脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能

doi:10.16568/j.0254-6086.202002007

核聚变与等离子体物理 ›› 2020, Vol. 40 ›› Issue (2): 135-141.DOI: 10.16568/j.0254-6086.202002007

脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能

周毅，谌继明*，王平怀，但敏，金凡亚

(核工业西南物理研究院，成都 610041)

收稿日期:2019-02-01 修回日期:2019-12-28 出版日期:2020-06-15 发布日期:2020-06-15
作者简介:周毅(1988-)，男，四川达州人，硕士研究生，主要从事核能科学与工程研究。

Tribological property of pulsed magnetron sputtering MoS₂-Ti coating at room and elevated temperatures in vacuum

ZHOU Yi, CHEN Ji-ming, WANG Ping-huai, DAN Min, JIN Fan-ya

(Southwestern Institute of Physics, Chengdu 610041)

Received:2019-02-01 Revised:2019-12-28 Online:2020-06-15 Published:2020-06-15

摘要/Abstract

摘要：

利用脉冲磁控溅射法，以铝青铜合金(C63200)和硅片为基底，制作不同Ti含量的MoS₂-Ti复合涂层。通过XRD、SEM、EDS、光学显微镜、多环境摩擦试验机等表征了涂层的结构成分和摩擦性能。结果表明：随Ti含量的增加，涂层致密度提升，S、Mo原子比上升。Ti的掺入使涂层由高度结晶态向非晶态转变。Ti含量增加，涂层摩擦磨损性能先上升再下降，常温真空下含3%Ti的涂层拥有稳定和低至0.015的摩擦系数，23%Ti的涂层失去润滑性。温度升高到400℃，涂层摩擦系数由0.015~0.04上升至0.07~0.1，含13%Ti的涂层高温真空下在800s后润滑失效。磨痕形貌显示，含3%Ti的涂层磨痕最窄，温度升高宽度增加不大，含13%Ti的涂层磨损严重，400℃真空环境下很快磨穿，纯MoS₂和13%Ti涂层摩擦时发现大量磨粒和破碎磨屑。

关键词: 脉冲磁控溅射, MoS2-Ti, ITER第一壁, 低摩擦涂层, 高温真空, 摩擦磨损性能

Abstract:

MoS₂-Ti composite coatings were deposited by pulsed magnetron sputtering system on silicon wafers and aluminium bronze (C63200) substrates. Ti content was controlled by different current applied on Ti target. Morphology, composition, tribological properties and structure were respectively investigated by SEM, EDS, ball on disk tribometer and XRD. Results show that with increasing of Ti from 0% to 23%, the compactness of coatings increased gradually and structure were changed from high crystallinity of dominant orientation on basal panels (002) to amorphous forms. Friction and wear test showed that with increasing of Ti fraction, tribological properties were improved firstly and then degraded, 3%Ti coating has friction coefficient as low as 0.015 at room temperature in vacuum, while 23%Ti coating showed no lubrication. As elevated temperature to 400°C, higher friction coefficient and wider wear scar were brought about, even friction coefficient were increased from 0.015~0.04 to 0.07~0.1, 13%Ti coating damaged after 800s at 400°C in wear test. Wear debris and particles were observed on the friction pairs of pure MoS₂ and 13%Ti coating at 400°C.

Key words: Pulsed magnetron sputtering, MoS2-Ti, ITER first wall, Low friction coating, Elevated temperature vacuum, Tribological property

中图分类号:

TH117.1

周毅，谌继明*，王平怀，但敏，金凡亚. 脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能[J]. 核聚变与等离子体物理, 2020, 40(2): 135-141.

ZHOU Yi, CHEN Ji-ming, WANG Ping-huai, DAN Min, JIN Fan-ya. Tribological property of pulsed magnetron sputtering MoS₂-Ti coating at room and elevated temperatures in vacuum[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(2): 135-141.

参考文献

[1] 冯开明. 可控核聚变与国际热核实验堆(ITER)计划[J]. 中国核电, 2009, 2(3): 212-219.

[2] Spalvins T. Deposition of MoS₂ films by physical sputtering and their lubrication properties in vacuum[J]. ASLE Transactions, 1969, 12(1): 36-43.

[3] 周晖, 温庆平, 郝宏, 等. 非平衡磁控溅射沉积MoS2-Ti复合薄膜结构与磨擦摩损性能研究[J]. 摩擦学学报, 2006, 26(2): 183-187.

[4] 李浩, 李霞, 张广安, 等. 磁控溅射沉积抗氧化、长寿命二硫化钼基复合薄膜[J]. 摩擦学学报, 2016, 36(6): 708-716.

[5] Fox V C, Renevier N, Teer D G, et al. The structure of tribologically improved MoS₂ –metal composite coatings and their industrial applications[J]. Surface & Coatings Technology, 1999, s116–119(99): 492-497.

[6] Renevier N M, Fox V C, Teer D G, et al. Coating characteristics and tribological properties of sputter-deposited MoS₂/metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating[J]. Surface & Coatings Technology, 2000, 127(1): 24-37.

[7] Simmonds M C, Savan A, Swygenhoven H V, et al. Characterisation of magnetron sputter deposited MoS_x/metal multilayers[J]. Thin Solid Films, 1999, 354(1–2): 59-65.

[8] 罗蓉蓉, 但敏, 李鹏远, 等. 脉冲偏压对磁控溅射MoS_2固体润滑涂层性能影响[J]. 真空科学与技术学报, 2018, 38(3): 208-213.

[9] Zhang P, Fang Y , Dai S , et al. Preparation and characterization of MoS₂-TiL/MoS₂-TiH nano multilayer coating with excellent wear properties[J]. Materials Letters, 2016, 173: 35-38.

[10] Sing H, Mutyala K C, Evans R D, et al. An investigation of material and tribological properties of Sb₂O₃/Au-doped MoS₂ solid lubricant films under sliding and rolling contact in different environments [J]. Surface & Coatings Technology, 2015, 284.

[11] Li Hao, Zhang Guangan, Wang Liping. Low humidity-sensitivity of MoS₂/Pb nanocomposite coatings[J]. Wear, 2016, s350-351: 1-9.

[12] Strapasson G, Badin P C, Soares G V, et al. Structure, composition, and mechanical characterization of dc sputtered TiN-MoS₂ nanocomposite thin films[J]. Surface and Coatings Technology, 2011, 205(13-14): 3810-3815.

[13] Ding X Z, Zeng X T, He X Y, et al. Tribological properties of Cr- and Ti-doped MoS₂ composite coatings under different humidity atmosphere[J]. Surface & Coatings Technology, 2010, 205(1): 224-231.

[14] 胡志彪, 李贺军, 付前刚, 等. MoS₂-Ti复合膜的结构及其抗氧化性能[J]. 稀有金属材料与工程, 2006, 35(s1): 216-219.

脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能

Tribological property of pulsed magnetron sputtering MoS₂-Ti coating at room and elevated temperatures in vacuum

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能

Tribological property of pulsed magnetron sputtering MoS2-Ti coating at room and elevated temperatures in vacuum

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

Tribological property of pulsed magnetron sputtering MoS₂-Ti coating at room and elevated temperatures in vacuum