欢迎访问《核聚变与等离子体物理》官方网站,今天是 分享到:

核聚变与等离子体物理 ›› 2010, Vol. 30 ›› Issue (4): 360-364.

• 核聚变工程技术 • 上一篇    下一篇

磁探针参数的标定

戴晓静,沈飙,刘广君   

  1. (中国科学院等离子体物理研究所,合肥 230031)
  • 收稿日期:2010-04-19 修回日期:2010-08-17 出版日期:2010-12-15 发布日期:2011-01-26
  • 作者简介:戴晓静(1986-),女,江西婺源人,硕士,主要从事电磁测量误差分析方向的研究。
  • 基金资助:

    国家自然科学基金资助项目(10835009);中国科学院知识创新工程重要方向性项目(KJCX3.SYW.N4)

Calibration of magnetic probe parameters

DAI Xiao-jing, SHEN Biao, LIU Guang-jun   

  1. (Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031)
  • Received:2010-04-19 Revised:2010-08-17 Online:2010-12-15 Published:2011-01-26

摘要:

为了标定EAST装置电磁测量系统中的磁探针位置偏差和回路增益,通过分析该装置中的误差源,设计了极向场线圈的通电模式。运用格林函数等算法程序对测量数据进行预处理,利用简化的泰勒线性展开,结合带权重的最小二乘法对数据进行多次循环迭代,拟合出磁探针的位置偏差和回路增益。实验结果表明,使用该方法标定是合理的。

关键词: 电磁测量, 误差分析, 格林函数, 泰勒展开, 最小二乘法

Abstract:

In order to calibrate the offset of the magnetic probe position and loop gain of the electromagnetic measurement system in EAST tokamak, the discharge mode of the poloidal field coils is designed through the analysis of the error sources.The measurement data is preprocessed by Green function, then using the simplified Taylor linear expansion ideas, combined with least squares method with weights, the offset of the magnetic probe position and the loop gain is fitted after cycle-iteration. Experimental results show that this calibration method is reasonable.

Key words: Electromagnetic measurement, Error analysis, Green function, Taylor expansion, Least squares

中图分类号: