Study on the inspection of welding deformation in the development of ITER ELM coils

doi:10.16568/j.0254-6086.202102011

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2021, Vol. 41 ›› Issue (2): 162-166.DOI: 10.16568/j.0254-6086.202102011

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Study on the inspection of welding deformation in the development of ITER ELM coils

ZHENG Yuan-yang, GU Yong-qi, YUAN Zhong, LIU Chen, WANG Jun, JIN Jing, HAN Hou-xiang

(Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)

Received:2019-12-30 Revised:2020-09-17 Online:2021-06-15 Published:2021-06-24

ITER边缘局域模线圈研制焊接形变测量研究

郑元阳，顾永奇*，袁忠，刘辰，王俊，金京，韩厚祥

(中国科学院等离子体物理研究所，合肥 230031)

作者简介:郑元阳(1989-)，男，安徽萧县人，助理工程师，主要从事大尺寸精密测量技术研究。
基金资助:
国家重点研发计划(2017YFE0300503)

Abstract

Abstract: A method of measuring the welding deformation of coil based on laser scanning and reverse modeling is proposed to measure the welding deformation of ITER ELM coil. The results show that the accuracy is better than 0.1mm, satisfying quantitative detection of welding deformation. During the improvement and evaluation of ITER ELM coil welding process, the measurement of deformation of coil and tooling during welding completed with this method provides reliable quantitative data for welding process evaluation.

Key words: ITER ELM coil, Inspection of welding deformation, Laser scanning, Reverse modeling, Measurement accuracy analysis

摘要： 针对ITER 边缘局域模(ELM)线圈在研制和焊接过程中的焊接形变测量问题，提出了一种基于激光扫描和逆向建模技术的线圈焊接形变量检测方法。实验表明，该方法对曲面的检测精度可以优于0.1mm，有效地解决了焊接过程中的焊接形变定量检测难题。在ITER ELM线圈焊接工艺改进和评定中，用该方法完成了焊接过程中线圈和工装的形变量的测量，为焊接工艺评估提供了可靠的定量数据。

关键词: ITER 边缘局域模线圈；焊接形变检测；激光扫描；逆向建模, 测量精度分析

CLC Number:

TL62+2

ZHENG Yuan-yang, GU Yong-qi, YUAN Zhong, LIU Chen, WANG Jun, JIN Jing, HAN Hou-xiang. Study on the inspection of welding deformation in the development of ITER ELM coils[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 162-166.

郑元阳，顾永奇*，袁忠，刘辰，王俊，金京，韩厚祥. ITER边缘局域模线圈研制焊接形变测量研究[J]. 核聚变与等离子体物理, 2021, 41(2): 162-166.

[1]	ZOU Chun-long, LIU Xu-feng, DU Shuang-song. Analysis of critical current degradation of CICC superconducting joint under cyclic force load [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 45-48.
[2]	CHANG You-you, SUN You-wen, SHENG Hui, YAN Xing-ting, LI Han-hui, XIE Peng-cheng, ZHANG Wen-min, GUO Jin, MAO Shi-feng, LIU Yue-qiang, ZHANG Ling, DUAN Yan-min, LI Ying-ying, ZANG Qing, YE Min-you. Simulation of impurity transport induced by RMP stochastic magnetic field on EAST [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 76-83.
[3]	WANG Jia-qi, MENG Jian-peng, JIA Rui-bao, LIU Xiao-long, LI Qiang, CHEN Xin, XIE Yan-feng. Thermal analysis of toroidal field coils on HL-3 tokamak [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 401-408.
[4]	SONG Qiang, YANG Jin-hong, GUI Teng, CHEN Kai-jie, XI Xu-yao, JIANG Zhong-he, WANG Wei-hua, YANG Qing-zhi. Electromagnetic-structure analysis of the resonant magnetic perturbation coils on J-TEXT [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 436-443.
[5]	WANG Xue-chun, ZOU Gui-qing, YU Qi, SUN Yu-long, ZHANG Yu-xian, ZHAO Zi-qiang, LEI Guang-jiu, ZHENG Guo-yao, GENG Shao-fei. Conceptual design of magnetic deflector shape for deflector neutral beam [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 456-463.
[6]	HE Xiao-xue, CHEN Wen-jin, WEI Yan-ling, LIU Liang, WANG Shi-qin, YU De-liang. The development of charge exchange recombination spectroscopy diagnostic system on the HL-3 tokamak [J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 477-482.
[7]	CHEN Li-xing, CHEN Da-long, SHEN Biao, QIAN Jin-ping, CHEN Ming. Design and frequency response characteristics of the magnetic probe for TT-1 tokamak [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 105-110.
[8]	JIN Huan, WU Yu, SHI Yi, QIN Jing-gang, LIU Chen, DAI Chao, ZHANG Yong-liang, , LIU Hua-jun. CFETR feeder conductor design and thermal stability performance evaluation [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 182-186.
[9]	LIANG Han-yu, SHENG Jie . Optimization of the magnets of a compact high temperature superconducting tokamak based on genetic algorithm [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 120-124.
[10]	SONG Qiang, YANG Jin-hong, LU Ye, GUI Teng, WANG Wei-hua. Discharge simulation and electromagnetic simulation analysis of CFETR snowflake divertor configuration [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 144-151.
[11]	LIANG Jia-he, LIU Song-fen, WANG Hong-peng, DU Yue, WANG Zhan-hui, CHEN Yi-hang, XU Min, XIA Fan, YANG Zong-yu, ZHONG Wu-lü. H mode period recognition in HL-2A tokamak based on convolutional neural network [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 164-169.
[12]	WEI Hui-xiang, LI Ren-jie, LI Cheng, XU Zhuang, WANG Wen-shan. Preliminary design and analysis of coil terminal box of CFETR PF feeder system [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 51-55.
[13]	CAI Li-jun, SONG Bin-bin, LI Lian-cai, XU Hong-bin, YANG Hong, LIN Chen, MAO Wei-cheng, HL-M Development Team . Quality management of HL-2M tokamak assembly and installation [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 289-294.
[14]	ZOU Hui, LI Guang-sheng, QIU Yin, LIU Xiao-long, LIU Jian, SHAN Ya-nong, LI Qiang, HL-M Development Team . Structural design and fabrication of HL-2M poloidal field coils [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 307-311.
[15]	LIU Xiao-long, LI Guang-sheng, ZOU Hui, QIU-Yin, SHAN Ya-nong, CAI Li-jun, LIU Jian, HL-M Development Team. Engineering development and commissioning of HL-2M toroidal field coils [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 312-315.

Study on the inspection of welding deformation in the development of ITER ELM coils

ITER边缘局域模线圈研制焊接形变测量研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics