Welcome to Nuclear Fusion and Plasma Physics, Today is Share:

Nuclear Fusion and Plasma Physics ›› 2024, Vol. 44 ›› Issue (3): 304-311.DOI: 10.16568/j.0254-6086.202403009

• Nuclear Fusion Engineering • Previous Articles     Next Articles

Development of high current and refrequency pulse supply power system for compact torus core fueling device 

LI Yun-hai1 , YE Yang2 , TANG Liang-hao2, 3, TAN Ming-sheng2 , TONG Yi1 , YANG Rong1 , XIE Xiao-feng1 , DENG Tian-bai3 , KONG De-feng2 , TAO Jun3   

  1. (1. Hefei Proton Dance Technology Co., LTD, Hefei 230088; 2. Institute of Energy, Hefei Comprehensive National Science Center, Hefei, 230031; 3. School of Electrical Engineering and Automation, Anhui University, Hefei, 230601)
  • Received:2023-02-21 Revised:2023-11-10 Online:2024-09-15 Published:2024-09-13

紧凑环芯部加料装置用大电流高重频脉冲电源系统的研制

李运海 1 ,叶 扬2 ,唐良浩 2, 3,谭名昇 2 ,童 义 1 , 杨 荣 1 ,谢晓峰 1 ,邓天白 3 ,孔德峰 2 ,陶 骏 3   

  1. (1. 合肥质子跃动科技有限公司,合肥 230088; 2. 合肥综合性国家科学中心能源研究院,合肥 230031; 3. 安徽大学电气工程与自动化学院,合肥 230601)
  • 作者简介:李运海(1982-), 男,安徽合肥人,学士,高级工程师,从事高功率脉冲电源技术研究。
  • 基金资助:
    国家自然科学基金(11905143);中国科学院合肥大科学中心“高端用户培育基金”(2020HSC-UE008);安徽高校协同创新项目(GXXT-2021-014,GXXT-2021-029) 

Abstract: Compact torus injection (CTI) technology is an effective means to realize core fueling in fusion device. A set of high current and repetition rate pulse power supply system is designed to realize the CTI. By deducing the lumped parameter calculation formula of the equivalent RLC second-order discharge circuit, the calculation formula of key parameters such as the peak value of discharge current and half wave period is obtained, and the basic parameters of the four-way pulse power supply are designed. The parameters are modeled and simulated, and the simulation waveform and the result parameters are given. The key discharge switch components are analyzed and selected, and the low-inductive installation structure of power supply is designed The discharge test of the power supply was carried out on the full-superconducting tokamak-compact torus injection device (EAST-CTI). The remote control software was used to flexibly set parameters and control the working time sequence of the power supply. The actual discharge waveform and output current parameters were in good agreement with the theoretical calculation and simulation. The peak current of the power supply exceeds 300kA and the repetition rate is 2Hz, which indicates that the designed power supply system can be effectively applied to the CTI device and has good engineering practical value. 

Key words: Compact torus injection device, High voltage pulse power supply, Ignitron, Core fueling technology

摘要: 紧凑环注入(CTI)技术是聚变装置实现堆芯加料的有效手段,为实现 CTI 设计了一套大电流、高重复频率脉冲电源系统。对等效后的 RLC 二阶放电电路进行集总参数计算公式推导,得出了放电电流峰值、半波周期等关键参数的计算公式,并设计了四路脉冲电源的基本参数;进一步进行了参数建模仿真,给出仿真波形和结果参数。对关键的放电开关器件进行分析选型,并设计电源低感安装结构。在全超导托卡马克紧凑环注入装置(EAST-CTI)上对电源进行了放电测试,通过远 程控制软件灵活设置参数和控制电源的工作时序,实际放电波形、输出电流参数与理论计算和仿真吻合性好。电源系统的峰值电流超过 300kA,重复频率为 2Hz,这表明所设计的电源系统可以有效地应用于紧凑环注入装置,并具有良好的工程实用价值。 

关键词: 紧凑环注入装置, 高压脉冲电源, 引燃管, 芯部加料技术

CLC Number: