|
[1]
冯开明. 可控核聚变与国际热核实验堆 (ITER) 计划 [J]. 中国核电, 2009,
2(3): 212-219.
[2]
Norajitra
P. Divertor development for a future fusion power plant [M]. KIT Scientific
Publishing, 2014.
[3]
Wang
P H, Chen J M, Fu H Y, et al. Technical issues for the fabrication of a
CN-HCCB-TBM based on RAFM steel CLF-1 [J]. Plasma Science and Technology, 2013,
15(2): 133-136.
[4]
张建武, 彭学兵, 卯鑫, 等. W/RAFM钢偏滤器靶板的结构分析与寿命预测 [J]. 核聚变与等离子体物理, 2018, 38(4): 452-458.
[5]
王琦杰, 曹启祥, 赵周, 等. 中国氦冷固态增殖剂试验包层模块第一壁的改进设计与分析 [J].
核聚变与等离子体物理, 2014, 34(3): 230-234.
[6]
Basuki
W W, Aktaa J, et al.
Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer [J].
Fusion Engineering and Design, 2011, 86(9-11): 2585-2588.
[7]
Cai
Q S, liu W S, Ma Y Z, et al. Microstructure, residual stresses and mechanical
properties of diffusion bonded tungsten–steel joint using a V/Cu composite
barrier interlayer [J]. International Journal of Refractory Metals and Hard
Materials, 2015, 48: 312-317.
[8]
Kalin
B A, Fedotov V T, Sevrjukov O N, et al. Development of brazing foils to join
monocrystalline tungsten alloys with ODS-EUROFER steel [J]. Journal of Nuclear Materials,
2007, 367: 1218-1222.
[9]
刘天鸷. 钨/低活化钢连接用Fe基非晶钎料研究 [D]. 大连: 大连理工大学, 2018.
[10] Wang J B, Lian Y Y, Feng F, et al. Microstructure of the
tungsten and reduced activation ferritic-martensitic steel joint brazed with an
Fe-based amorphous alloy [J]. Fusion Engineering and Design, 2019, 138:164-169.
[11] 耿遥祥. Fe-B-Si系非晶/纳米晶合金的成分设计及性能研究 [D]. 大连: 大连理工大学, 2015, 44-50.
[12] Leithe-Jasper A, Klesnar H, Rogl P, et al. Reinvestigation of
isothermal sections in M(M=Mo, W)-Fe-B ternary systems at 1323 K
[J]. Journal of the Japan Institute of Metals (Japan), 2000, 64(2): 154-162.
[13]
张启运, 庄鸿寿. 钎焊手册 [M]. 北京: 机械工业出版社, 1999.
|
