[1] 薛晓艳, 张卫卫, 左浩毅, 等. 氩气驱动液态锂回路的总体设计及初步运行结果 [J]. 核聚变与等离子体物理, 2015, 35 (2): 170-174.
[2] Moir R W. The logic behind thick, liquid-walled, fusion concepts [J]. Nucl. Eng. Design, 1995, 29(3): 34-42.
[3] Mattas R F, Abdou, M A. Liquid divertor and first wall concepts and critical issues [R]. Ninth International Conference on Fusion Reactor Materials (ICFRM-9), Colorado Springs, Colorado, 1999.
[4] Brooks J N, Allain J P, Bastasz R, et al. Overview of the ALPS program [J]. Fusion Science and Technology, 2005, 47: 669-677.
[5] Khripunov B I, Petrov V B, Shapkin V V, et al. Lithium surface operating under steady-state power load [J]. Fusion Engineering and Design, 2003, 65: 449-454.
[6] Khripunov B I, Petrov VB, Shapkin V V. Liquid lithium surface research and development [J]. J. Nucl. Mater., 2003, 313: 619-624.
[7] Allain J P, Whyte D G, Brooks J N. Lithium erosion experiments and modelling under quiescent plasma conditions in DⅢ-D [J]. Nucl. Fusion, 2004, 44: 655 -664.
[8] Tabarés F L, Ochando M A, Medina F, et al. Plasma performance and confinement in the TJ-11 stellarator with lithum-coated walls [J]. Plasmas Phys. Contr. Fusion, 2008, 50: 124051.
[9] Soonwook Jung, Daniel Andruczyk, David N Ruzic. Laboratory investigation of vapor shielding for lithium- coated molybdenum in Devex [J]. IEEE Transactions on Plasma Science, 2012, 40(3): 730-734.
[10] Ono M, Bell M G, Hirooka Y, et al. Conference report on the 2nd international symposium on lithium application for fusion devices [J]. Nucl. Fusion, 2012, 5: 037001.
[11] Bell M G, Kugel H W, Kaita R, et al. Plasma response to lithium-coated plasma-facing components in the National Spherical Torus [J]. Plasma Phys. Contr. Fusion, 2009, 51: 12405-124065.
[12] Federici G, Skinner C H, Brooksc J N, et al. Plasma-material interactions in current tokamaks and their implications for Next Step Fusion Reactors [J]. Nucl. Fusion, 2001, 41: 1967.
[13] Doerner R P, Baldwin M J, Conn R W, et al. Measurements of erosion mechanisms from solid and liquid materials in PISCES-B [J]. J. Nucl. Mater., 2001, s290-293: 166-172.
[14] Baldwin M J, Doerner R P, Causey R, et al. Recombination of deuterium atoms on the surface of molten Li-LiD [J]. J. Nucl. Mater., 2002, 306: 15.
[15] Allain J P, Nieto M, Coventry M D, et al. Studies liquid—metal erosion and flee surface flowing liquid lithium retention of helium at the university of lllinois [J]. Fusion Engineering and Design, 2004, 72(1-3): 93-110.
[16] Nieto M, Ruzic D N, Olczak W, et al. Measurement ofimplanted helium particle transport by a flowing liquid lithium film [J]. J. Nuc1. Mater., 2006, 350: 101-l12.
[17] Stubbersa R, Olczak W, Nieto M, et al. Measurement of hydrogen absorption in flowing liquid lithium in the flowing lithium retention experiment(FLIRE) [J]. J. Nuc1. Mater., 2005, 337-339: 033-1037.
[18] Nieto M, Ruzic D N, Allain J P, et al. Helium retention and difusivity in flowing liquid lithium [J]. J. Nuc1. Mater., 2003, 3l3-316: 646-650.
[19] Lutz T J, Nygren R E, Tanaka T J, et al. Measurements of lithium flow with an EM flowmeter in LIMITS [J]. Fusion Engineering IEEE/NPSS Symposium on, 2003, 367-370.
[20] Ren J, Zuo G Z, Hu J S, et al. A flowing liquid lithium limiter for the experimental advanced superconducting tokamak [J]. Rev. Sci. Instrum., 2015, 86: 023504. |