欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2011, Vol. 31 ›› Issue (1): 48-52.

• 核聚变工程技术 • 上一篇    下一篇

HL-2A装置低杂波天线TE10模过渡段设计

曾 浩,白兴宇,陈罡宇   

  1. (核工业西南物理研究院,成都 610041)
  • 收稿日期:2010-07-01 修回日期:2010-09-07 出版日期:2011-03-15 发布日期:2011-03-03
  • 作者简介:曾浩(1973-),男,四川成都人,硕士,高级工程师,主要从事低杂波电流驱动方面的工作。

Design of TE10 taper in the LHCD antenna for HL-2A tokamak

ZENG Hao, BAI Xing-yu, CHEN Gang-yu   

  1. (Southwestern Institute of Physics, Chengdu 610064)
  • Received:2010-07-01 Revised:2010-09-07 Online:2011-03-15 Published:2011-03-03

摘要:

介绍了3-dB功率分配器、模式转化器、耦合器、水负载等常规波导器件发展为单元模块集成部件的基于PAM概念的新一代低杂波天线,利用耦合模理论分析设计了TE10模过渡段的结构参数,使用高频电磁场仿真软件HFSS进行结构仿真和参数优化,得到了过渡段长度为370mm,驻波比为1.0012、反射损耗为-65.81dB的结果。

关键词: TE10模过渡段, 低杂波电流驱动系统, 耦合模方程, HFSS优化仿真

Abstract:

Based on PAM, the 3-dB power splitter, the mode converter, the coupler and the water load are developed into an integrated module. The coupled wave thoery is used to design the TE10 taper.   The parameters is optimized with HFSS code. Finally the results are obtained, the length is 370mm;    the VSWR is 1.0012 and the reflection    loss  is -65.81dB

Key words: TE10 taper, Lower hybrid current drive, Coupled wave thoery, HFSS simulation and optimization

中图分类号: