Welcome to Nuclear Fusion and Plasma Physics, Today is Share:

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2014, Vol. 34 ›› Issue (3): 252-258.

• Nuclear Fusion Engineering and Technology • Previous Articles     Next Articles

Design of constant current charging power supply for J-TEXT ohmic field capacitor banks

Lü Shu-dong1, 2, ZHANG Ming1, 2, YANG Cheng1, RAO Bo1, 2, YU Ke-xun1, 2   

  1. (1. State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan 430074; 2. School of Electrical and Electronics Engineering, Huazhong Universityof Science and Technology, Wuhan 430074)
  • Received:2013-09-08 Revised:2014-04-12 Online:2014-09-15 Published:2014-09-15

J-TEXT 加热场电容器组恒流充电电源设计

吕书栋 ,张 明 ,阳 成 ,饶 波 ,于克训   

  1. (1. 强电磁工程与新技术国家重点实验室,武汉430074;2. 华中科技大学电气与电子工程学院,武汉430074)
  • 作者简介:吕书栋(1988-) ,男,山东莱芜人,硕士研究生,研究方向电力电子和脉冲功率技术。
  • 基金资助:

    国际热核聚变试验堆(ITER)计划专项资助项目(2010GB108001)

Abstract:

The charging characteristic of the capacitor charging power supply was analyzed with practical series resonant topology. The method that setting two current taps and regulating PWM switching frequency was putted forward with close loop controlling algorithm to charge the multi-group capacitor banks with constant current. A capacitor charging power supply with the max output current 6.5A and the max output voltage 2000V is designed. Experimental results show that, this power supply can charge the four capacitor banks to any four different voltages in 1 minute with charging accuracy less than 1%, and meet the requirements of J-TEXT ohmic field power system.

Key words: Constant current charging, Series resonant, CCPS

摘要:

分析了实际串联谐振电容充电电源的充电特性,提出通过设置两个电流档位,闭环调节PWM开关频率,实现了对多组电容器组恒流充电。设计了最大输出电流为6.5A,最大输出电压为2000V的电容充电电源。测试结果表明,该电源可以在1分钟内将四组电容器组同时充至2000V以内不同的任意电压,充电精度小于1%,能够满足J-TEXT加热场电源运行需求。

关键词: 恒流充电, 串联谐振, 电容器充电电源

CLC Number: