聚变堆第一壁连续W/Cu 梯度材料的热工性能优化

doi:10.16568/j.0254-6086.201603011

核聚变与等离子体物理 ›› 2016, Vol. 36 ›› Issue (3): 247-253.DOI: 10.16568/j.0254-6086.201603011

聚变堆第一壁连续W/Cu 梯度材料的热工性能优化

赵永强1，黄生洪*1，汪卫华2

(1 中国科学技术大学工程科学学院，合肥 230026；2. 陆军军官学院应用物理研究所，合肥 230031)

收稿日期:2015-04-02 修回日期:2016-02-29 出版日期:2016-09-15 发布日期:2016-09-14
作者简介:赵永强(1989-)，男，四川绵阳人，硕士，主要从事聚变堆装置热工结构研究。
基金资助:
国家磁约束核聚变能发展研究专项(2015GB121007；2013GB113000)

Thermo-technical performance optimization on first wall in fusion reactor applied with continuous W/Cu functionally graded material

ZHAO Yong-qiang1, HUANG Sheng-hong1, WANG Wei-hua2

(1. University of Science and Technology of China, School of Engineering Science, Hefei 230026; 2. New Star Institute of Applied Technology, Hefei 230031)

Received:2015-04-02 Revised:2016-02-29 Online:2016-09-15 Published:2016-09-14

摘要/Abstract

摘要：

针对不同体积分布指数p的W/Cu连续功能梯度材料的偏滤器第一壁结构，采用有限元软件计算了 8MW•m⁻²稳态运行热加载以及等离子体破裂条件下1GW•m⁻²热流冲击下的力学响应。相同稳态加载条件下，W/Cu 连续功能梯度材料的最优分布指数与分层梯度材料存在较大差异，其最优等效应力比分层梯度材料要小26%，表现出更优异的性能。在热冲击响应过程中，连续梯度W/Cu材料塑性损伤随p值不同也存在较大变化，其最优p值与其稳态运行时热应力最优p值存在一定差异，从第一壁应用条件考虑，应综合选取，最佳p值在1.2附近。综合来看，连续梯度W/Cu材料具有更连续变化的热物理属性及力学性能，在聚变堆第一壁结构设计中具有更大的应用潜力。

关键词: 第一壁, 面向等离子体部件, 等离子体破裂, 热冲击, 连续梯度材料, 有限元数值模拟

Abstract:

The thermo-technical performance optimization on first wall in fusion reactor made by such continuous W/Cu graded material with different composition distribution parameter p was descrided The thermal/mechanical responses of the first wall mockup under steady-state heat loads of 8MW•m⁻² and heat shock loads of 1GW•m⁻² during plasma disruptions are computed numerically with the finite element method. Under the same steady heat load conditions, the optimized composition distribution parameter p for composition continuous W/Cu graded material is very different with that of previous quasi-continuous W/Cu graded material. A 26% reducing in thermal stress is observed for first wall with composition continuous W/Cu graded material, demonstrating a more excellent performance. In the process of heat shock, the damage degree measured by volume fraction of plastic deformation is changing with different composition distribution parameter p, its optimized value is different with that obtained in steady state conditions. In consideration of environment conditions endured by first wall, the optimized value should be chosen to be close to 1.2. In general, there is a more prominent advantage for composition continuous W/Cu graded material applied in first wall design of fusion reactor due to its continuous variation of thermal physical properties and mechanical properties.

Key words: First wall, Plasma facing component, Plasma disruptions, Thermal shock, Continuous functionally graded materials, Finite element method.

中图分类号:

TL62+7

赵永强1，黄生洪*1，汪卫华2. 聚变堆第一壁连续W/Cu 梯度材料的热工性能优化[J]. 核聚变与等离子体物理, 2016, 36(3): 247-253.

ZHAO Yong-qiang1, HUANG Sheng-hong1, WANG Wei-hua2. Thermo-technical performance optimization on first wall in fusion reactor applied with continuous W/Cu functionally graded material[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2016, 36(3): 247-253.

参考文献

[1] Parker R, Janeschitz G, Pacher H D, et al. Plasma-wall interactions in ITER[J]. J. Nucl. Mater., 1997, 241:1−26.
[2] 种法力, 陈俊凌, 李建刚. Tokamak第一壁上W／Cu材料的连接和界面应力的研究[J]. 稀有金属与硬质合金, 2005, 33(4): 38−41.
[3] You J H, Bolt H. Analytical method for thermal stress analysis of plasma facing materials[J]. J. Nucl. Mater.,2001, 299(1): 9−19.
[4] 韩杰才, 徐丽, 王保林, 等. 梯度功能材料的研究进展及展望[J]. 固体火箭技术, 2004, 27(3): 207−215.
[5] Itoh Y, Takahashi M, Takano H. Design of tungsten/copper graded composite for high heat flux components[J]. Fusion Engineering and Design, 1996, 31(4):279−289.
[6] Gasik S U M. Thermal-elasto-plastic analysis of W-Cu functionally graded materials subjected to a uniform heat flow by micromechanical model[J]. Journal of Thermal Stresses, 2000, 23(4): 395−409.
[7] Ueda S. Thermoelastic analysis of W-Cu functionally graded materials subjected to a thermal shock using a micromechanical model[J]. Journal of Thermal Stresses,2001, 24(1): 19−46.
[8] Yang Z, Liu M, Deng C, et al. Thermal stress analysis of W/Cu functionally graded materials by using finite element Mmthod[J]. J. Phys., 2013, 419(1): 012051.
[9] 朱大焕, 王坤, 王先平, 等. 偏滤器第一壁W/Cu FGM 的热应力模拟与优化设计[J]. 稀有金属材料与工程,2011, 40(9): 1658−1661.
[10] 凌云汉, 白新德, 葛昌纯. 偏滤器部件W/Cu 功能梯度材料的热应力缓和[J]. 清华大学学报:自然科学版,2003, 43(6): 750−753.
[11] 郭世斌, 李江涛, 陈义祥, 等. 一种钨/铜梯度材料及其制备方法[P]. 中国专利: 201110190106.9, 2013−01−23.
[12] 洪增元. 热冲击作用下功能梯度材料的热弹性耦合分析[D]. 哈尔滨: 哈尔滨工业大学, 2009. 38−40.
[13] Kerner E H. The elastic and thermo-elastic properties of composite media[J]. Proceedings of the Physical Society,1956, 69: 808−810.
[14] Arnoux G, Bazylev B, Lehnen M, et al. Heat load measurements on the JET first wall during disruptions[J].J. Nucl. Mater., 2011, 415(1): S817−S820.
[15] Ogorodnikova O V, Roedig M, Linke J. Parametric investigation of temperature evolution in actively cooled plasma-facing components during high heat fluxes[R].32nd EPS Conference on Plasma Phys. Tarragona, 27June-1 July 2005 ECA Vol. 29C, P-1.027.

聚变堆第一壁连续W/Cu 梯度材料的热工性能优化

Thermo-technical performance optimization on first wall in fusion reactor applied with continuous W/Cu functionally graded material

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	黄文玉, 李连才, 蔡立君, 刘雨祥, 赖春林, 刘小钰, 刘宽程, 宋斌斌, HL-M研制团队. HL-2M 初始等离子体第一壁安装研究[J]. 核聚变与等离子体物理, 2021, 41(s1): 346-350.
[2]	王一鸣，黄攀，谌继明，王平怀. W/Fe/CuCrZr热等静压模块组织及性能分析[J]. 核聚变与等离子体物理, 2021, 41(2): 124-130.
[3]	赵宝玲1，谌继明2,吴晶2，康伟山2. ITER第一壁铍铜连接部件在高热负荷作用下的热性能分析[J]. 核聚变与等离子体物理, 2021, 41(2): 157-161.
[4]	周毅，谌继明*，王平怀，但敏，金凡亚. 脉冲磁控溅射MoS2-Ti涂层常温及高温真空摩擦磨损性能[J]. 核聚变与等离子体物理, 2020, 40(2): 135-141.
[5]	吴晶，王平怀*，谌继明，袁涛，朱小波，李前，高翚，康伟山. 管道连接装配型ITER增强热负荷第一壁的初步设计[J]. 核聚变与等离子体物理, 2020, 40(1): 65-71.
[6]	陈艳宇1，王平怀1，王英敏2，谌继明1，吴继红1. 退火对钛/铜热等静压扩散连接界面的影响[J]. 核聚变与等离子体物理, 2019, 39(3): 243-248.
[7]	王亚磊，才来中，胡万鹏. 面向等离子体部件沉积特性的数值模拟研究[J]. 核聚变与等离子体物理, 2019, 39(2): 119-126.
[8]	谭扬，练友运，封范，陈哲，王建豹，刘翔*. 氘等离子体预辐照对W-Y2O3合金耐热冲击性能的影响[J]. 核聚变与等离子体物理, 2019, 39(2): 151-157.
[9]	刘佰奇1，阳倦成2，齐天煜1，任东伟1，倪明玖1. 水平磁场中液态锂膜流动实验装置及初步结果[J]. 核聚变与等离子体物理, 2019, 39(1): 62-67.
[10]	柳世民，黄生洪*. 边缘局域模热流冲击下偏滤器铜夹层疲劳行为的数值模拟[J]. 核聚变与等离子体物理, 2019, 39(1): 68-75.
[11]	訾鹏飞1, 2，曹磊1，李磊1，韩乐1，刘严伟1, 2，姚达毛1. EAST 第一壁水冷结构类型传热能力的比较分析[J]. 核聚变与等离子体物理, 2018, 2(4): 459-465.
[12]	康伟山, 谌继明, 吴继红, 袁涛, 王平怀. ITER屏蔽包层第一壁人工缺陷模块热传导计算与分析[J]. 核聚变与等离子体物理, 2018, 2(3): 299-304.
[13]	冷桢1，谌继明1，王坤2，康伟山1，黄攀1. ITER第一壁铍-铜界面缺陷的热应力及弹塑性结构分析[J]. 核聚变与等离子体物理, 2018, 2(2): 199-204.
[14]	吴玉程1, 2，卫勇1，罗来马1, 2，昝祥1, 2，朱晓勇1, 2，罗广南3，陈俊凌3. 第一壁材料用纳米结构氧化物弥散强化钢制备工艺及其性能研究进展[J]. 核聚变与等离子体物理, 2018, 2(1): 110-116.
[15]	刘丹华，王平怀，李前，杨波，金凡亚，谌继明*，ITER屏蔽包层组. ITER第一壁模块Be/Cu连接失效分析[J]. 核聚变与等离子体物理, 2017, 37(3): 302-307.