Research progress of nano-structured oxide dispersion strengthened steels preparation technology and performance for first wall materials

doi:10.16568/j.0254-6086.201801018

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2018, Vol. 2 ›› Issue (1): 110-116.DOI: 10.16568/j.0254-6086.201801018

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Research progress of nano-structured oxide dispersion strengthened steels preparation technology and performance for first wall materials

WU Yu-cheng, WEI Yong, LUO Lai-ma, ZAN Xiang, ZHU Xiao-yong, LUO Guang-nan, CHEN Jun-ling

(1. School of Material Science and Engineering, Hefei University of Technology, Hefei 230009; 2. Laboratories of Nonferrous Metal Material and Processing Engineering of Anhui Province, Hefei 230009; 3. Institute of Plasma Physics, Chinese Academic Sciences, Hefei 230031)

Received:2016-12-10 Revised:2017-10-11 Online:2018-03-15 Published:2018-03-15

第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展

吴玉程1, 2，卫勇1，罗来马1, 2，昝祥1, 2，朱晓勇1, 2，罗广南3，陈俊凌3

(1. 合肥工业大学材料科学与工程学院，合肥 230009； 2. 安徽省有色金属材料与加工工程实验室，合肥 230009； 3. 中国科学院等离子体物理研究所，合肥 230031)

通讯作者: 罗来马(1980-)，男，江西奉新人，博士，副教授，硕士研究生导师，主要从事核材料制备研究。
作者简介:吴玉程(1962-)，男，安徽合肥人，博士，教授，博士研究生导师，主要从事有色金属与纳米元器件研究。
基金资助:
国家磁约束核聚变能发展研究专项(2014GB121001B)；国家自然科学基金(51474083、51574101)；

Abstract

Abstract:

Nano-structured oxide dispersion strengthened (ODS) steel was developed in recent years, and because of its excellent high temperature resistance, irradiation resistance, and mechanical properties, it was expected to be used in the structure of first wall materials in the fusion device. This paper briefly describes the research progress of the preparation technology and performance of nano-structured ODS steels.

Key words: Controlled thermonuclear fusion, First wall structured material, ODS steel

摘要：

近年来发展起来的纳米结构氧化物弥散强化钢(ODS钢)，因其有优异的耐高温、抗辐照及力学性能，满足聚变堆第一壁结构材料的要求。本文主要简述了纳米结构ODS钢制备工艺及其性能的研究进展。

关键词: 受控热核聚变, 第一壁结构材料, 氧化物弥散强化钢

CLC Number:

TL62+7

WU Yu-cheng, WEI Yong, LUO Lai-ma, ZAN Xiang, ZHU Xiao-yong, LUO Guang-nan, CHEN Jun-ling. Research progress of nano-structured oxide dispersion strengthened steels preparation technology and performance for first wall materials[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(1): 110-116.

吴玉程1, 2，卫勇1，罗来马1, 2，昝祥1, 2，朱晓勇1, 2，罗广南3，陈俊凌3. 第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展[J]. 核聚变与等离子体物理, 2018, 2(1): 110-116.

References

[1] Luo L M, Shi J, Lin J S, et al. Microstructure and performane of rare earth element strengthened plasma-facing tungsten material[J]. Scientific Reports, 2016, 6: 32701.

[2] 丁孝禹, 罗来马, 黄丽枚, 等. 湿化学法制备W-TiC 复合粉体及其SPS 烧结行为[J]. 中国有色金属学报, 2014, 24(10): 2594-2600.

[3] Chen H Y, Luo L M, Chen J B, et al. Effect of zirconium element on the mircrostructure and deuterium retention of W-Zr/Sc₂O₃ composite[J]. Scientific Reports, 2016, 6: 32678.

[4] Tan X Y, Luo L M, Chen H Y, et al. Mechanical properties and microstructural change of W-Y₂O₃ alloy under helium irradiation[R]. Scientific Reports, 2015, 5: 12755.

[5] Gao R, Cheng B, Zeng L F, et al. Microstructure hardness and defect of the He irradiated ODS ferritic steel
[J]. Journal of Alloys and Compounds, 2017, 691: 653-658.

[6] Hilger I, Boulnat X, Hoffmannn J, et al. Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering[J]. J. Nucl. Mater., 2016, 472: 206-214.

[7] Klueh R L, Gelles D S, Jitsukawa S, et al. 555Ferritic/ martensitic steels – overview of recent results[J]. J. Nucl. Mater., 2002, 307/311: 455-465.

[8] Kohno Y, Kohyama A, Hirose T, et al. Mechanical property changes of low activation ferritic/martensitic steels after neutron irradiation[J]. J. Nucl. Mater., 1999, 271/272: 145-150.

[9] Klueh R L, Alexander D J, Rieth M. The effect of tantalum on the mechanical properties of a 9Cr-2W- 0.25V-0.07Ta-0.1C steel[J]. J. Nucl. Mater., 1999, 273: 146-154.

[10] 黄群英, 李春京, 李艳芬, 等. 中国低活化马氏体钢CLAM研究进展[J]. 核科学与工程, 2007, 27(1): 41-51.

[11] 付海英, 王平怀, 谌继明. CLF-1低活化铁素体/马氏体钢的热处理工艺[J]. 机械工程材料, 2010, 34(1): 28-37.

[12] Mukhopadhyay D K, Froes F H, Gelles D S. Development of oxide dispersion strengthened ferritic steels for fusion [J]. J. Nucl. Mater., 1998, 258/263: 1209-1215.

[13] Krautwasser P, Czyrska-Filemonowicz A, Widera M, et al. Thermal stability of dispersoids in ferritic oxide-dispersion-strengthened alloys[J]. Materials Science and Engineering, 1994, 177(1/2): 199-208.

[14] Kishimoto H, Yutani K, Kasada R, et al. Heavy-ion irradiation effects on the morphology of complex oxide particles in oxide dispersion strengthened ferritic steels [J]. J. Nucl. Mater., 2007, 367/370: 490-499.

[15] Lu C Y, Lu Z, Liu C M, et al. Microstructure of nano-structured ODS CLAM steel by mechanical alloying and hot isostatic pressing[J]. J. Nucl. Mater., 2013, 442(1-3): S148-152.

[16] Ohta J, Ohm Ura T, Kako K, et al .Hardness of 12Cr-8Mo ferritic steels irradiated by Ni ions[J]. J. Nucl. Mater.,1995, 225: 187-191.

[17] Alamo A, Lambard V, Averty X, et al. Assessment of ODS-14%Cr ferritic alloy for high temperature applications[J]. J. Nucl. Mater., 2004, 329/333: 333-337.

[18] Sakasegawa H, Chaffron L, Legendre F, et al. Correlation between chemical composition and size of very small oxide particles in the MA957 ODS ferritic alloy[J]. J. Nucl. Mater., 2009, 384(2): 115-118.

[19] Hosemann P, Thau H T, Johnson A L, et al. Corrosion of ODS steels in lead–bismuth eutectic[J]. J. Nucl. Mater., 2008, 373(1-3): 246-253.

[20] Hirata A, Fujita T, Liu C T, et al. Characterization of oxide nanoprecipitates in an oxide dispersion strength ened 14YWT steel using aberration-corrected STEM[J]. Acta Mater., 2012, 60(16): 5686-5696.

[21] Ramar A, Schäublin R. Analysis of hardening limits of oxide dispersion strengthened steel[J]. J. Nucl. Mater., 2013, 432(1-3): 323-333.

[22] Cayron C, Rath E, Chu I, et al. Microstructural evolution of Y₂O₃ and MgAl₂O₄ ODS EUROFER steels during their elaboration by mechanical milling and hot isostatic pressing[J]. J. Nucl. Mater., 2004, 335(1): 83-102.

[23] Lucon E. Mechanical tests on two batches of oxide dispersion strengthened RAFM steel (EUROFER97)[J]. Fusion Engineering and Design, 2002, 61/62: 683-689.

[24] Klimenkov M, Lindau R, Möslang A. New insights into the structure of ODS particles in the ODS-Eurofer alloy[J]. J. Nucl. Mater., 2009, 386/388: 553-556.

[25] Williams C A, Marquis E A, Cerezo A, et al. Nanoscale characterisation of ODS-Eurofer 97 steel: An atom-probe tomography study[J]. J. Nucl. Mater., 2010, 400(1): 37-45.

[26] Cayron C, Rath E, Chu I, et al. Microstructural evolution of Y₂O₃ and MgAl₂O₄ ODS EUROFER steels during their elaboration by mechanical milling and hot isostatic pressing[J]. J. Nucl. Mater., 2004, 335(1): 83-102.

[27] 胡雪, 黄礼新, 严伟, 等. Y₂O₃颗粒弥散强化低活化钢的组织稳定性研究[J]. 金属学报, 2015, 51(6): 641-650.

[28] 胡本芙, 郭丽娜, 杨占兵, 等. 12Cr-ODS钢中氧化物强化相(Y₂O₃)辐照损伤行为研究[J]. 原子能科学技术, 2011, 45(3): 319-323.

[29] KIM I S, CHOI B Y, KANG C Y, et al. Effect of Ti and W on the mechanical properties and microstructure of 12% Cr base mechanical-alloyed nano-sized ODS ferric alloys
[J]. ISIJ International, 2003, 43: 1640.

[30] Xie R, Lu Z, Lu C Y, et al. Effects of mechanical alloying time on microstructure and properties of 9Cr-ODS steels[J]. J. Nucl. Mater., 2014, 455(1-3): 554-560.

[31] Hu K, Li X Q, Yang Chao, et al. Densification and microstructure evolution during SPS consolidation process in W-Ni-Fe system[J]. Transactions of Nonferrous Metals Society of China, 2011, 3: 493-501.

[32] Li Z Y, Lu Z, Xie R, et al. Effect of spark plasma sintering temperature on microstructure and mechanical properties of 14Cr-ODS ferritic steels [J]. Materials Science and Engineering, 2016, 660: 52-60.

[33] 卢晨阳, 吕铮, 余亮, 等. 放电等离子烧结技术制备的纳米结构9Cr-ODS钢及其微观结构分析 [J]. 稀有金属材料与工程, 2016, 45(2): 454-458.

[34] 黄玉柱. 粉末冶金法制备9Cr-ODS/RAFM第一壁结构材料及组织性能研究[D]. 武汉: 华中科技大学, 2012.

[35] Miao P, Odette G R, Yamamoto T, et al. Effects of consolidation temperature, strength and microstructure on fracture toughness of nanostructured ferritic alloys[J]. J. Nucl. Mater., 2007, 367/370:208-212.

[36] Ortega Y, Monge M A, Castro V D, et al. Void formation in ODS EUROFER produced by hot isostatic pressing [J]. J. Nucl. Mater., 2009, 386/388: 462-465.

[37] 郭丽娜, 贾成厂, 胡本芙. 络合溶胶-凝胶法制备氧化物弥散强化12Cr钢中氧化物的形成机制 [J]. 复合材料学报, 2011, 28(4): 124-129.

[38] Kasada R, Toda N, Cho H S, et al. Tensile deformation behavior of oxide-dispersion strengthened ferritic steels[C]. 2005 International Congress on Advances in Nuclear Power Plants (ICAPP′ 05), Seoul, 2005.

Research progress of nano-structured oxide dispersion strengthened steels preparation technology and performance for first wall materials

第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics