HCCB-DEMO氦冷固态包层热工水力计算及分析

doi:10.16568/j.0254-6086.201701011

核聚变与等离子体物理 ›› 2017, Vol. 37 ›› Issue (1): 58-63.DOI: 10.16568/j.0254-6086.201701011

HCCB-DEMO氦冷固态包层热工水力计算及分析

王苏豪1, 2，曹启祥2，武兴华2，王晓宇2，张国书2，冯开明1, 2

(1. 中国科学技术大学，合肥 230027；2. 核工业西南物理研究院，成都 600041)

收稿日期:2016-02-29 修回日期:2016-11-10 出版日期:2017-03-15 发布日期:2017-03-15
作者简介:王苏豪(1988–)，男，四川乐山人，博士研究生，从事核能科学与工程技术研究。
基金资助:
核能开发(H660003)；国家磁约束聚变核能发展研究专项(2014GB110004)

Thermal-hydraulic computation and analysis for helium cooling ceramic blanket of HCCB-DEMO

WANG Su-hao1, 2, CAO Qi-xiang2, WU Xing-hua2, WANG Xiao-yu2, ZHANG Guo-shu2, FENG Kai-ming1, 2

(1. University of Science and Technology of China, Hefei 230027; 2. Southwestern Institute of Physics, Chengdu 610041)

Received:2016-02-29 Revised:2016-11-10 Online:2017-03-15 Published:2017-03-15

摘要/Abstract

摘要：

根据这几年HCCB-DEMO包层技术的发展，对原氦冷固态氚增殖包层进行相应设计改进。利用三维有限元软件CFX对该改进设计进行了热工水力学计算及分析。分析模型包括：第一壁，增殖单元，筋板以及三者集成模型。结果表明：各子部件在单独分析的情况下，材料最高温度低于设计要求限值；冷却剂进出口温度为300/500°C，满足设计需求。同时对比分析了集成计算及单独计算的结果，得出第一壁与铍球床之间的相互热作用较大，铍球床材料最大温度会高于设计限值。针对经集成计算后发现的问题，未来将对氦冷固态包层的设计进行进一步的优化。

关键词: 示范堆, 氦冷固态氚增殖包层, 3D计算流体动力学

Abstract:

With the development of HCCB-DEMO blanket technology, an updated conceptual design of helium cooled blanket with ceramic breeder was proposed. Based on 3D FEM software ANSYS CFX，thermal-hydraulic analysis including first wall model, breeder unit model, stiffen grid model and integration model for HCCB blanket is presented in this paper. The results demonstrate that the maximum temperature of each material is in design limits; inlet/outlet temperature of coolant is 300/500°C under the independent analysis of sub-components, which indicate that the design requirements are satisfied. Comparing with three independent analysis models, the integration results showed that the thermal interaction between first wall and Be pebble bed have important influence; the maximum temperature of Be pebble bed exceeded the design limits. A series of optimization design for HCCB blanket focused on these problems would be the next step.

Key words: DEMO, Helium cooling ceramic breeder blanket, 3D computational fluid dynamics

中图分类号:

TL62+1

王苏豪1, 2，曹启祥2，武兴华2，王晓宇2，张国书2，冯开明1, 2. HCCB-DEMO氦冷固态包层热工水力计算及分析[J]. 核聚变与等离子体物理, 2017, 37(1): 58-63.

WANG Su-hao1, 2, CAO Qi-xiang2, WU Xing-hua2, WANG Xiao-yu2, ZHANG Guo-shu2, FENG Kai-ming1, 2. Thermal-hydraulic computation and analysis for helium cooling ceramic blanket of HCCB-DEMO[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2017, 37(1): 58-63.

参考文献

[1] Pan C H, Wu Y C, Feng K M, et al. DEMO development strategy based on China FPP program [J]. Fusion Engineering and Design, 2008, 83(7–9): 877–882.

[2] Feng K M, Zhang G S, Zheng G Y, et al. Conceptual design study of fusion DEMO plant at SWIP [J]. Fusion Engineering and Design, 2009, 84(12): 2109–2113.

[3] 郑国尧, 冯开明. HCSB-DEMO 等离子体参数的确定与初步分析 [J]. 核聚变与等离子体物理, 2007, 27(3): 212.

[4] 武兴华, 赵奉超, 赵周, 等. HCSB-DEMO 包层热工水力及中子学计算 [J]. 核聚变与等离子体物理, 2011, 31(3): 235–240.

[5] Feng K M, Pan C H, Zhang G S, et al. Progress on solid breeder TBM at SWIP [J]. Fusion Engineering and Design, 2010, 85(10): 2132–2140.

[6] Feng K M, Pan C H, Zhang G S, et al. Progress on design and R&D for helium-cooled ceramic breeder TBM in China [J]. Fusion Engineering and Design, 2012, 87(7–8): 1138–1145.

[7] Wang P, Chen J, Xu Z, et al. Research and development of reduced activation ferritic/martensitic steel CLF-1 at SWIP [C]. 23rd IAEA Fusion Energy Conference, Republic of Korea, 2010.

[8] Pinghuai W, Jiming C, Haiying F, et al. Technical Issues for the Fabrication of a CN-HCCB-TBM Based on RAFM Steel CLF-1 [J]. Plasma Science and Technology, 2013, 15(2): 133.

[9] 张受谦. 化工手册 [M]. 济南: 山东科学技术出版社, 1986.

[10] Reimann J, Piazza G, Harsch H. Thermal conductivity of compressed beryllium pebble beds [J]. Fusion Engineering and Design, 2006, 81(1): 449–454.

[11] Feng K M, Zhang G S, Hu G, et al. New progress on design and R&D for solid breeder test blanket module in China [J]. Fusion Engineering and Design, 2014, 89(7): 1119–1125.

[12] Yagi S, Kunii D. Studies on heat transfer near wall surface in packed beds [J]. AIChE Journal, 1960, 6(1): 97–104.

HCCB-DEMO氦冷固态包层热工水力计算及分析

Thermal-hydraulic computation and analysis for helium cooling ceramic blanket of HCCB-DEMO

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	王俊，张国书，张龙 . 聚变示范堆气体注入系统氚渗透分析[J]. 核聚变与等离子体物理, 2014, 34(3): 240-246.
[2]	郑国尧，冯开明. HCSB-DEMO等离子体参数的确定与初步分析[J]. 核聚变与等离子体物理, 2007, 27(3): 212-216.