Welcome to Nuclear Fusion and Plasma Physics, Today is Share:

Nuclear Fusion and Plasma Physics ›› 2021, Vol. 41 ›› Issue (s1): 415-419.DOI: 10.16568/j.0254-6086.2021s1025

Previous Articles     Next Articles

Design of the toroidal field coil preloading system on HL-2M tokamak

LIN Tao, LIU De-quan, CAI Li-jun, LI Qiang, QIAO Tao    

  1. (Southwestern Institute of Physics, Chengdu 610041) 

     
  • Received:2021-04-15 Revised:2021-07-14 Online:2021-10-15 Published:2021-11-23

HL-2M 环向场线圈预紧系统设计

林  涛,刘德权,蔡立君,李  强,乔  涛   

  1. (核工业西南物理研究院,成都 610041) 
  • 作者简介:林涛(1982−),男,四川内江人,博士,高级工程师,从事 HL-2M 装置主机支撑结构研制。

Abstract: According to the detachable toroidal field (TF) coil structure of HL-2M tokamak, horizontal 
preloading mechanism is adopted to preload the TF coil at the upper and lower ends of the "D" shaped coil. When 
the TF coil carries large current and endures large electromagnetic force, the preload and prestress of TF coil 
connecting bolts can ensure that the connection surface does not separate. Due to the requirements of 
synchronization and consistency, the system adopts hydraulic synchronous lifting mechanism, and uses pressure 
sensor to monitor the preload value in real time. The system ensures the safety of TF coil in the whole discharge 
experiment stage and provides the overall safety of HL-2M tokamak. 

Key words: Toroidal field coil, Hydraulic preloading, Pressure sensor, Support structure, HL-2M tokamak 

摘要: 针对 HL-2M 装置可拆卸的环向场(TF)线圈结构,在“D”形 TF 线圈外侧上、下两端分别采用水平的预紧机构对 TF 线圈实施预紧,使 TF 线圈在大电流承受较大电磁力的情况下,与 TF 线圈连接螺栓的预应力一起保证连接面不发生分离。由于同步性和一致性的要求,该系统采用液压同步顶升机构,并且采用压力传感器实时检测该预应力值,保证 TF 线圈在整个放电实验阶段的安全,为 HL-2M 装置整体的安全提供保障。

关键词: 环向场线圈;液压预紧;压力传感器;HL-2M 主机支撑结构 

CLC Number: