Optimization design of first wall structure of Chinese TBM for ITER solid breeder blanket

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2007, Vol. 27 ›› Issue (4): 311-314.

• Research Report • Previous Articles Next Articles

Optimization design of first wall structure of Chinese TBM for ITER solid breeder blanket

YUAN Tao, FENG Kai-ming, WANG Xiao-yu, CHEN Zhi

(Southwestern Institute of Physics, Chengdu 610041)

Received:2007-02-09 Revised:2007-09-04 Online:2007-12-15 Published:2011-05-30

中国ITER固态试验包层模块第一壁结构优化

袁涛，冯开明，王晓宇，陈志

(核工业西南物理研究院，成都 610041)

作者简介:袁涛(1976-），男，四川江油人，硕士，2005年核工业西南物理研究院硕士毕业，现从事聚变堆及包层结构设计和分析研究。

Abstract

Abstract:

Based on structure design and thermo-hydraulic analysis of the ITER HCSB TBM, the first wall, which is the most important component of the TBM, is optimized. The code of programmable command stream of the finite element ANSYS is used to simulate the temperature and stress field of front panel in the first wall structure of the HCSB TBM. The optimized scheme of front panel of the first wall has been presented within the constraints of the temperature and stress of structure material.

Key words: ITER, Test blanket module, Blanket design, Structure optimization

摘要：

在ITER试验包层模块HC-SB TBM结构设计和热工计算分析的基础上，对包层模块中的重要部件第一壁做了优化分析。利用有限元分析软件ANSYS的可编程命令流模式，对HC-SB TBM第一壁前壁进行了温度和应力的数值模拟，在满足结构材料的许用温度和应力的前提下，给出了第一壁前壁的最佳设计方案。

关键词: 国际热核实验堆, 试验包层, 模块设计, 结构优化

CLC Number:

TL62+2

YUAN Tao, FENG Kai-ming, WANG Xiao-yu, CHEN Zhi. Optimization design of first wall structure of Chinese TBM for ITER solid breeder blanket[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2007, 27(4): 311-314.

袁涛，冯开明，王晓宇，陈志. 中国ITER固态试验包层模块第一壁结构优化[J]. 核聚变与等离子体物理, 2007, 27(4): 311-314.

[1]	GU Yong-qi, ZHENG Yuan-yang, YUAN Zhong, WANG Lin, DENG Lei, LI Zhi-hu, ITER TAC Project Consortium Team. The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 19-26.
[2]	HAO Yu, HUANG Xiang-mei, LIU Xi-gang, LI Bo, LI Wei . Numerical simulation and structure optimization of air intake for leak detection of manifold in gas injection system [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 169-174.
[3]	YANG Yin, JIANG Tao, XIA Zhi-wei . Structure analysis and optimization of gas injection pipeline in tokamak [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 185-190.
[4]	JIANG Tao , WANG Quan-ming , HE Kai-hui , WU Shu-qin . 3D collaborative design for ITER project [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 6-11.
[5]	ZENG Hao , FENG Kun , LIU Li-juan , BAI Xin-yu , WANG Chao , CHENG Ya-li , LIANG Jun , LU Bo. Optimal design of the microwave exciter for LHCD system [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 68-74.
[6]	ZHANG Biao, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and test of superconducting joint for ITER calibration field magnet [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 206-206.
[7]	YIN Zhong-hui, MA Qiang, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and pressure drop experiment of helium tube for ITER bottom correction coils [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 210-215.
[8]	ZHOU Run-hui, CAO Hong-rui, , ZHAO Jing-long, LIU Shi-xing, ZHANG Wei, LI Qiang, CHEN Kai-yun, YU Hong, HU Li-qun. Research on soft X-ray camera signal self-test using laser diode [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 229-235.
[9]	WU Jing, CHEN Ji-ming, WANG Ping-huai, WANG Zheng-yu, KANG Wei-shan, GAO Hui. Thermal hydraulic analysis for ITER enhanced heat flux first wall of pipe joint assembly type [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 28-34.
[10]	KANG Dao-an, LI Peng-yuan, SUN Zhen-chao, ZHANG Teng, HAN Shi-lei, ZHAO Xiao-guang. Research of manufacturing technology of 316LN U-shaped clamp for ITER magnet supports [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 39-44.
[11]	LU Yong, CAI Li-jun, HUANG Wen-yu, LIU Yu-xiang, LAI Chun-lin, LIU Jian, ZHANG Wei, LI Zai-xin . Structure design and process analysis of limiter system for the HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 351-354.
[12]	WANG Ze-hui, LIU Bai-qi, YANG Juan-cheng, CHEN Long, NI Ming-jiu. Spreading test platform and preliminary experiment of liquid lithium limiter [J]. Nuclear Fusion and Plasma Physics, 2021, 41(3): 264-269.
[13]	YANG Ya-long1, 2, 3, XU Qiang-lin1, 3, LIU Wei1, 3, GAO Ge2. Analysis on network topology delay of ITER PF power supply field layer monitoring system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 150-156.
[14]	ZHENG Yuan-yang, GU Yong-qi, YUAN Zhong, LIU Chen, WANG Jun, JIN Jing, HAN Hou-xiang. Study on the inspection of welding deformation in the development of ITER ELM coils [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 162-166.
[15]	HU Wan-peng, CAI Lai-zhong. Particle simulation of heat deposition on the ITER-like divertor tile surface [J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 16-20.

Optimization design of first wall structure of Chinese TBM for ITER solid breeder blanket

中国ITER固态试验包层模块第一壁结构优化

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics