等离子体电磁加速器中快速电磁阀气体注入特性研究

doi:10.16568/j.0254-6086.202001014

核聚变与等离子体物理 ›› 2020, Vol. 40 ›› Issue (1): 85-89.DOI: 10.16568/j.0254-6086.202001014

等离子体电磁加速器中快速电磁阀气体注入特性研究

郭海山，杨兰均*，刘帅

(西安交通大学电力设备电气绝缘国家重点实验室，西安 710049)

收稿日期:2018-11-27 修回日期:2019-09-15 出版日期:2020-04-15 发布日期:2020-04-20
作者简介:郭海山(1993-)，男，福建莆田人，硕士研究生，从事脉冲功率与放电等离子体研究。

Study on gas injection characteristics of a fast electromagnetic valve in electromagnetic plasma accelerator

GUO Hai-shan, YANG Lan-jun, LIU Shuai

(State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049)

Received:2018-11-27 Revised:2019-09-15 Online:2020-04-15 Published:2020-04-20

摘要/Abstract

摘要：

在注气持续时间短、注入气体质量大的快速电磁阀测量中，采用高频响应压力传感器在电磁阀出口测量了气体的动态压力，通过真空室注气前后的压强差测量了注入气体的质量。研究表明，驱动电流、位移限定以及背景气压对气体注入特性有显著影响。当阀片受到的电磁力远大于背景气压造成的阻力时，增大驱动电流和增大背景气压都会加速流道口气体流动，提高气体注入量；电磁阀最高流速超过当地声速，流道应该设计成扩张式，且流道的长度要求尽可能短；电磁阀的注气持续时间主要由阀片的运动时间以及阀片关闭后气体在流道内扩散速率决定的。

关键词: 电磁阀, 气体注入, 流速, 持续时间

Abstract:

In the measurement of a fast solenoid valve with short injection duration and high gas mass injection, the gas stagnation pressure is measured at the outlet of the solenoid valve using a high frequency pressure sensor, and the injected gas mass is measured by the vacuum chamber pressure difference before and after the gas injection. Studies show that driving current, displacement limits, and background air pressure have a significant effect on gas injection characteristics. When the valve plate electromagnetic force is much larger than the resistance caused by the background air pressure, the increase of the driving current and the background air pressure accelerate the gas flow in the flow channel and increase the gas injection mass. When the maximum gas flow rate exceeds the local sound speed, the flow channel should be tapered, and the flow channel length should be as short as possible. The gas injection duration is mainly determined by the valve plate movement time and the gas diffusion rate in the flow channel after the valve closes.

Key words: Solenoid valve, Gas injection, Flow rate, Opening time

中图分类号:

TM89

郭海山，杨兰均*，刘帅. 等离子体电磁加速器中快速电磁阀气体注入特性研究[J]. 核聚变与等离子体物理, 2020, 40(1): 85-89.

GUO Hai-shan, YANG Lan-jun, LIU Shuai. Study on gas injection characteristics of a fast electromagnetic valve in electromagnetic plasma accelerator[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2020, 40(1): 85-89.

参考文献

[1] Poehlmann F R, Cappelli M A, Rieker G B. Current distribution measurements inside an electromagnetic plasma gun operated in a gas-puff mode[J]. Phys. Plasmas, 2010, 17(12): 123508.

[2] Rieker G B, Poehlmann F R, Cappelli M A. A thomson-type mass and energy spectrometer for characterizing ion energy distributions in a coaxial plasma gun operating in a gas-puff mode[J]. Phys. Plasmas, 2013, 20(7): 073115.

[3] Song Y, Coleman P, Failor B H, et al. Valve and nozzle design for injecting a shell-on-shell gas puff load into a z pinch[J]. Rev. Sci. Instrum., 2000, 71(8): 3080-3084.

[4] Milanese M M, Pouzo J O, Cortázar O D, et al. Fast valve and nozzle for gas-puff operation of dense plasma focus[J]. Rev. Sci. Instrum., 2006, 77(3): 036106.

[5] Hsu S C, Merritt E C, Moser A L, et al. Experimental characterization of rail gun-driven supersonic plasma jets motivated by high energy density physics applications[J]. Phys. Plasmas, 2012, 19(12): 123514.

[6] Shinton I. Development of a plasma gun for application in magnetized target fusion[D]. New Zealand: Massey University, Albany, 2005.

[7] Cheng D Y. Application of a deflagration plasma gun as a space propulsion thruster [J]. AIAA Journal, 1971, 9(9): 1681-1685.

[8] Vannucci A, Carlos T, Teixeira F S, et al. Fast opening gas valve for the TCABR pellet injector [J]. Brazilian Journal of Physics, 2004, 34(4B): 1752-1755.

[9] Krishnan M, Elliott K W, Geddes C, et al. Electromagnetically driven, fast opening and closing gas jet valve[J]. Physical Review Special Topics - Accelerators and Beams, 2011, 14(3): 033502.

[10] Loebner K, Underwood T C, Cappelli M A. A fast rise-rate, adjustable-mass-bit gas puff valve for energetic pulsed plasma experiments[J]. Rev. Sci. Instrum., 2015, 86(6): 063503.

[11] 吴成, 江德仪, 杨思泽. 高重复性脉冲电磁气阀(FMGV-2)[J]. 仪器仪表学报, 1990, 11(2): 115-121.

[12] Thomas J C, Hwang D Q, Horton R D, et al. A simple fast pulse gas valve using a dynamic pressure differential as the primary closing mechanism[J]. Rev. Sci. Instrum., 1993, 64(6): 1410-1413.

[13] Keyser C J, Dembinski M, John P K. Fast pulsed gas valve[J]. Rev. Sci. Instrum., 1980, 51(4): 425-426.

[14] 冯春华, 房同珍, 王龙, 等．等离子体驱动碎片加速器中脉冲充气电磁阀[J]. 核聚变与等离子体物理, 2011, 31(2): 181-185.

[15] 武瑾, 庄劲武, 王晨, 等. 电磁斥力机构数学模型的简化与求解[J]. 中国电机工程学报, 2013, 33(24): 175-182.

[16] 黄瑜珑, 张祖安, 温伟杰, 等. 高压直流断路器中电磁斥力快速驱动器研究[J]. 高电压技术, 2014, 40(10): 3171-3178.

[17] 杨浩, 吕玮, 刘彬, 等. 电磁斥力快速开关研究[J]. 高压电器, 2016, 52(3): 0147-0154.

等离子体电磁加速器中快速电磁阀气体注入特性研究

Study on gas injection characteristics of a fast electromagnetic valve in electromagnetic plasma accelerator

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

[1]	赵耀, 孙振超, 张秀杰, 潘传杰, 王磊. 钐钴永磁流量计研制与锂铅自然对流回路流速测量 [J]. 核工业西南物理研究院, 2024, 44(3): 323-327.
[2]	张泽力, 孙树伟, 陈佳尧, 钟方川. 气流和外加磁场对负电晕放电特性的影响[J]. 核工业西南物理研究院, 2023, 43(4): 477-481.
[3]	王凡, 张秀杰, 潘传杰. 高特征参数下绝缘圆管内液态金属 MHD 效应研究[J]. 核聚变与等离子体物理, 2023, 43(2): 175-179.
[4]	杨印, 江涛, 夏志伟. 托卡马克装置气体注入管线的结构分析与优化[J]. 核聚变与等离子体物理, 2023, 43(2): 185-190.
[5]	吴茗甫1, 2，文斐*2，向皓明1, 2，张涛2，刘子奚1，王嵎民2，李恭顺3, 4，耿康宁1, 2，钟富彬1, 2，叶凯萱1, 2，黄佳1, 2，韩翔2，张寿彪2，高翔1, 2. EAST装置上W波段多道极向相关反射仪的研制[J]. 核聚变与等离子体物理, 2020, 40(3): 241-247.
[6]	王俊，张国书，张龙 . 聚变示范堆气体注入系统氚渗透分析[J]. 核聚变与等离子体物理, 2014, 34(3): 240-246.
[7]	冯春华1，房同珍1，王龙1，杨宣宗1，黄建国2，陈朝峰2，韩建伟2，孙远程3. 等离子体驱动碎片加速器中脉冲充气电磁阀[J]. 核聚变与等离子体物理, 2011, 31(2): 181-185.
[8]	李连才, 周艳, 邓中朝, 易江, 李永高, 冯北滨. HL-2A装置上粒子输运的研究[J]. 核聚变与等离子体物理, 2009, 29(2): 116-120.
[9]	李益文1，李应红1，吴云1，梁华1，苏长兵1，刘立彬2. 等离子体气动激励器布局对放电特性与加速效果的影响[J]. 核聚变与等离子体物理, 2008, 28(2): 172-176.