欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2013, Vol. 33 ›› Issue (3): 267-271.

• 核聚变工程技术 • 上一篇    下一篇

高功率微波陶瓷窗的结构优化

汤允迎,王晓洁,刘甫坤,刘 亮,赵连敏,贾 华   

  1. (中国科学院等离子体物理研究所,合肥 230031)
  • 收稿日期:2012-11-23 修回日期:2013-03-28 出版日期:2013-09-15 发布日期:2013-09-13
  • 作者简介:汤允迎(1987-),女,安徽桐城人,硕士研究生,微波工程专业。
  • 基金资助:

    国家磁约束核聚变能研究专项资助(2010GB105001);国家自然科学基金资助项目(10905069,11205195);中国科学院合肥研究院院长基金“火花”课题资助(Y15FZ10132)

Structure optimization of high power microwave ceramic window

TANG Yun-ying, WANG Xiao-jie, LIU Fun-kun,LIU Liang, ZHAO Lian-min, JIA Hua   

  1. (Institute of Plasma Physics, Chinese Academy of Science, Hefei 230031)
  • Received:2012-11-23 Revised:2013-03-28 Online:2013-09-15 Published:2013-09-13

摘要:

介绍了2.45GHz频率高功率微波陶瓷窗的结构及对结构的优化。结构优化包括对结构尺寸和水冷结构的水流率取值这两方面。当陶瓷片厚度为4.4mm、圆波导长度为52.3mm时,微波性能达到最优。当水冷结构的水流率为0.4t×h-1时,效果最理想,此时陶瓷片的最大应力值远远小于陶瓷片本身的抗拉强度。优化后的陶瓷窗经过多轮实验的考验,没有出现破裂等问题。

关键词: 陶瓷窗, 结构尺寸优化, 水流率优化

Abstract:

The structure and its optimization of 2.45GHz high power microwave ceramic window are introduced in this paper. The structure optimization includes optimization of structure dimensions and coolant flowing rate. The microwave properties are sufficient when the thickness of ceramic disk is 4.4mm and the length of cylindrical waveguide is 52.3mm. The maximum thermal stress on the ceramic disk is far less than the limitation that ceramic disk could sustainable stress when the coolant flowing rate is 0.4t×h-1 . Optimized ceramic window did not appear crack problem after several runs of experiments.

Key words: Ceramic window, Optimization of structure dimensions, Optimization of coolant flow

中图分类号: