Test platform design of three-dimensional loading test for the prototype of ITER TF magnet supports

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2013, Vol. 33 ›› Issue (1): 54-59.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Test platform design of three-dimensional loading test for the prototype of ITER TF magnet supports

HOU Bing-lin, LI Peng-yuan, YANG Shu-juan, PAN Chuan-jie, LIAO Min, CHEN Hui, WANG Yue, ZHANG Bo

(1. Southwestern Institute of Physics, Chengdu 610041;2. China International Nuclear Fusion Energy Program Execution Center Ministry of Science and Technology, Beijing 100038)

Received:2012-05-23 Revised:2012-11-21 Online:2013-03-15 Published:2013-03-15

ITER纵场磁体支撑原型件三维加载测试平台设计

侯炳林1，李鹏远1，杨淑娟1，潘传杰1，廖敏1，陈辉1，王跃1，张博2

(1. 核工业西南物理研究院，成都 610041；2. 中国科技部ITER执行中心，北京 100083)

作者简介:侯炳林(1972-)，男，四川省安岳县人，博士，高级工程师，主要从事聚变装置结构研究工作。
基金资助:
中国国际热核聚变实验堆(ITER)国内专项任务资助项目(2008GB107001；2008GB107002)

Abstract

Abstract:

In order to gain the high reliability of the gravity support (GS), the three-dimensional mechanical loading test of GS，used for stimulating ITER operation load cases, should be performed using GS prototype. To carry out this test, a special test platform for GS prototype is designed based on the dangerous ITER operation load cases, and finite element analysis (FEM) of this platform is conducted. FEM analysis shows that the intensity and stiffness of the test platform are sufficed, and that it can meet the accuracy requirements of the three-dimensional loading test for GS prototype. An acceptable criterion for this platform is designed，and the reliability of the platform is testified by this criterion.

Key words: ITER magnet gravity supports, 3-dimensional loading, Test platform, Design option

摘要：

根据ITER运行的主要危险工况，设计了一个专用的三维加载测试平台，并对该测试平台进行了结构有限元分析。有限元分析结果表明，三维测试平台结构有足够的强度和刚度，能满足磁体支撑原型件的三维加载测试的精度要求，可以用该设计方案进行制造。为了确信三维加载测试的可靠，制定了专门的三维加载测试平台的验收方案并按此方案对测试平台进行了可靠性测试。

关键词: ITER磁体重力支撑, 三维加载, 测试平台, 设计方案

CLC Number:

TL62+6

HOU Bing-lin, LI Peng-yuan, YANG Shu-juan, PAN Chuan-jie, LIAO Min, CHEN Hui, WANG Yue, ZHANG Bo. Test platform design of three-dimensional loading test for the prototype of ITER TF magnet supports[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2013, 33(1): 54-59.

侯炳林1，李鹏远1，杨淑娟1，潘传杰1，廖敏1，陈辉1，王跃1，张博2. ITER纵场磁体支撑原型件三维加载测试平台设计[J]. 核聚变与等离子体物理, 2013, 33(1): 54-59.

Test platform design of three-dimensional loading test for the prototype of ITER TF magnet supports

ITER纵场磁体支撑原型件三维加载测试平台设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics