欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2012, Vol. 32 ›› Issue (4): 351-355.

• 核聚变工程技术 • 上一篇    下一篇

4MW EAST-NBI离子源引出系统装配

李 军,胡纯栋,谢亚红,韦江龙   

  1. (中国科学院等离子体物理研究所,合肥 230031)
  • 收稿日期:2012-03-13 修回日期:2012-08-27 出版日期:2012-12-15 发布日期:2012-12-14
  • 作者简介:李军(1979-),男,山东省莱芜市人,工程师,从事中性束注入加热工程和实验研究。
  • 基金资助:

    国家自然科学基金资助项目(11075183);中科院知识创新人才工程资助项目(强流离子源弧功率反馈物理特性研究)

Assembly of beam extraction system of 4MW EAST-NBI ion source

LI Jun, HU Chun-dong, XIE Ya-hong, WEI Jiang-long   

  1. (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)
  • Received:2012-03-13 Revised:2012-08-27 Online:2012-12-15 Published:2012-12-14

摘要:

根据EAST-NBI大面积束引出系统的特点及装配要求,研究合理的装配方法。通过多种装配方法来消除装配中产生的误差,以到达最大误差小于0.05mm,真空接口漏率小于1×10-7Pa.L.s-1,冷却水管耐压1MPa,通过100kV的静电耐压测试,并进行了离子束引出,初步验证了引出系统装配的成功,支持兆瓦级强流离子源的研制。

关键词: 强流离子源, 束引出系统, 装配

Abstract:

According to the characteristic of extraction system of EAST-NBI and the requests of assembly, the assembly methods were studied. Several methods were used to eliminate the assemble error, and the overall error is less than 0.05mm, the leak rate of vacuum interface is less than 1×10-7Pa.L.s-1, and the resist pressure of cooling water pipe can reach 1MPa. Besides, the extraction system tested with 100kV static high voltage. It is meets the requirement of design of beam extraction system, and ensure the development of mage-watt high current ion source.

Key words: High current ion source, Beam extraction system, Assembly

中图分类号: