Research on flow-induced-vibration of the cooling system in HL-2M divertor

doi:10.16568/j.0254-6086.201904005

Abstract

Abstract:

Based on ANSYS/CFX fluid-solid coupling method, the flow-induced vibrations of the HL-2M divertor cooling system under different flow rates and different metal hoses were evaluated. The results show that the equivalent elastic modulus of the metal hose is the main factor affecting the vibration response of the system. The influence is negligible if the average flow velocity of the fluid is controlled in 2~10m·s^-1. The maximum occurrence probability of the main deformation area appears in the vicinity of U-tube and the metal hose. A metal hose with an equivalent elastic modulus of E≥1010Pa should be chosen, and a strengthened support is suggested to be added nearby the U-tube and the metal-hose to ensure safety.

Key words: HL-2M tokamak, Divertor, Flow-induced-vibration

摘要：

基于ANSYS/CFX软件，用双向流-固耦合方法评估不同流速和不同金属软管下HL-2M偏滤器冷却回路的流致振动效应。评估表明：金属软管的等效弹性模量是影响管路振动响应的主要参数，当流体平均流速控制在2~10m·s^-1时，响应较小。管路主要变形区域最大发生概率出现在U型管和金属软管处。因此，尽可能选择等效弹性模量E≥1010Pa的金属软管，建议在U型管和软管区域增加防振加固支撑设计以确保安全。

关键词: HL-2M装置, 偏滤器, 流致振动

CLC Number:

TL62+1

ZHANG Long, LU Yong, CAI Li-jun, LIU Yu-xiang,YUAN Ying-long, LIU Jian, LAI Chun-lin. Research on flow-induced-vibration of the cooling system in HL-2M divertor[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(4): 317-323.

张龙，卢勇，蔡立君*，刘雨祥，袁应龙，刘健，赖春林. HL-2M偏滤器冷却回路流致振动研究[J]. 核聚变与等离子体物理, 2019, 39(4): 317-323.

References

[1] Katramados I, Fishpool G, Fursdon M, et al. MAST upgrade closed pumped divertor design and analysis [J].Fusion Eng. Des., 2011, 86(9–11): 1595−1598.
[2] Zheng G Y, Xu X Q, Ryutov D D, et al. Advanced divertor concept design and analysis for HL-2M [J].Fusion Eng. Des., 2016, 112: 450−459.
[3] Cai L, Liu Y, Lu Y, et al. Progress of engineering design and analysis of HL-2M advanced divertor [J]. Fusion Eng.Des., 2017, 124: 262−266.
[4] Pittard M T, Blotter J D. Numerical modeling of LES based turbulent flow induced vibration [C]. ASME 2003 International Mechanical Engineering Congress and Exposition, 2003: 141−148.
[5] Mori Y, Tokuda S. The effect of oscillation on instantaneous local heat transfer in forced convection from a cylinder [C]. Proc. 3rd Int. Heat Transfer Conference, 1996, 3: 49−56.
[6] Richardson D. Effect of sound and vibration on heat transfer [J]. Applied Mechanics Reviews, 1967, 20:201−217.
[7] 席志德, 陈炳德, 李朋洲, 等. 流致振动研究概述 [C].全国反应堆结构力学会议, 2006.
[8] Pettigrew M J, Taylor C E, Fisher N J, et al.Flow-induced vibration: recent findings and open questions [J]. Nuclear Engineering and Design, 1998,185(2–3): 249−276.
[9] Ghayesh M H. Parametric vibrations and stability of an axially accelerating string guided by a non-linear elastic foundation [J]. International Journal of Non-Linear Mechanics, 2010, 45(4): 382−394.
[10] Ghazali M H, Hee L M, Leong M S. Piping vibration due to pressure pulsations: review [J]. Advanced Materials Research, 2014, 845: 350−354.
[11] 刘桂祥, 张鲲, 林松. 基于CFD 和结构有限元双向耦合方法的载流管路流致振动特性研究 [J]. 核动力工程, 2016, (s2): 24−27.
[12] 祝效华, 曾云义, 陈波, 等. 考虑流固耦合的双弯头压裂管汇的振动特性 [J]. 天然气工业, 2018, (1):95−101.
[13] 杨凡. 基于有限元方法的流致振动数值模拟 [J]. 四川建筑, 2017, 37(2): 205−208.
[14] Hofstede E T, Kottapalli S, Shams A. Numerical prediction of flow induced vibrations in nuclear reactor applications [J]. Nucl. Eng. Des., 2017, 319: 81−90.
[15] 李少静, 雷步芳, 李永堂. 流固耦合作用下管道振动模态分析 [J]. 锻压装备与制造技术, 2012, 47(4):76−78.