Primary structure and seismic response analysis of the ITER transfer cask

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2009, Vol. 29 ›› Issue (3): 270-274.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Primary structure and seismic response analysis of the ITER transfer cask

WANG Fen-fen, YAO Da-mao, LI Ge

(Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)

Received:2008-08-12 Revised:2009-02-09 Online:2009-09-15 Published:2010-08-18

ITER遥控运输车初步结构及抗震分析

王芬芬, 姚达毛, 李格

(中国科学院等离子体物理研究所，合肥 230031)

作者简介:王芬芬(1983–)，女，湖北荆门人，中国科学院等离子物理研究所硕士研究生，研究方向为机械设计与分析。
基金资助:
中国科学院合肥物质科学研究院院长基金重大项目(YZJJ-4)

Abstract

Abstract:

The primary structure and the work situation of the ITER transfer cask were introduced. Based on the mode analysis of the transfer cask model, seismic spectrum response analysis was conducted by the finite element method. The results showed that the transfer cask was safe under seismic state. The results will provide some reference data for further optimization of structure design and future experiment of the transfer cask.

Key words: ITER, Transfer Cask, Seismic analysis, Mode analysis, Spectrum response

摘要：

阐述了ITER遥控运输车初步结构和工作状况，运用有限元方法对其进行模态分析并在地震载荷作用下进行加速度反应谱分析，验证了遥控运输车在地震情况下的安全性并给下一步的优化设计和实验提供了参考数据。

关键词: ITER, 遥控运输车, 地震分析, 模态分析, 谱分析

CLC Number:

TL6.2+7

WANG Fen-fen, YAO Da-mao, LI Ge. Primary structure and seismic response analysis of the ITER transfer cask[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2009, 29(3): 270-274.

王芬芬, 姚达毛, 李格. ITER遥控运输车初步结构及抗震分析[J]. 核聚变与等离子体物理, 2009, 29(3): 270-274.

[1]	GU Yong-qi, ZHENG Yuan-yang, YUAN Zhong, WANG Lin, DENG Lei, LI Zhi-hu, ITER TAC Project Consortium Team. The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 19-26.
[2]	JIANG Tao , WANG Quan-ming , HE Kai-hui , WU Shu-qin . 3D collaborative design for ITER project [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 6-11.
[3]	ZENG Hao , FENG Kun , LIU Li-juan , BAI Xin-yu , WANG Chao , CHENG Ya-li , LIANG Jun , LU Bo. Optimal design of the microwave exciter for LHCD system [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 68-74.
[4]	ZHANG Biao, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and test of superconducting joint for ITER calibration field magnet [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 206-206.
[5]	YIN Zhong-hui, MA Qiang, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and pressure drop experiment of helium tube for ITER bottom correction coils [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 210-215.
[6]	ZHOU Run-hui, CAO Hong-rui, , ZHAO Jing-long, LIU Shi-xing, ZHANG Wei, LI Qiang, CHEN Kai-yun, YU Hong, HU Li-qun. Research on soft X-ray camera signal self-test using laser diode [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 229-235.
[7]	WU Jing, CHEN Ji-ming, WANG Ping-huai, WANG Zheng-yu, KANG Wei-shan, GAO Hui. Thermal hydraulic analysis for ITER enhanced heat flux first wall of pipe joint assembly type [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 28-34.
[8]	KANG Dao-an, LI Peng-yuan, SUN Zhen-chao, ZHANG Teng, HAN Shi-lei, ZHAO Xiao-guang. Research of manufacturing technology of 316LN U-shaped clamp for ITER magnet supports [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 39-44.
[9]	WEI Hui-xiang, LI Ren-jie, LI Cheng, XU Zhuang, WANG Wen-shan. Preliminary design and analysis of coil terminal box of CFETR PF feeder system [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 51-55.
[10]	LU Yong, CAI Li-jun, HUANG Wen-yu, LIU Yu-xiang, LAI Chun-lin, LIU Jian, ZHANG Wei, LI Zai-xin . Structure design and process analysis of limiter system for the HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 351-354.
[11]	WANG Ze-hui, LIU Bai-qi, YANG Juan-cheng, CHEN Long, NI Ming-jiu. Spreading test platform and preliminary experiment of liquid lithium limiter [J]. Nuclear Fusion and Plasma Physics, 2021, 41(3): 264-269.
[12]	YANG Ya-long1, 2, 3, XU Qiang-lin1, 3, LIU Wei1, 3, GAO Ge2. Analysis on network topology delay of ITER PF power supply field layer monitoring system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 150-156.
[13]	ZHENG Yuan-yang, GU Yong-qi, YUAN Zhong, LIU Chen, WANG Jun, JIN Jing, HAN Hou-xiang. Study on the inspection of welding deformation in the development of ITER ELM coils [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 162-166.
[14]	HU Wan-peng, CAI Lai-zhong. Particle simulation of heat deposition on the ITER-like divertor tile surface [J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 16-20.
[15]	ZHAO Wei1, WANG Ya-li1, JIN Yu-zhong1, ZHAO Li1, ZHOU Hong-xia1, ZHONG Guang-wu1, NIE Lin1, LIU Chun-jia2. Preliminary design and development of ITER divertor Langmuir probe system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(4): 350-356.

Primary structure and seismic response analysis of the ITER transfer cask

ITER遥控运输车初步结构及抗震分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics