Modified design and analysis for the first wall of CH HCCB TBM

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2014, Vol. 34 ›› Issue (3): 230-234.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Modified design and analysis for the first wall of CH HCCB TBM

WANG Qi-jie, CAO Qi-xiang, ZHAO Zhou, FENG Kai-ming

(Southwestern Institute of Physics, Chengdu 610041)

Received:2013-10-11 Revised:2014-04-02 Online:2014-09-15 Published:2014-09-15

中国氦冷固态增殖剂试验包层模块第一壁的改进设计与分析

王琦杰，曹启祥，赵周，冯开明

(核工业西南物理研究院，成都 610041)

作者简介:王琦杰(1983-) ，男，湖北黄冈人，硕士，研究方向：TBM 设计与分析。

Abstract

Abstract:

Based on the CH HCCB TBM design, the detail of the new modified first wall (FW) was described, and a series related analysis was conducted to compare with former design. In the preliminary analysis, the modified FW design shows much more advantages in comparison with the former design. The working conditions of the analysis have been set to ITER design condition. The performances and the results obtained from thermo-hydraulics and stress analysis are presented.

Key words: ITER, TBM first wall, Thermo-hydraulic, Stress, Safety analysis

摘要：

根据中国氦冷固态增殖剂试验包层模块(CH HCCB TBM)设计方案，对TBM 第一壁进行改进设计，在ITER 相应运行工况条件下，进行了热工水力及应力计算与分析。分析结果表明，改进后的第一壁要求、最大应力值和在最高温度、冷却剂压降及应力分布方面，表现均优于原设计方案第一壁。

关键词: ITER , TBM 第一壁, 热工水力, 应力, 安全分析

CLC Number:

TL62 ⁺ 6

WANG Qi-jie, CAO Qi-xiang, ZHAO Zhou, FENG Kai-ming . Modified design and analysis for the first wall of CH HCCB TBM[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2014, 34(3): 230-234.

王琦杰，曹启祥，赵周，冯开明. 中国氦冷固态增殖剂试验包层模块第一壁的改进设计与分析[J]. 核聚变与等离子体物理, 2014, 34(3): 230-234.

[1]	GU Yong-qi, ZHENG Yuan-yang, YUAN Zhong, WANG Lin, DENG Lei, LI Zhi-hu, ITER TAC Project Consortium Team. The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 19-26.
[2]	TANG Le, CAI Li-jun, LU Yong, YUAN Ying-long, HOU Ji-lai, ZHANG Long, LIU Kuan-cheng, LAI Chun-lin . Preload analysis of screw bolt joints on the HL-3 carbon-based first wall [J]. Nuclear Fusion and Plasma Physics, 2024, 44(2): 177-182.
[3]	WANG Fu-jia, CHEN De-hong, XU Guo-sheng, WU Jia-rong, WAN Bao-nian. Research on stress mitigation for toroidal field coils of a high magnetic field tokamak [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 1-6.
[4]	CHEN Xian-feng, QIN Shi-jun , WANG Qing-feng , CAO Jin, MAO Xin , LIU Peng , FENG xing . Reliability experimental tests and analysis for tokamak monoblock-structural divertor under high-temperature condition [J]. Nuclear Fusion and Plasma Physics, 2023, 43(3): 283-289.
[5]	ZHANG Yong, WU Jie-feng, Liu Song-lin , LEI Ming-zhun , WANG Wan-jing , MA Jian-guo. Simulation analysis on the first wall electron beam welding of water cooled ceramic breeder blanket [J]. Nuclear Fusion and Plasma Physics, 2023, 43(3): 290-297.
[6]	JIANG Tao , WANG Quan-ming , HE Kai-hui , WU Shu-qin . 3D collaborative design for ITER project [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 6-11.
[7]	ZENG Hao , FENG Kun , LIU Li-juan , BAI Xin-yu , WANG Chao , CHENG Ya-li , LIANG Jun , LU Bo. Optimal design of the microwave exciter for LHCD system [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 68-74.
[8]	LONG Ting, Diamond P H, KE Rui, HONG Rong-jie, XU Min, NIE Lin, WANG Zhan-hui, LI Bo, GAO Jin-ming, HL-M Team. Experimental studies of edge shear flow and poloidal residual stress in proximity to the density limit of HL-2A tokamak [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 152-157.
[9]	LING Qi-xin, MA Xue-bin, LIU Song-lin. Thermo-hydraulics analysis and optimization for the module of CFETR WCCB [J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 301-307.
[10]	CHEN Chang, JIANG Ke-cheng, WANG Wan-jing, LIU Song-lin. Study on the effect of the manufacturing tolerance of WCCB blanket first wall on the heat transfer and thermal stress [J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 314-321.
[11]	ZHANG Biao, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and test of superconducting joint for ITER calibration field magnet [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 206-206.
[12]	YIN Zhong-hui, MA Qiang, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and pressure drop experiment of helium tube for ITER bottom correction coils [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 210-215.
[13]	ZHOU Run-hui, CAO Hong-rui, , ZHAO Jing-long, LIU Shi-xing, ZHANG Wei, LI Qiang, CHEN Kai-yun, YU Hong, HU Li-qun. Research on soft X-ray camera signal self-test using laser diode [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 229-235.
[14]	WU Jing, CHEN Ji-ming, WANG Ping-huai, WANG Zheng-yu, KANG Wei-shan, GAO Hui. Thermal hydraulic analysis for ITER enhanced heat flux first wall of pipe joint assembly type [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 28-34.
[15]	KANG Dao-an, LI Peng-yuan, SUN Zhen-chao, ZHANG Teng, HAN Shi-lei, ZHAO Xiao-guang. Research of manufacturing technology of 316LN U-shaped clamp for ITER magnet supports [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 39-44.

Modified design and analysis for the first wall of CH HCCB TBM

中国氦冷固态增殖剂试验包层模块第一壁的改进设计与分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics