ITER实验包层计划综述

核聚变与等离子体物理 ›› 2006, Vol. 26 ›› Issue (3): 161-169.

• 中国ITER氦冷固态实验包层模块（TBM）设计 • 下一篇

ITER实验包层计划综述

冯开明

（核工业西南物理研究院，成都610041）

收稿日期:2005-12-19 修回日期:2006-05-08 出版日期:2006-09-15 发布日期:2012-01-20
作者简介:冯开明（1952-），男，四川仁寿人，研究员，主要从事聚变堆理论与设计工作。

Overview of the ITER test blanket module program

FENG Kai-ming

(Southwestern Institute of Physics, Chengdu 610041)

Received:2005-12-19 Revised:2006-05-08 Online:2006-09-15 Published:2012-01-20

摘要/Abstract

摘要：

简要介绍了ITER计划的发展历程；综述了ITER实验包层模块计划（ITER-TBM）的历史、主要技术路线和最新的设计与研发进展；概述了与实验包层计划相关的DEMO聚变堆的定义与发展策略。最后，介绍了国内开展的基于固体增殖剂概念的ITER实验包层的初步设计概况，对TBM的研发计划提出了建议。

关键词: ITER计划, 实验包层模块, 氚增殖实验

Abstract:

In this paper, the ITER project, the ITER test blanket module (TBM) program and its origin are introduced briefly. The definition and development strategy of DEMO reactor, relevant to the TBM program, are summarized. The design progress and R&D plans of Chinese ITER test blanket module design based on the solid breeder concept are also presented.

Key words: ITER, Test blanket module, Tritium breeding ratio

中图分类号:

冯开明. ITER实验包层计划综述[J]. 核聚变与等离子体物理, 2006, 26(3): 161-169.

FENG Kai-ming. Overview of the ITER test blanket module program[J]. NUCLEAR FUSION AND PLASMA PHYSICS, 2006, 26(3): 161-169.

参考文献

[1] Boccaccini L V. Design description document for the Rebut P H. ITER: the first experimental fusion reactor [J]. Fusion Engineering and Design, 1995，27：3−6.

[2] Aymar R. Status of ITER project [J]. Fusion Engineering and Design, 2002,61−62:5−12.

[3] Vetter J E. Report from the re-established test blanket working group (TBWG) for the period of the ITER transitional arrangement (ITA) [R]. 2001.

[4] Pan C H. Definition and development strategy of DEMO fusion reactor in China [R]. Presented at TBWG-12 meeting, ITER Naka Joint Working Site, 2004.

[5] Gaincarli L. Report from the re-established Test Blanket working group (TBWG) for the period of the ITER Transitional Arrangement (ITA) [R]. 2005.

[6] Abdou M. Suggested US Plans and Strategy for ITER Test Blanket [R]. Presented at APEX/TBM Meeting, UCLA, 2003.

[7] Abramov V, Borisov A, Goroshkin，et al. Design description document for the Russian federation ceramic helium cooled test blanket module, design description document status: 25.05.2001 version 2 [R]. Moscow: 2001.

[8] European Helium Cooled Pebble Bed (HCPB) test blanket modules [R]. ITER FEAT Final Design Report, Forschungszentrum Karlsruhe, June, 2001.

[9] Mikio Enoeda. Design description document for the Japanese helium-cooled solid breeder, test blanket module [R]. ITER FEAT Final Design Report, JAERI, April, 2001.

[10] Feng K M, Zhang G S, Wang X Y, et al. Design description document for the Chinese helium-cooled Solid Breeder Test Blanket Module (CH HC-SB) TBM （intermedial report）[R]. SWIP, 2004.

[11] Feng K M, Huang J H. Transmutation Calculation of ²³⁷Np with a Fusion Reactor [J]. Nucl. Eng. Design, 1995: 50.

[12] Feng K M, Zhang G SH, Deng M G. Transmutation of minor actinides in a spherical torus tokamak fusion reactor, FDTR [J]. Fusion Engineering and Design, 2002, 63-64 : 127.

[13] 冯开明. 中国DEMO聚变堆 [R]. 三亚: 中国DEMO聚变堆发展战略研讨会, 2005.

[14] 黄锦华, 盛光昭, 施汉文, 等. 托卡马克工程实验混合堆概念设计 [J]. 核聚变与等离子体物理, 1990, 10(4): 193-208.

[15] Huang J H, Feng K M, Zhang G S, et al. Overview of fusion-fission hybrid reactor design study in China [J]. Fusion Science and Technology, 2002, 42(6): 138-145.

[16] Feng K M. Design description document for the Chinese helium-cooled solid breeder test blanket module (CH HC-SB) TBM (Final Report) [R]. Chengdu: SWIP, 2005.

[17] Feng K M, Pan C H. Preliminary design for a China ITER test blanket module [J]. Nucl. Eng. Design , 2005.

[18] Feng K M.Progress and status of CH HC-SB TBM program[R].Presented at the ITER TBWG-16 Meeting, Beijing: 2005.

ITER实验包层计划综述

Overview of the ITER test blanket module program

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics

[1]	周冰，冯勇进，王晓宇，武兴华. 硅酸锂球床等效导热率研究[J]. 核聚变与等离子体物理, 2018, 2(1): 99-104.
[2]	王艳灵，张龙，叶兴福，王小勇. 中国氦冷固态实验包层模块冷却系统换热器管道破裂事故初步分析[J]. 核聚变与等离子体物理, 2016, 36(4): 328-333.
[3]	王泽明，胡刚，陈路，陶海燕，陈高詹，叶兴福，王平怀，俞德怀，王世忠，李勇，冯开明. 中国固态增殖剂实验包层小模块工程结构设计与研制工艺探讨[J]. 核聚变与等离子体物理, 2015, 35(2): 125-130.
[4]	汪卫华，程德胜，冯开明，邓海飞. 中国 HCCB-TBM 氚增殖球床热工水力学特性数值模拟[J]. 核聚变与等离子体物理, 2014, 34(3): 200-206.
[5]	张一鸣1，曾丽萍1，沈欣媛2，张利1，丁亚清1，肖成馨1，康卫红1，王海1. ITER计划与聚变能发展战略[J]. 核聚变与等离子体物理, 2013, 33(4): 359-365.
[6]	钟原，罗天勇. 单轴扩散焊接中管道变形的初步仿真分析[J]. 核聚变与等离子体物理, 2013, 33(1): 48-53.
[7]	陈颜静，冯开明，张国书，栗再新. 主破裂事故下中国固态实验包层模块电磁场分析[J]. 核聚变与等离子体物理, 2012, 32(4): 338-343.
[8]	韩静茹, 陈义学, 张国书, 曹启祥. 中国2×6固态实验包层模块活化计算分析[J]. 核聚变与等离子体物理, 2011, 31(4): 344-349.
[9]	叶兴福，冯开明，罗天勇，张国书. ITER TBM第一壁制造方法与样件试制[J]. 核聚变与等离子体物理, 2011, 31(4): 356-359.
[10]	赵周，冯开明，张国书，袁涛. 中国ITER固态增殖剂实验包层模块第一壁瞬态热分析[J]. 核聚变与等离子体物理, 2009, 29(4): 348-352.
[11]	袁涛, 冯开明, 李增强, 赵周. 中国氦冷却固态增殖剂实验包层热工设计[J]. 核聚变与等离子体物理, 2009, 29(2): 152-155.
[12]	袁涛，冯开明，王晓宇，陈志. ITER氦冷固体氚增殖剂实验包层模块结构设计[J]. 核聚变与等离子体物理, 2006, 26(3): 195-200.
[13]	李增强，冯开明，张国书，袁涛. 中国氦冷固态增殖剂试验包层模块中子学计算[J]. 核聚变与等离子体物理, 2006, 26(3): 201-204.