2D/3D electromagnetic analysis for CFETR vacuum vessel

doi:10.16568/j.0254-6086.201703005

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2017, Vol. 37 ›› Issue (3): 274-278.DOI: 10.16568/j.0254-6086.201703005

• Plasma Physics • Previous Articles Next Articles

2D/3D electromagnetic analysis for CFETR vacuum vessel

YAO Yao, LU Kun, GE Jian, NI Xiao-jun

(1. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031; 2. University of Science and Technology of China, Hefei 230026)

Received:2016-05-30 Revised:2017-02-27 Online:2017-09-15 Published:2017-09-14

2D/3D CFETR真空室电磁计算

姚尧1, 2，陆坤1，葛剑1，倪小军*1

(1. 中国科学院等离子体物理研究所，合肥 230031；2. 中国科学技术大学，合肥 230026)

作者简介:姚尧(1993–)，男，湖北天门人，硕士研究生，核能科学与工程专业。
基金资助:
国家磁约束核聚变能发展研究专项(2015GB107000)

Abstract

Abstract:

The 2D/3D electromagnetic analyses based on ANSYS were carried out for simplified CFETR vacuum vessel. The distributions of magnetic field and electromagnetic force in vacuum vessel were obtained. The results show that the distributions of magnetic field and electromagnetic force in 2D/3D vacuum vessels are nearly consistent. The results indicate that the 3D ANSYS model can be replaced by 2D ANSYS model for electromagnetic analyses for future simplified vacuum vessels.

Key words: 2D/3D electromagnetic analyses, CFETR, Vacuum vessel, Electromagnetic analysis

摘要：

基于ANSYS对CFETR真空室简化模型进行了2D/3D电磁分析，得到了真空室磁场强度以及电磁力的分布。分析结果显示2D/3D真空室的磁场强度及电磁力分布基本一致，这表明了可以使用2D模型替代3D模型对未来真空室简化模型进行电磁分析。

关键词: 2D/3D电磁分析, 中国聚变工程实验堆, 真空室, 电磁计算

CLC Number:

TL62+8

YAO Yao, LU Kun, GE Jian, NI Xiao-jun. 2D/3D electromagnetic analysis for CFETR vacuum vessel[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(3): 274-278.

姚尧1, 2，陆坤1，葛剑1，倪小军*1. 2D/3D CFETR真空室电磁计算[J]. 核聚变与等离子体物理, 2017, 37(3): 274-278.

[1]	ZHANG Li-yuan, WANG Xiao-jie , WU Da-jun , TANG Yun-ying , WANG Han-lin, LIU Fu-kun. Preliminary structure design and analysis of CFETR ECRH system launcher [J]. Nuclear Fusion and Plasma Physics, 2024, 44(3): 267-274.
[2]	ZHANG Xi-yang , XU Tie-jun , YAO Da-mao. Design of CFETR divertor cryo-pump pumping system and calculation of effective pumping speed [J]. Nuclear Fusion and Plasma Physics, 2024, 44(3): 275-281.
[3]	JI Hai-biao, XING Yin-long, WU Jie-feng, LIU Zhi-hong , WEN Wei, LIN Xiao-dong. Test and analysis on outgassing performance of insulation material G10 for future fusion reactor [J]. Nuclear Fusion and Plasma Physics, 2024, 44(3): 318-322.
[4]	JI Hai-biao, MA Jian-guo, LIU Zhi-hong, WU Jie-feng, WU Hua-peng, FAN Xiao-song, ZHONG Ya-qi, LIN Xiao-dong, GAO Xiang. Research on high-precision assembly technology for the vacuum vessel sector of the future fusion reactor [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 19-23.
[5]	CHAI Yong-sheng, CUI Li-min, GE Jian, CHEN Zhao-bo, ZHANG Long, PANG Xue-wei. Preliminary design and thermal analysis of CFETR expansion plate cryostat thermal shield [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 36-42.
[6]	GAO Ze-shi, , WANG Ya-lei, LI Yan-long, TIAN Wen-xi, CAI Lai-zhong, WU Xue-ke, LIAN Qiang, LI Xin-ze, WANG Zhan-hui. Simulation of CFETR parallel heat flux and blanket power deposition under radial turbulent transport [J]. Nuclear Fusion and Plasma Physics, 2024, 44(1): 65-71.
[7]	HU Bo, HUANG Wen-yu, ZHOU Bing, WANG Xiao-yu, WANG Yan-ling, LU Yong, ZHANG Long, LIU Kuan-cheng. Radioactive leakage analysis in LOCA accident for helium cooling divertor loop of CFETR [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 150-155.
[8]	YANG Wen-jun , GONG Xue-yu , GAO Xiang , LI Xiao-e. Preliminary simulation investigation of the energetic particle transport on CFETR [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 232-237.
[9]	WANG Jun , WANG Zhan-hui , SHI Yong-fu , LI Jing-chun. 1/2 dimensional integrated simulation of CFETR steady state operation scenario and analysis of the impact of impurity particle ratio [J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 243-248.
[10]	GONG Zheng, HAN Song-bo , NI Xiao-jun , GE Jian , HUANG Jian-jun , YU Bin, GAO Xiang, SUN Jin-xing. Structural stability analysis of CFETR vacuum vessel based on finite element method [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 38-42.
[11]	ZHONG Yun-ke, CHEN Xin, ZHU Gen-liang, YANG En-peng, FU You-kun, CAI Li-jun, LI Qiang . Preliminary RAMI analysis of CFETR 25kW 4.5K helium refrigerator [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 55-61.
[12]	YI Wei , HU Chun-dong, , XIE Yuan-lai, , XIE Ya-hong, , LIU Wei , WEI Jiang-long , GU Yu-ming , LIANG Li-zhen, , TAO Ling , CUI Qing-long , ZHAO Yuan-zhe , JIANG Cai-chao , XU Yong-jian, . Design of constant temperature water supply system for CFETR N-NBI verification prototype [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 62-67.
[13]	HAO Bao-long , CHEN Wei , LI Guo-qiang , WANG Xiao-jing , WU Bin , GAO Xiang , CFETR TEAM . Application of high energetic particle redistribution model in CFETR [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 105-111.
[14]	SONG Qiang, YANG Jin-hong, LU Ye, GUI Teng, WANG Wei-hua. Discharge simulation and electromagnetic simulation analysis of CFETR snowflake divertor configuration [J]. Nuclear Fusion and Plasma Physics, 2022, 42(s1): 144-151.
[15]	XU Wan-yun, WANG Cai-wang, LUO Rong-rong, HUANG Chao, LI Peng-yuan, XU Fa-yong, DENG Hua-lin, CHEN Hui . The conceptual design of maintenance and decommission process for the CFETR tritium-generating blanket and divertor in the hot cell [J]. Nuclear Fusion and Plasma Physics, 2022, 42(4): 378-382.

2D/3D electromagnetic analysis for CFETR vacuum vessel

2D/3D CFETR真空室电磁计算

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics