ITER PF6大型超导磁体线圈吊装精密准直测量关键技术

doi:10.16568/j.0254-6086.202501004

核工业西南物理研究院 ›› 2025, Vol. 45 ›› Issue (1): 19-26.DOI: 10.16568/j.0254-6086.202501004

ITER PF6大型超导磁体线圈吊装精密准直测量关键技术

顾永奇1，郑元阳1，袁忠1，王琳1，邓磊2，李志虎2，ITER TAC1项目联合体团队

(1. 中国科学院等离子体物理研究所，合肥 230031； 2. 中国核工业二三建设有限公司，北京 101300)

收稿日期:2022-06-21 修回日期:2024-09-10 出版日期:2025-03-15 发布日期:2025-03-15
作者简介:顾永奇(1986-)，男，河南周口人，博士研究生，高级工程师，主要从事精密准直测量定位技术研究。
基金资助:
中国科学院项目(O75ETY9)

The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting

GU Yong-qi1, ZHENG Yuan-yang1, YUAN Zhong1, WANG Lin1, DENG Lei2, LI Zhi-hu2, ITER TAC1 Project Consortium Team

(1. Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031; 2. China Nuclear Industry 23 Construction CO., LTD, Beijing 101300)

Received:2022-06-21 Revised:2024-09-10 Online:2025-03-15 Published:2025-03-15

摘要/Abstract

摘要：

PF6超导磁体线圈是ITER装置上首个吊装且重量最重的磁体线圈，其吊装精度直接影响后续部件的安装。根据ITER总装厂房和装置大厅的结构状况、基准分布和通视条件等，通过对线圈吊具负载变形测试、吊装测试、线圈方位调整、吊装路径、最终定位等阶段的准直测量过程进行的模拟测量分析，简化了测量方案，优化了准直测量关键步骤，保证了ITER TAC1项目进度。实现了PF6线圈一次性吊装落位精度±4mm的要求，经评估测量不确定度为0.66mm，满足ITER公差与测量不确定度比值不小于5的准则要求。

关键词: ITER PF6线圈, 精密吊装, 准直测量, 测量模拟分析

Abstract:

The PF6 superconducting magnet coil is the first lifting and the heaviest magnet coil on ITER, so the lifting accuracy will directly affect the installation of subsequent components. According to the structure status, fiducial distribution and visual conditions of ITER assembly workshop and Tokamak Hall, the simulation measurement analysis was carried out through the load deformation test, lifting trial, coil orientation adjustment, lifting path and precise positioning, therefore the measurement scheme was simplified and the key steps of alignment and metrology were optimized to ensure the progress of ITER TAC1 project. The one-time accurate lifting and landing position of PF6 coil meets the requirement of ±4mm, the measurement uncertainty is 0.66mm, and the ratio of the tolerance and the measurement uncertainty is not less than 5, which meets the ITER standard requirements.

Key words: ITER PF6 coil, Precision lifting, Alignment and metrology, Simulation and analysis of measurement

中图分类号:

TL62+6

顾永奇, 郑元阳, 袁忠, 王琳, 邓磊, 李志虎, ITER TAC项目联合体团队. ITER PF6大型超导磁体线圈吊装精密准直测量关键技术[J]. 核工业西南物理研究院, 2025, 45(1): 19-26.

GU Yong-qi, ZHENG Yuan-yang, YUAN Zhong, WANG Lin, DENG Lei, LI Zhi-hu, ITER TAC Project Consortium Team.

The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting

[J]. Nuclear Fusion and Plasma Physics, 2025, 45(1): 19-26.

ITER PF6大型超导磁体线圈吊装精密准直测量关键技术

The key alignment and metrology technology during ITER PF6 large superconducting magnet coil lifting

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics