欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2015, Vol. 35 ›› Issue (4): 346-349.DOI: 10.16568/j.0254-6086.201504010

• 核聚变工程技术 • 上一篇    下一篇

大功率RF 离子源阻抗匹配电路的设计与实现

岳海昆1, 2,李 冬*2,刘开锋2,李小飞2,汪辰热2,陈德智2   

  1. (1. 华中科技大学电子信息与通信学院,武汉 430074;2. 华中科技大学强电磁工程与新技术国家重点实验室,武汉 430074)
  • 出版日期:2015-12-15 发布日期:2015-12-15
  • 作者简介:岳海昆(1987-),男,河南驻马店市人,博士研究生,主要从事电磁场计算和大功率匹配电路的研究。
  • 基金资助:

    国家磁约束核聚变能发展研究专项(2011GB113003)

Design and implementation of the matching unit for a high-power RF based ion source

YUE Hai-kun1, 2, LI Dong2, LIU Kai-feng2, LI Xiao-fei2, WANG Chen-re2, CHEN De-zhi2   

  1. (1. School of Electronic Information and Communications, Huazhong University of Science and Technology, Wuhan 430074; 2. State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan 430074)
  • Online:2015-12-15 Published:2015-12-15

摘要:

在大功率RF 离子源中,激励器的作用是产生等离子体,阻抗匹配电路是激励器吸收RF 功率的关键。将激励器等效阻抗视为一个电阻和一个电感的串联,采用了一种由一个RF 变压器并和两个可调电容组成的阻抗匹配电路,给出了视RF 变压器为理想变压器时阻抗匹配电路的分析模型,推导了阻抗匹配时两个可调电容的电气参数。当激励器实验装置使用一个石英玻璃激励器时,搭建了一个阻抗匹配电路,成功地将RF 功率耦合进激励器并产生了等离子体。

关键词: RF 离子源, 阻抗匹配电路, RF 变压器

Abstract:

For a RF ion source test facility, the driver is used to produce plasma, and the matching unit is the key for the driver to absorb RF power. The driver’s impedance could be equivalent to a resistance and an inductance in series. A matching unit which consisted of an RF transformer and two variable capacitances was chosen, it was analyzed by an ideal transformer model and its electrical parameters were derived under the condition of matching. When a quartz glass driver was mounted onto the test facility at HUST, a matching unit was implemented, it transmitted RF power into the driver and then plasma was successfully produced.

Key words: High-power RF based ion source, Matching unit, RF transformer

中图分类号: