欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2006, Vol. 26 ›› Issue (2): 151-155.

• 研究报告 • 上一篇    下一篇

中性束诊断电源系统及束流引出实验研究

张 健1,刘保华1,胡立群1,杜少武2,HT-7DNB组1   

  1. (1.中国科学院等离子体物理研究所,合肥 230031;2.合肥工业大学能源研究所,合肥 230009)
  • 收稿日期:2005-10-21 修回日期:2006-02-25 出版日期:2006-06-15 发布日期:2012-01-21
  • 作者简介:张健(1979-),男,汉,安徽省芜湖市人,博士研究生,核能科学与工程专业,现主要从事DNB电源及控制系统的研究工作。

Power system for diagnostic neutral beam and study on the experiment of neutral beam extraction

ZHANG Jian1, LIU Bao-hua1, HU Li-qun 1,DU Shao-wu2,HT-7 DNB Group1   

  1. (1.Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031; 2.Energy Research Institute, Hefei University of Technology, Hefei 230009)
  • Received:2005-10-21 Revised:2006-02-25 Online:2006-06-15 Published:2012-01-21

摘要:

HT-7中性束诊断电源系统的计算机控制系统由PLC、工控机、逻辑控制和定时单元等组成。对起弧、束流引出等实验进行了研究。在多种参数下,通过调节弧压、进气量等观察了其对弧流的影响。初步实验结果表明,在高压35kV、弧流80A的情况下,束电流可以达到3.6A,引出的中性束流功率可以稳定地达到50kW以上。

关键词: 中性束诊断, 电源系统, HT-7

Abstract:

Control system of power supply for HT-7 diagnostic neutral beam source was composed of PLC, timer and master control logic. The experimental results show the good facility and reliability. The arcing and beam extraction are studied experimentally. The influences on the beam current are observed by adjusting arc voltage and gas injection at different cases. The neutral beam power of 50kW and beam current about 3.6A were obtained in this operation priod with 35kV HV and 80A arc current.

Key words: Diagnostic Neutral Beam, Power Supply System, HT-7

中图分类号: