Analysis of thermal stress for a grid of 60kV-55A-2s ion source

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2006, Vol. 26 ›› Issue (4): 263-267.

• Contents • Previous Articles Next Articles

Analysis of thermal stress for a grid of 60kV-55A-2s ion source

ZHOU Gui-qing, JIANG Shao-feng, LEI Guang-jiu, ZHOU Cai-pin

（Southwestern Institute of Physics, Chengdu 610041）

Received:2005-12-08 Revised:2006-08-16 Online:2006-12-15 Published:2011-12-26

60kV-55A-2s离子源电极栅的热应力计算与分析

邹桂清，姜韶风，雷光玖，周才品

（核工业西南物理研究院，成都610041）

作者简介:邹桂清（1980-），女，硕士研究生，从事长脉冲大功率离子源技术研究。

Abstract

Abstract:

Analysis of thermal stress for a grid of ion source with 60kV, 55A and 2s is carried out using finite element method. Numerical simulation for transient temperature indicates that it takes 6s to make thermal balance, and the maximum temperature is less than 100℃ at 2s. The results indicate no melt and no plastic deformation on the grid under a heat loads of 2.0MW•m^-2 with cooling water velocity of 10m•s^-1. The most dangerous point and the maximum displacement of the grid are also shown in the paper.

Key words: High-power ion source, Grid, Thermal stress

摘要：

利用有限元单元法对60kV-55A-2s离子源地电极栅进行了热应力分析。在热载荷为1.0MW•m^-2、冷却水流速为5m•s^-1时，通过瞬态温度场计算得到了地电极栅达到热平衡时间为6s、2s时的最高温度低于100℃的结果。热应力场分析结果显示，电极的热变形属于二维翘曲；在载荷密度低于2.0MW•m^-2时，电极栅可以保持在弹性变形范围内。

关键词: 大功率离子源, 电极, 热应力

CLC Number:

TL62+9

ZHOU Gui-qing, JIANG Shao-feng, LEI Guang-jiu, ZHOU Cai-pin. Analysis of thermal stress for a grid of 60kV-55A-2s ion source[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2006, 26(4): 263-267.

邹桂清, 姜韶风, 雷光玖, 周才品. 60kV-55A-2s离子源电极栅的热应力计算与分析[J]. 核聚变与等离子体物理, 2006, 26(4): 263-267.

[1]	WANG Jian-sheng, WU Ya-nan, MAO Hua-feng, LI Jun, MAO Zhi-wei, LU Jing, XU Liu-wei. Analysis of capacitor voltage imbalance at DC side of cascade STATCOM [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 51-57.
[2]	XIE Ya-hong, , XIE Jun-wei, , WEI Jiang-long , GU Yu-ming , JIANG Cai-chao, , PAN Jun-jun, , XU Yong-jian, , XIE Yuan-lai, , HU Chun-dong. Design and experimental research of magnetic filter for large area negative ion beam source [J]. Nuclear Fusion and Plasma Physics, 2023, 43(4): 407-411.
[3]	YI Wei , HU Chun-dong, , XIE Yuan-lai, , XIE Ya-hong, , LIU Wei , WEI Jiang-long , GU Yu-ming , LIANG Li-zhen, , TAO Ling , CUI Qing-long , ZHAO Yuan-zhe , JIANG Cai-chao , XU Yong-jian, . Design of constant temperature water supply system for CFETR N-NBI verification prototype [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 62-67.
[4]	CHEN Chang, JIANG Ke-cheng, WANG Wan-jing, LIU Song-lin. Study on the effect of the manufacturing tolerance of WCCB blanket first wall on the heat transfer and thermal stress [J]. Nuclear Fusion and Plasma Physics, 2022, 42(3): 314-321.
[5]	MENG Jian-peng, JIR Riu-bao, CAI Qiang, QIU Li-yuan, XIE Yan-feng . Simulation analysis and optimization of piping stress in baking system of HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 388-391.
[6]	SHEN Jun-tian1, 2, YUAN Ying-long1, YAO Lie-ming2, ZHANG Wang1, 2, CHEN Ya-jing1, 2, ZHOU Ming-tao1, 2, WEN Hao1, 2, WU Jing2. Thermal fatigue analysis of HL-2M snowflake-minus divertor [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(4): 324-330.
[7]	LENG Zhen, CHEN Ji-ming, WANG Kun, KANG Wei-shan, HUANG Pan. Thermal stress and elastic-plastic structural analysis of the ITER first wall beryllium-copper interface defects [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2018, 2(2): 199-204.
[8]	MA Ding-hui, RAO Jun, CAO Jian-yong, WEI Hui-ling, CHEN Wen-guang, WANG Ming-wei. Study on suppressor gird power supply of NBI ion source on HL-2A tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2012, 32(4): 332-337.
[9]	LI Jun-feng, NI Ming-jiu. Development of a consistent and conservative scheme on a staggered grid for liquid metal MHD flows [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2011, 31(3): 219-223.
[10]	LI Jun-feng, NI Ming-jiu. Development of a consistent and conservative scheme on a staggered grid for liquid metal MHD flows [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2011, 31(3): 219-223.
[11]	YANG Chang-chun, PAN Wan-jiang. Design and analysis on ITER axial insulation breaks [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2010, 30(3): 272-276.
[12]	LI Yong, LIU De-quan, RAN Hong, CAI Li-jun, CAO Zeng, LI Qiang. Preliminary analysis for gravity support and vacuum vessel of different cross-sections on HL-2M tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2009, 29(3): 229-233.
[13]	LIU Liang, SHAN Jia-fang, LIU Fu-kun, KUANG Guang-li. Design of a new ceramic window in 3.7GHz LHCD transmission system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2007, 27(1): 48-51.
[14]	YI Liang-bi, ZENG Jian-er, LI Guang-sheng, ZHANG Jin-song. Analysis of stress on the L HCD system during baking the HL22A tokamak [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2006, 26(1): 17-21.

Analysis of thermal stress for a grid of 60kV-55A-2s ion source

60kV-55A-2s离子源电极栅的热应力计算与分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 14

Recommended Articles

Metrics