[1] |
XU Jie, CAI Li-jun, LIU Jian, LU Yong, ZHANG Long, LIU Kuan-cheng, HUANG Wen-yu, LIU Yu-xiang, LUO Shan.
Development of the HL-3 first wall temperature monitoring system
[J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 58-63.
|
[2] |
YANG Xian-ke, , YIN Lei, YAO Da-mao.
Design and analysis of the first wall on the NBI shine-through area of high magnetic field side of EAST
[J]. Nuclear Fusion and Plasma Physics, 2024, 44(4): 450-455.
|
[3] |
TANG Le, CAI Li-jun, LU Yong, YUAN Ying-long, HOU Ji-lai, ZHANG Long, LIU Kuan-cheng, LAI Chun-lin .
Analysis of the seismic response spectrum
of the HL-3 carbon-based first wall
[J]. Nuclear Fusion and Plasma Physics, 2024, 44(3): 262-266.
|
[4] |
YANG Yu-xiang, WANG Zi-jing, LEI Ming-zhun.
Research on heat transfer enhancement by inserting twisted band
in the first wall of the helium cooled ceramic breeder blanket
[J]. Nuclear Fusion and Plasma Physics, 2024, 44(3): 312-317.
|
[5] |
TANG Le, CAI Li-jun, LU Yong, YUAN Ying-long, HOU Ji-lai, ZHANG Long, LIU Kuan-cheng, LAI Chun-lin .
Preload analysis of screw bolt joints on the HL-3 carbon-based first
wall
[J]. Nuclear Fusion and Plasma Physics, 2024, 44(2): 177-182.
|
[6] |
YU Yi, , MA Xue-bin , JIANG Ke-cheng , WU Qiu-ran, , CHEN Lei , LIU Song-lin.
Thermal-hydraulic analysis of the first wall of the supercritical CO2 cooled lithium lead blanket for CFETR
[J]. Nuclear Fusion and Plasma Physics, 2023, 43(4): 386-391.
|
[7] |
WEI Ming-yu , WANG Jian-bao , Jitendar Kumar , QIANG Jian-bing , WANG Ying-ming , LIU Tian-zhi , FENG Fan , LIAN You-yun , LIU Xiang.
Fe-based amorphous filler alloys for brazing tungsten and low-activation
steels and the joint microstructures
[J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 132-139.
|
[8] |
WANG Bao-guo, , ZHU Da-huan , DING Rui , MU Lei , LI Chang-jun , CHEN Jun-ling.
Experimental study of arc induced on tungsten surface
in the EAST edge plasma
[J]. Nuclear Fusion and Plasma Physics, 2023, 43(2): 156-160.
|
[9] |
REN Qing-hua, LI Wei-bin, WANG Ya-li, WANG Ying-qiao, CHEN Yu-hong, HAN Ai-bo, WU Yi, ZHENG Xue .
Design of real-time control system of magnetic field power supply for HL-2M first plasma discharge
[J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 472-476.
|
[10] |
LI Bo, SONG Xian-ming, ZHOU Jian, SONG Xiao, JI Xiao-quan, XIA Fan, ZHANG Jin-hua, ZHENG Guo-yao, HL-M Development Team.
Preliminary research of HL-2M tokamak operation and control techniques
[J]. Nuclear Fusion and Plasma Physics, 2021, 41(s2): 579-584.
|
[11] |
HUANG Wen-yu , LI Lian-cai, CAI Li-Jun, LIU Yu-xiang, LAI Chun-lin, LIU Xiao-yu, LIU Kuan-cheng, SONG Bin-bin, HL-M Development Team .
Study of installation for the first wall of HL-2M first plasma
[J]. Nuclear Fusion and Plasma Physics, 2021, 41(s1): 346-350.
|
[12] |
ZHAO Bao-ling 1, CHEN Ji-ming 2, WU Jing2, KANG Wei-shan2.
Study on thermal performance of Be/Cu joint of ITER first wall components under high heat flux
[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2021, 41(2): 157-161.
|
[13] |
LIU Jian, LAI Chun-lin, WANG Jin, LIN Tao, CAI Li-jun .
Design and performance test of thermal transfer structure of first wall on HL-2M tokamak
[J]. Nuclear Fusion and Plasma Physics, 2021, 41(1): 33-36.
|
[14] |
ZHOU Yi, CHEN Ji-ming, WANG Ping-huai, DAN Min, JIN Fan-ya.
Tribological property of pulsed magnetron sputtering MoS2-Ti coating at room and elevated temperatures in vacuum
[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 135-141.
|
[15] |
WU Jing, WANG Ping-huai, CHEN Ji-ming, YUAN Tao,ZHU Xiao-bo, LI Qian, GAO Hui, KANG Wei-shan.
Preliminary design of pipe joint assembly type ITER enhanced heat load first wall
[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 65-71.
|