A remote communication system based on CAN bus technology for PSM high-voltage power supplies

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2015, Vol. 35 ›› Issue (1): 24-29.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

A remote communication system based on CAN bus technology for PSM high-voltage power supplies

ZHANG Meng, YAO Lie-ying, WANG Ying-qiao

(Southwestern Institute of Physics, Chengdu 610041)

Received:2014-02-19 Revised:2014-09-21 Online:2015-03-15 Published:2015-03-13

基于CAN 总线技术的PSM 电源远程控制通信系统

张猛，姚列英，王英翘

(核工业西南物理研究院，成都 610041)

作者简介:张猛(1988-)，男，山西人，硕士研究生，研究方向：PSM 电源的反馈控制以及远程通信系统。
基金资助:
.

Abstract

Abstract:

In order to enhance the operation efficiency and manipulation reliability of the pulse-step-modulated (PSM) high voltage power supplies of the auxiliary heating system on the HL-2A tokamak a remote communication system based on CAN bus technology is designed and realized. This network system uses a PCI board with a SJA1000 CAN bus controller and several TMS320F2812 digital signal processors as the host node and guest nodes respectively. Combined with a user interface program, the communication system can achieve the function of remote control of the PSM power supplies and hence improve its controllability and operation effectiveness.

Key words: Controller area network, Digital signal processer, Pulse step modulation, High voltage power supply, Remote control

摘要：

为提高HL-2A 装置辅助加热系统脉冲阶梯调制(PSM)电源的运行效率和操作可靠性，设计并实现了一种基于CAN 总线技术的远程控制通信系统。该系统采用载有SJA1000CAN 总线控制器的PCI 板卡以及TMS320F2812 微处理器分别作为上位机和下位机的通信终端，结合用户界面程序，实现了HL-2A 受控核聚变装
置辅助加热电源的远程控制，提高了其整体控制性能和操作效率。

关键词: 控制区域网络, 数字信号处理器, 脉冲阶梯调制电源, 高压电源, 远程控制

CLC Number:

TL62+3

ZHANG Meng, YAO Lie-ying, WANG Ying-qiao. A remote communication system based on CAN bus technology for PSM high-voltage power supplies[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2015, 35(1): 24-29.

张猛，姚列英，王英翘. 基于CAN 总线技术的PSM 电源远程控制通信系统[J]. 核聚变与等离子体物理, 2015, 35(1): 24-29.

[1]	WAN Yin-xiang, WEI Hui-ling, GENG Shao-fei, YU Pei-xuan, ZHOU Bo-wen, LUO Huai-yu, YANG Xian-fu, LI Ming, ZHANG Jin-tao, ZHOU Hong-xia, CAO Jian-yong. Design analysis and optimization of 80kV/50A/20ms high voltage power supply for neutral beam ion source experimental platform [J]. Nuclear Fusion and Plasma Physics, 2023, 43(4): 373-379.
[2]	ZHOU Run-hui, CAO Hong-rui, , ZHAO Jing-long, LIU Shi-xing, ZHANG Wei, LI Qiang, CHEN Kai-yun, YU Hong, HU Li-qun. Research on soft X-ray camera signal self-test using laser diode [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 229-235.
[3]	MAO Xiao-hui, LI Qing, XUAN Wei-min, WANG Ying-qiao, XIA Yu-yang, LI Chun-lin . Development of the high voltage power supply system for ECRH on HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 477-481.
[4]	CHEN Yong, WANG Ying-qiao, LI Hua-jun, LI Wei-bin, YAO Lie-yin, LI Chun-lin. Study of pulse-step-modulation high voltage power communication and feedback control system [J]. Nuclear Fusion and Plasma Physics, 2021, 41(3): 252-257.
[5]	LI Chun-lin, WANG Ying-qiao, YAO Lie-ying,MAO Xiao-hui, LI Qing, ZHOU Pei-hai, CHENG Yong. Development of the HL-2A pulse step modulation high voltage power supply control system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(2): 134-138.
[6]	ZHOU Pei-hai, LI Qing, MAO Xiao-hui, WANG Ya-li, LI Chun-lin. Simulation analysis and experiment of high frequency transformation of pulse step modulation high voltage power supply [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(1): 28-33.
[7]	HUANG Bo, HUANG Mei, CHEN Wen-guang, RAO Jun, FENG Kun, KANG Zi-hua. Design of hardware circuits of solid-state anode high-voltage power supply in electron cyclotron resonance heating system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(1): 55-62.
[8]	WANG Lei1, ZHAO Yan-ping1, HUANG Yi-yun1, JIN Guo-wei2. Modulation type high voltage power supply for ICRH on EAST [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2016, 36(1): 49-54.
[9]	MAO Xiao-hui, LI Qing, WANG Ya-li, XUAN Wei-min, YAO Lie-ying. Design and realization of the control system of the auxiliary heating high-voltage power supply on HL-2A [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2010, 30(4): 350-354.
[10]	SUN Xiao-yang1, LUO Jia-rong1, 2, JI Zhen-shan1, WU Yi-cun1. Central control system for the EAST tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2008, 28(4): 352-356.
[11]	WANG Dong-xia, WANG Mao, SHAN Jia-fang. Distributed acquisition and control system based on QNX [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2007, 27(4): 334-338.
[12]	MAO Xiao-hui，LI Qing，XUAN Wei-min，YAO Lie-ying. The calculation and simulation of the ECRH HV power supply for the HL-2A tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2006, 26(4): 272-276.

A remote communication system based on CAN bus technology for PSM high-voltage power supplies

基于CAN 总线技术的PSM 电源远程控制通信系统

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics