等离子体物理, 2017, 37(1): 99-104.

YIN Miao1, SONG Yun-tao2, LEI Ming-zhun2, XU Kun1. Design of the molten salt blanket and the calculation of tritium breeding ratio[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(1): 99-104.

参考文献

[1] Cheng E T, Merril B J, Sze D K. Nuclear aspects of molten salt blankets [J]. Fusion Engineering and Design, 2003, 69(1): 205-213.

[2] Youssef M Z, Sawan M E, Sze D K. The breeding potential of ‘flinabe’ and comparison to ‘flibe’ in ‘CLiFF’ high power density concept [J]. Fusion Engineering and Design, 2002, 61: 497-503.

[3] Wong C P C, Malang S, Sawan M, et al. Molten salt self-cooled solid first wall and blanket solid first wall and blanket design on advanced ferritic steel [J]. Fusion Engineering and Design, 2004, 72(1): 245-275.

[4] Sagara A, Yamanishi H, Imagawa S, et al. Design and development of the Flibe blanket for helical-type fusion reactor FFHR [J]. Fusion Engineering and Design, 2000, 49: 661-666.

[5] Cadwallader L C, Longhurst G R. Flibe use in fusion reactors: an initial safety assessment [R]. Idaho National Engineering and Environmental Laboratory, INEEL/EXT- 99-00331, 1999.

[6] Zhao J, Yang Y, Zhou Z. Study of thorium–uranium based molten salt blanket in a fusion-fission hybrid reactor [J]. Fusion Engineering and Design, 2012, 87(7): 1385-1389.

[7] Yamanishi H, Sagara A, Motojima O, et al. Design studies on nuclear properties on the Flibe blanket for helical-type fusion reactor FFHR [J]. Fusion Engineering and Design, 1998, 41(1): 583-588.

[8] Liu S, Li J, Zheng S, et al. Neutronics analysis of inboardshielding capability for a DEMO fusion reactor CFETR [J]. Fusion Engineering and Design, 2013, 88(9): 2404-2407.

[9] Ihli T, Basu T K, Giancarli L M, et al. Review of blanket designs for advanced fusion reactors [J]. Fusion Engineering and Design, 2008, 83(7): 912-919.

[10] Sawan M E, Youssef M Z. Three-dimensional neutronics assessment of dual coolant molten salt blankets with comparison to one-dimensional results [J]. Fusion Engineering and Design, 2006, 81(1): 505-511.

[11] Sze D K, Jung J, Cheng E T, et al. Conceptual design of a self-cooled Flibe blanket [J]. Fusion Science and Technology, 1986, 10(3P2A): 624-632.

[12] Sarer B, Günay M, Korkmaz M E, et al. Three- dimensional neutronic calculations for the fusion breeder Apex reactor [J]. Fusion Science and Technology, 2007, 52(1): 107-115.

[13] Chen H, Li M, Lv Z, et al. Conceptual design and analysis of the helium cooled solid breeder blanket for CFETR [J]. Fusion Engineering and Design, 2015, 96: 89-94.

[1]	王开松, 刘明宗, 汪键. 氦冷固态包层氚增殖球床气体和粉末流动特性的数值研究[J]. 核工业西南物理研究院, 2024, 44(2): 163-169.
[2]	余毅, 马学斌, 蒋科成, 伍秋染, 陈磊, 刘松林 . CFETR 超临界 CO₂锂铅双冷包层第一壁热工水力学分析[J]. 核工业西南物理研究院, 2023, 43(4): 386-391.
[3]	许婉韵, 王才旺, 罗蓉蓉, 黄超, 李鹏远, 许发勇, 邓华林, 陈辉. CFETR 产氚包层与偏滤器部件在热室内维修与退役流程的概念设计[J]. 核聚变与等离子体物理, 2022, 42(4): 378-382.
[4]	王文嘉, 成晓曼, 马学斌, 刘松林. CFETR 水冷包层模块真空室内破口事故安全分析[J]. 核聚变与等离子体物理, 2022, 42(4): 433-439.
[5]	罗蓉蓉, 潘传杰, 王才旺, 李鹏远, 王晓宇, 邓华林, 闫腾飞, 许发勇, 许婉韵. CFETR包层在热室内的除氚流程初步设计[J]. 核聚变与等离子体物理, 2022, 42(3): 279-284.
[6]	王开松, 杨皓, 汪键, 雷明准. 基于离散元方法的氦冷陶瓷增殖包层球床压缩性能研究[J]. 核聚变与等离子体物理, 2022, 42(3): 295-300.
[7]	凌启鑫, 马学斌, 刘松林. CFETR水冷包层模块热工水力学分析与优化[J]. 核聚变与等离子体物理, 2022, 42(3): 301-307.
[8]	陈畅, 蒋科成, 王万景, 刘松林. 水冷陶瓷包层第一壁制造偏差对传热与热应力的影响分析[J]. 核聚变与等离子体物理, 2022, 42(3): 314-321.
[9]	王俊, 李茹烟, 王晓宇, 张龙, 武兴华. CFETR 氦冷固态增殖包层多物理场氚输运分析 [J]. 核聚变与等离子体物理, 2021, 41(4): 617-622.
[10]	屈伸，曹启祥，段旭如，王学人，王晓宇. 均匀化模型对CFETR氦冷包层中子学影响研究[J]. 核聚变与等离子体物理, 2021, 41(2): 118-123.
[11]	王聪1, 2，陈磊*1，刘松林1. 包层氚增殖球床不同装载方案的有效热导率研究[J]. 核聚变与等离子体物理, 2021, 41(2): 131-137.
[12]	王磊, 张秀杰, 潘传杰, 许增裕, 赵耀, 王凡. 聚变堆液态包层准二维磁流体湍流模型研究[J]. 核聚变与等离子体物理, 2021, 41(1): 21-25.
[13]	王开松, 杨皓, 徐坤 . CFETR 水冷包层电磁结构耦合分析[J]. 核聚变与等离子体物理, 2021, 41(1): 45-50.
[14]	李夏1, 2，马学斌3，卢棚3，郑俞1, 2，徐坤1，刘松林*1. CFETR水冷陶瓷增殖剂包层中子学分析[J]. 核聚变与等离子体物理, 2020, 40(3): 275-282.
[15]	高庆然1, 2，王纪超1, 3，王万景*1，王兴立1, 2，耿祥1，陈镇1, 2，李强1 ，谢春意1, 2，罗广南1, 2. 中国聚变工程实验堆水冷包层钢构件流道成形控制研究[J]. 核聚变与等离子体物理, 2020, 40(2): 155-161.

熔盐包层设计与氚增殖比的计算

Design of the molten salt blanket and the calculation of tritium breeding ratio

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics