大孔径背景场磁体的设计与分析

doi:10.16568/j.0254-6086.201901012

摘要/Abstract

摘要：

基于中国聚变工程实验堆(CFETR)接头的设计要求，提供了一种大孔径背景场磁体的设计方案。构造出大孔径背景场磁体的结构，利用背景场磁体来得到相应的磁场数据，对比研究磁体的参数对磁场的影响，得出相关参数的变化规律。利用Gandalf 程序模拟计算出CFETR 接头背景场磁体的分流温度，考虑到液氦的流体力学性能，采用Gandalf 程序模拟超导股线的失超行为，估算出较为精确的最小失超能。将最小失超能作为Q₀ 值代入到程序中得出热斑温度值，分析结果表明，设计符合要求，为CFETR 高温超导接头的制作和实验提供了可靠依据。

关键词: 背景场磁体, 高温超导, Gandalf 程序, 结构设计, 数值模拟

Abstract:

A design scheme of large aperture field magnet is provided based on the design requirements of the China Fusion Engineering Testing Reactor (CFETR) joints. Using the background field magnet to get the corresponding magnetic field data, the influence of the magnet parameter on the magnetic field is compared, and the corresponding magnetic field data are obtained. Gandalf program was used to simulate the shunt temperature of CFETR field magnet under operating conditions. Considering the hydrodynamic performance of liquid helium, Gandalf program was used to simulate the quench behavior of superconducting strands and to estimate the more accurate minimum quenching energy. The minimum quench value can be used as the Q₀ value inputted into the program to obtain hot spot temperature value. The analysis shows that the design meets the requirements for the production of high temperature superconducting magnets and provide reliable basis for manufacture and experiments.

Key words: Background field magnet, High temperature superconducting magnet, Gandalf code, Structure design

中图分类号:

TL62+2

杨皓君1, 2，陆坤1，荣建1. 大孔径背景场磁体的设计与分析[J]. 核聚变与等离子体物理, 2019, 39(1): 76-82.

YANG Hao-jun, LU Kun, RONG Jian. Design and analysis of large aperture background field magnets[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2019, 39(1): 76-82.

参考文献

[1] Ghosh A K, Sampson W B, Bauer P, et al. Minimum quench energy measurements on single strands for LHC main magnets[J]. Applied Superconductivity IEEE Transactions on, 1999, 9(2): 252−256.

[2] 王林章. 螺线管电感的计算与测量[J]. 电测与仪表,1982, (11): 14−18.

[3] 王任波, 陈鑫, 勾艳凤. 高温超导电磁铁磁场衰减时间常数特性研究[J]. 低温物理学报, 2014, (4):294−297.

[4] Bottura L, Zienkiewicz O C. Quench analysis of large superconducting magnets. Part I: model description[J].Cryogenics, 1992, 32(7): 659−667.

[5] Rhyner J. Magnetic properties and AC-losses of superconductors with power law current-voltage characteristics[J]. Physica C Superconductivity, 1993,212(3–4): 292−300.

[6] Rhyner J. Vector potential theory of ac losses in superconductors[J]. Physica C Superconductivity & Its Applications, 2002, 377(1–2): 56−66.

[7] Sedlak K, Bruzzone P, Devred A, et al. DC performance results versus assessment of ITER main busbar NbTi conductors[J]. IEEE Transactions on Applied Superconductivity, 2015, 25(3): 1−4.

[8] Bottura L. A practical fit for the critical surface of NbTi[J]. Applied Superconductivity IEEE Transactions on,1999, 10(1): 1054−1057.

[9] Mitchell N. Steady state analysis of non-uniform current distributions in cable-in-conduit conductors and comparison with experimental data[J]. Cryogenics, 2000,40(2): 99−116.

[10] Bruzzese R, Chiarelli S, Gislon P, et al. Critical currents and AC losses on subsize cables of the NET-EM/LMI 40kA Nb3Sn cable-in-conduit conductor prototype[J].IEEE Transactions on Magnetics, 1991, 27(2):2198−2201.

[11] Rong J, Huang X Y, Song Y T, et al. Hotspot temperature calculation and quench analysis on ITER busbar[J].Fusion Engineering & Design, 2014, 89(12): 2971−2974.

[12] 荣建. 超导托卡马克磁体和馈线系统关键电磁学问题研究[D]. 合肥: 中国科学技术大学, 2016.

[13] Wilson M N. Computation of minimum quench energies in LHC cables[R]. 1997.

[14] LI Shaolei, WU Yu, LIU Bo, et al. Current sharing temperature test and simulation with GANDALF code for ITER PF2 conductor sample[J]. Plasma Science &Technology, 2011, 13(5): 627−630.

[15] ITER 2009 design description document DDD11-3[R].Magnets ITER_D_2NHKHH v1.5.