|
[1] 周张健, 钟志宏, 沈卫平, 等. 聚变堆中面向等离子体
材料的研究进展 [J]. 材料导报, 2005, 4(12): 5.
[2] Li M Y, Werner E, You J H, et al. Low cycle fatigue
behavior of ITER-like divertor target under
DEMO-relevant operation conditions [J]. Fusion
Engineering and Design, 2015, 90: 88.
[3] Mao X, Fursdon M, Chang X B, et al. Exploring the
engineering limit of heat flux of a W/RAFM divertor
target for fusion reactor [J]. Nuclear Fusion, 2018, 58(6):
066014.
[4] Lu K, Liu P, Qian X, et al. Fatigue and fracture analysis
on EAST divertor monoblock heat sink in H-mode
operation [J]. Fusion Engineering and Design, 2018, 137:
30.
[5] Peng L, Song Y, Lu K, et al. Study on creep fatigue of
heat sink in W/RAFM divertor for CFETR [J]. Fusion
Engineering and Design, 2018, 137: 390.
[6] Pitts R A, Carpentier S, Escourbiac F, et al. A full
tungsten divertor for ITER: physics issues and design
status [J]. Journal of Nuclear Materials, 2013, 438: S48.
[7] Song Y T, Wu S T, Li J G, et al. Concept design of
CFETR tokamak machine [J]. IEEE Transactions on
Plasma Science, 2014, 42(3): 503.
[8] Wan Baonian, Ding Siye, Qian Jinping, et al. Physics
design of CFETR: determination of the device
engineering parameters [J]. IEEE Transactions on Plasma
Science, 2014, 42(3): 495.
[9] Feltham P. Stress relaxation in copper and alpha-brasses
at low temperatures [J]. J. Inst. Met., 1960, 89: 210.
[10] Muroga T, Gasparotto M, Zinkle S J. Overview of
materials research for fusion reactors [J]. Fusion
Engineering and Design, 2002, 61: 13.
[11] Huang Q. Status and strategy of fusion materials
development in China [J]. Journal of Nuclear Materials,
2008, 386−388: 400.
[12] Zinkle S J. Fusion materials science: overview of
challenges and recent progress. [J]. Physics of Plasmas,
2005, 12(5): 58101.
[13] 雷玉成, 刘丹, 姚奕强, 等. 调质处理对CLAM钢焊缝
抗辐照性能的影响 [J]. 焊接学报, 41(7): 8.
[14] Marmy P, Kruml T. Low cycle fatigue of Eurofer 97 [J].
Journal of Nuclear Materials, 2008, 377(1): 52.
[15] Aktaa J, Schmitt R. High temperature deformation and
damage behavior of RAFM steels under low cycle fatigue
loading: experiments and modeling [J]. Fusion
Engineering and Design, 2006, 81(19): 2221.
[16] 李勇, 许鹤君, 巴发海. 蠕变强度外推数据处理的
EXCEL 方法 [J]. 物理测试, 2018, 36(5): 19.
[17] 赵永强. 聚变堆第一壁热/结构耦合力学行为与热疲劳
性能数值模拟 [D]. 合肥: 中国科学技术大学, 2015.
[18] Qin S, Yao D, Wang Q, et al. Preliminary design progress
of the CFETR water-cooled divertor [J]. IEEE
Transactions on Plasma Science, 2020, 48(6): 1733.
[19] ITER technical document, Appendix A, Materials Design
Limit Data, SDC-IC [R]. ITER_D_222RLN v3. 3, 2013.
[20] Fursdon M, You J-H, Barrett T, et al. A hybrid analysis
procedure enabling elastic design rule assessment of
monoblock-type divertor components [J]. Fusion
Engineering and Design, 2018, 135(PT. A): 154.
[21] Parik P. Stress relaxation testing [M]. ASTM, 1979.
[22] Maringer E R. Dimensional instability [M]. UK:
Pergamon Press, 1977.
|
