欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2019, Vol. 39 ›› Issue (4): 352-358.DOI: 10.16568/j.0254-6086.201904011

• 核聚变工程技术 • 上一篇    下一篇

氦气实验回路HeCEL-3 概念设计的初步系统分析

王小勇,王晓宇,叶兴福,赵政宁,刘 洁,颜永江   

  1. (核工业西南物理研究院,成都610041)
  • 出版日期:2019-12-15 发布日期:2019-12-16
  • 作者简介:王小勇(1988-),男,四川达州人,硕士,助理研究员,从事氦冷系统设计与分析研究。
  • 基金资助:

    国家重点研发计划(2017YFE0300603,2017YFE0300503)

Preliminary system study on conceptual design of HeCEL-3 helium experimental loop

WANG Xiao-yong, WANG Xiao-yu, YE Xing-fu,ZHAO Zheng-ning, LIU Jie, YAN Yong-jiang   

  1. (Southwestern Institute of Physics, Chengdu 610041)
  • Online:2019-12-15 Published:2019-12-16

摘要:

利用大型系统与安全分析软件APROS 对氦冷实验回路(HeCEL-3)进行了包括稳态和瞬态的工况分析,不仅给出了回路设备参数的选取参考值、回路热工参数的分布,而且给出了回路瞬态运行的主要参数变化,为回路的设计和进一步设备调研提供了数据参考。同时,其分析过程和结果对中国聚变工程实验堆(CFETR)和未来聚变堆冷却回路的设计也有一定的借鉴意义。

关键词: 氦气实验回路, 系统分析, 加热器, 回热器, 风机

Abstract:

Various operating conditions of the HeCEL-3 helium coolant experimental loop, including steady state and transient state scenarios, have been simulated using large-scale system and safety analysis software APROS. The results not only provide reference values for the equipment parameters and the ranges of the thermal hydraulic parameter, but also give the changes of main parameters during transient operation. These provide a comprehensive reference data for the preliminary design of the loop. Meanwhile, the analysis results also can provide references for the design of cooling system of China fusion engineering test reactor (CFETR) and future nuclear fusion reactor.

Key words: Helium coolant experimental loop, System analysis, Heater, Recuperator, Circulator

中图分类号: