Electromagnetic and mechanical analysis of ITER TF superconducting busbar

NUCLEAR FUSION AND PLASMA PHYSICS ›› 2010, Vol. 30 ›› Issue (2): 152-156.

• Nuclear Fusion Engineering and Technology • Previous Articles Next Articles

Electromagnetic and mechanical analysis of ITER TF superconducting busbar

WANG Zhi-bin,SONG Yun-tao,WANG Zhong-wei,LI Chang-chun,JI Xiang

(Institute of Plasma physics, Chinese Academy of Sciences, Hefei 230031)

Received:2009-10-20 Revised:2010-01-25 Online:2010-06-15 Published:2010-06-03

ITER纵场磁体超导母线电磁结构分析

王志滨，宋云涛，王忠伟，李长春，戢翔

(中国科学院等离子体物理研究所，合肥 230031)

作者简介:王志滨(1985-)，男，山东省聊城市，硕士研究生，主要从事电物理装置结构设计与分析。
基金资助:
国家重点基础研究发展计划(973计划)项目(2008CB717900)；ITER计划专项支持项目(2008GB102000)

Abstract

Abstract: The structure of ITER TF superconducting busbar was introduced. The electromagnetic and mechanical analysis of busbar under operating conditions was performed by means of finite element method, and then the stress and deformation of busbar was checked. The analysis results proved that the structural of busbar and its supports was reliable and safe.

Key words: ITER, Busbar, Supports, Electromagnetic and mechanical analysis

摘要： 阐述了ITER纵场磁体超导母线及其支撑结构设计。运用有限元算法，对工作状态下的超导母线进行电磁结构耦合分析，并对超导母线的应力及变形进行校核，从而验证了纵场磁体超导母线及其支撑结构的安全可靠性，为进一步的详细设计提供了依据。

关键词: ITER, 超导母线, 支撑, 电磁结构耦合分析

CLC Number:

TL62⁺2

WANG Zhi-bin,SONG Yun-tao,WANG Zhong-wei,LI Chang-chun,JI Xiang. Electromagnetic and mechanical analysis of ITER TF superconducting busbar[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2010, 30(2): 152-156.

王志滨，宋云涛，王忠伟，李长春，戢翔. ITER纵场磁体超导母线电磁结构分析[J]. 核聚变与等离子体物理, 2010, 30(2): 152-156.

[1]	GU Yong-qi, ZHENG Yuan-yang, YUAN Zhong, WANG Lin, DENG Lei, LI Zhi-hu, ITER TAC Project Consortium Team. The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting [J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 19-26.
[2]	JIANG Tao , WANG Quan-ming , HE Kai-hui , WU Shu-qin . 3D collaborative design for ITER project [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 6-11.
[3]	ZENG Hao , FENG Kun , LIU Li-juan , BAI Xin-yu , WANG Chao , CHENG Ya-li , LIANG Jun , LU Bo. Optimal design of the microwave exciter for LHCD system [J]. Nuclear Fusion and Plasma Physics, 2023, 43(1): 68-74.
[4]	HOU Bing-lin, LAI Xiao-qiang, XU Wan-yun, WEI Hai-hong . Preliminary concept design of the magnet supports for CFETR [J]. Nuclear Fusion and Plasma Physics, 2022, 42(4): 399-403.
[5]	ZHANG Biao, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and test of superconducting joint for ITER calibration field magnet [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 206-206.
[6]	YIN Zhong-hui, MA Qiang, ZHENG Jin-xing, WANG Lin, LU Kun, WEI Jing. Design and pressure drop experiment of helium tube for ITER bottom correction coils [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 210-215.
[7]	ZHOU Run-hui, CAO Hong-rui, , ZHAO Jing-long, LIU Shi-xing, ZHANG Wei, LI Qiang, CHEN Kai-yun, YU Hong, HU Li-qun. Research on soft X-ray camera signal self-test using laser diode [J]. Nuclear Fusion and Plasma Physics, 2022, 42(2): 229-235.
[8]	WU Jing, CHEN Ji-ming, WANG Ping-huai, WANG Zheng-yu, KANG Wei-shan, GAO Hui. Thermal hydraulic analysis for ITER enhanced heat flux first wall of pipe joint assembly type [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 28-34.
[9]	KANG Dao-an, LI Peng-yuan, SUN Zhen-chao, ZHANG Teng, HAN Shi-lei, ZHAO Xiao-guang. Research of manufacturing technology of 316LN U-shaped clamp for ITER magnet supports [J]. Nuclear Fusion and Plasma Physics, 2022, 42(1): 39-44.
[10]	LU Yong, CAI Li-jun, HUANG Wen-yu, LIU Yu-xiang, LAI Chun-lin, LIU Jian, ZHANG Wei, LI Zai-xin . Structure design and process analysis of limiter system for the HL-2M tokamak [J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 351-354.
[11]	WANG Ze-hui, LIU Bai-qi, YANG Juan-cheng, CHEN Long, NI Ming-jiu. Spreading test platform and preliminary experiment of liquid lithium limiter [J]. Nuclear Fusion and Plasma Physics, 2021, 41(3): 264-269.
[12]	YANG Ya-long1, 2, 3, XU Qiang-lin1, 3, LIU Wei1, 3, GAO Ge2. Analysis on network topology delay of ITER PF power supply field layer monitoring system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 150-156.
[13]	ZHENG Yuan-yang, GU Yong-qi, YUAN Zhong, LIU Chen, WANG Jun, JIN Jing, HAN Hou-xiang. Study on the inspection of welding deformation in the development of ITER ELM coils [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 162-166.
[14]	HU Wan-peng, CAI Lai-zhong. Particle simulation of heat deposition on the ITER-like divertor tile surface [J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 16-20.
[15]	ZHAO Wei1, WANG Ya-li1, JIN Yu-zhong1, ZHAO Li1, ZHOU Hong-xia1, ZHONG Guang-wu1, NIE Lin1, LIU Chun-jia2. Preliminary design and development of ITER divertor Langmuir probe system [J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(4): 350-356.

Electromagnetic and mechanical analysis of ITER TF superconducting busbar

ITER纵场磁体超导母线电磁结构分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics