|
[1] 项志遴, 俞昌旋. 高温等离子体诊断技术 [M]. 上海: 上海科学技术出版社, 1982.
[2] Zhong W L, Zou X L, Feng B B, et al. Impact of
impurity mixture gas seeded by supersonic molecular beam injection on
edge-localized modes in the HL-2A tokamak [J]. 2019, 59(7): 076033.
[3] 洪文玉, 严龙文, 程钧, 等. HL-2A装置送气和加料的脱靶特性 [J]. 核聚变与等离子体物理, 2008, 28(4): 298.
[4] Jackson G L, Murakami M, Baker D R, et al.
Comparison of L-mode regimes with enhanced confinement by impurity seeding in
JET and DⅢ-D [J]. 2002, 44: 1893−1902.
[5] 李雪泓, 李伟, 刘仪. HL-2A等离子体的热辐射测量 [J]. 核聚变与等离子体物理, 2009, 29(1): 10−15.
[6] Duan Y M, Hu L Q, Mao S T, et al. The resistive
bolometer for radiated power measurement on EAST [J]. Rev. Sci. Instrum., 2012,
(83): 093501.
[7] Bernert M, Eich T, Burckhart A, et al.
Application of AXUV diode detectors at ASDEX Upgrade [J]. Rev. Sci. Instrum.,
2014, (85): 033503.
[8] Ingesson L C, Alper B, Peterson B J, et al.
Tomography diagnostics: bolometer and soft-X-ray detection [J]. Fusion Science
and Technology, 2007, 53: 528.
[9] Gray D S, Luckhardt S C, Chousal L, et al. Time
resolved radiated power during tokamak disruptions and spectral averaging of
AXUV photodiode response in DⅢ-D [J]. Rev. Sci. Instrum., 2004: 75(2): 376.
[10] Kim J, Choe W. Preliminary design of the soft
X-ray array tomographic diagnostic system for Korea Superconducting Tokamak
Advanced Research (KSTAR) plasmas [J]. Rev. Sci. Instrum., 2004, 75(10): 3974.
[11] Gao J M, Dong Y B, J Lu, et al. Preliminary
design of the AXUV bolometer for the HL-2M tokamak [J]. Fusion Eng. Des., 2020,
161: 111904.
[12] Liu D Q, Ran H, Li G S, et al. Engineering
design for HL-2M tokamak components [J]. Fusion Eng. Des., 2013, 88: 679.
[13] Li Q, Li G S, Zou H, et al. Design and
development of magnets for HL-2M tokamak [J]. IEEE Transactions on Applied
Superconductivity, 2016, 26(7): 4205406.
[14] 王建豹, 练友运, 封范, 等. HL-2M偏滤器CFC/ CuCrZr靶板的非晶钎焊工艺研究 [J]. 核聚变与等离子体物理, 2019, 39(4): 331. |
