主破裂事故下中国固态实验包层模块电磁场分析

核聚变与等离子体物理 ›› 2012, Vol. 32 ›› Issue (4): 338-343.

主破裂事故下中国固态实验包层模块电磁场分析

陈颜静，冯开明，张国书，栗再新

(核工业西南物理研究院，成都 610041)

收稿日期:2012-03-12 修回日期:2012-08-15 出版日期:2012-12-15 发布日期:2012-12-14
作者简介:陈颜静(1977-)，男，重庆忠县人，博士研究生，助理研究员，从事聚变堆包层技术研究。
基金资助:
ITER专项国内配套项目资助(2009GB108000)

Electromagnetic analysis on China HCCB-TBM design under major disruption

CHEN Yan-jing, FENG Kai-ming, ZHANG Guo-shu, LI Zai-xin

(Southwestern Institute of Physics, Chengdu 610041)

Received:2012-03-12 Revised:2012-08-15 Online:2012-12-15 Published:2012-12-14

摘要/Abstract

摘要：

本文基于中国固态实验包层模块(CN HCCB-TBM)优化设计，应用ANSYS软件参数化语言编程方法，对中国固态TBM在ITER等离子体两种主破裂事故下的电磁载荷进行了评估与分析，并利用分析结果进行了电磁-结构和电磁-热的耦合计算。研究结果表明中国固态TBM的更新结构设计在等离子体瞬态变化中符合安全设计要求。

关键词: 中国固态实验包层模块, 等离子体破裂, 电磁载荷, 耦合计算

Abstract:

Under two major disruptions of ITER Plasma the electromagnetic loads on the updated design of CN HCCB-TBM have been performed by using ANSYS Parametric Design Language. The stress and temperature analyses have been obtained by applying multi-physical fields’ calculations such as magnet-structure and magnet-heat coupling in this paper. The results showed that the maximum stress is ~26.2MPa, which was as low as the allowable value of RAFM(CLF-1). Due to the interaction of eddy current and resistance the Joule heat caused the temperature of TBM to rise to ~0.1K, which had less influence to the thermo-hydraulic design of TBM. The evaluations of EM loads on TBM have been showed that the updated structural design of TBM was safe which can overcome the EM loads brought by two kinds of major disruptions.

Key words: CN HCCB-TBM, Plasma disruption, Electromagnetic loads, Coupling calculation

中图分类号:

TL62+6

陈颜静，冯开明，张国书，栗再新. 主破裂事故下中国固态实验包层模块电磁场分析[J]. 核聚变与等离子体物理, 2012, 32(4): 338-343.

CHEN Yan-jing, FENG Kai-ming, ZHANG Guo-shu, LI Zai-xin. Electromagnetic analysis on China HCCB-TBM design under major disruption[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2012, 32(4): 338-343.

参考文献

[1] ITER research plan[Z]. ITER_Research_Plan_2FB8AC V2.2, November 12, 2009.

[2] 冯开明. ITER实验包层计划综述[J]. 核聚变与等离子体物理, 2006, 26(3): 162.

[3] Boccaccini L V, Fischer U, Kleefeldt K, et al. Strategy for the blanket testing in ITER[J]. Fusion Engineering and Design, 2002, 61-62: 423-429.

[4] 高椿明, 陈志, 冯开明, 等. 中国ITER实验包层模块电磁安全分析初步[J]. 核聚变与等离子物理, 2006, 26(3): 203.

[5] Feng K M, Zhang G S, Wang X Y, et al. Design description document for the Chinese helium-cooled solid breeder TBMs[R]. Chengdu: Southwestern Institute of Physics, 2004.

[6] Feng K M, Pan C H, Zhang G S, et al. Preliminary design for a China ITER test blanket module[J]. Fusion Engineering and Design, 2006, 81: 1219-1224.

[7] Pan C H. Progress/update for TBM-related activities and planning/schedule of CN TBM program[R]. 4rd Meeting of the ITER Council TBM Program Committee, October 22-23, 2010, Chateau de Cadarache, France.

[8] Load specification (LS) – annex of project integration document (PID) ITER_D_222QGL V 3.0[Z]. July 2005.

[9] Bachmann C. Load specification for the ITER vacuum vssel[R]. ITER_D_2F52JY, V.2.4[Z]. January 4, 2011.

[10] ANSYS documentation[Z]. ANSYS Co. Ltd., 2008.

[11] Roccella R, Boccaccini L V, Meyder R, et al. Assessment of EM loads on the EU HCPB TBM during plasma disruption and normal operating scenario

including the ferromagnetic effect[J]. Fusion Engineering and Design, 2008, 83: 1212-1216.

[12] Wang Pinghuan, Chen Jiming, Liu Shi, et al. Preliminary results on the research of CLF-1 steel[R]. Presented at 9th China-Japan Symposium on material of advanced energy and fusion-fission engineering, Oct. 23-26, 2007.